This video was captured during an in-situ heating stage SEM experiment using a secondary electron camera at the University of Manchester, UK. The Ti-6Al-4V sample was heated to 1000°C to the full β-phase field and then slowly cooled (0.3°C/s) through the β transus, and the α-phase nucleation was recorded by the contrast change in the secondary electron camera from topography development on the sample surface due to surface relief. Microscope operated by Dr Alec E Davis and Dr Jack Donoghue, sample preparation by Nick Byres. These results were published in an Acta Materialia paper in 2021:
Acta Materialia paper: doi.org/10.101...
Researchgate (free peer reviewed preprint): bit.ly/3EHs7Na
Video doi: doi.org/10.528...
This research was supported by grants: Open Architecture Additive Manufacturing (OAAM, Innovate UK), NEWAM (EPSRC EP/R027218/1), LightForm (EPSRC EP/R001715/1), Henry Royce Institute for Advanced Materials (EPSRC EP/R00661X/1, EP/S019367/1, EP/P025021/1, and EP/P025498/1).
alec.davis@manchester.ac.uk
/ alec_e_davis
/ alecdavis1986
www.royce.ac.uk/
www.materials....
29 сен 2024