Transform Your Lawn Mower: Quick Seat Reattachment Tutorial! 

😁👍

That’s awesome! Thanks for watching and taking the time to leave a comment. I spend a lot of time trying to hook switches up that others have bypassed on these old mowers.

Thats awesome! I have Facebook and Instagram accounts with the same BALDAGLE242 name. You’re welcome to share pics or videos there if you like. 😁👍

@@baldeagle242 I will check it out. I noticed yesterday, the seat is already coming lose on the bottom. May have to reglue on the bottom side, towards the steering wheel.

Thank you John. 😁👊

Thank you my friend. I appreciate you stopping by and taking the time to leave a comment. 😁👍

+John G Thank you! I hope to see you around on future videos. 😁👍

Thanks for stopping by my friend. I hope you are doing well. 😁👍

@@baldeagle242 all good mate

Thank you David. I appreciate you stopping by and taking the time to leave a comment. 😁👍

Thank you Bill. 😁👍

So far it’s holding up very well. I’ve been using this mower all summer and it’s still holding up. Thanks for taking the time to leave a comment. I hope to see you around on future videos. 😁👍

Thank you my friend. 😁👍

Thank you my friend. I appreciate you taking the time to leave a comments. 😁👍

Thank you. 😁👍

This is more of a repair for an owner that has the time to put into it. The total cost of materials for this job was around $30 including the clamps. It took me about an hour and a half total labor time over two days by the time the adhesive cured. For someone to do this in a shop would not be cost effective and a new seat would be the better way to go. Thanks for watch and taking the time to comment. 😁👍

@Daniel Webster Thank you for taking the time to share your comment! I hope to see you around on future videos. 😊👍

Thanks you, and thanks for letting me know Bre sent you. 😁👍

Thank you! Feel free to edit your comment and post a link here if you like. I’ll check it out. 😁👍

That’s awesome! Thanks for taking the time to leave a comment. We hope to see you around on future videos. 😁👍

You’re welcome my friend. I had a few people tell me the subscribed to your channel after seeing the shoutout. Hopefully we will get you to that magical 1000 soon. If anyone hasn’t checked out @LewisMowersandBoats yet consider checking him out. Great guy with a lot of knowledge. 😁👍

You’re welcome. Thanks for taking the time to leave a comment. Here’s a link to other videos I’ve made that you may find interesting. Baldeagle242 Video History! ru-vid.com/group/PL5_ZXmQpcjpZLAMEskeAYolqvhFSN_X4m

Thank you,Dave. I hope you are doing well. 😁👍

I’ve never tried liquid nails. I’m not sure.

I’ve never tried to repair one of the metal seats. Hopefully someone else can comment with opinions they’ve used.

I actually just finished a few other things on this mower today and posted a short little video earlier today. It’s been about four months since I fixed the seat and so far it’s held up very well. ru-vid.comowpZPZ9Ihrk?si=Mb2EnAqyOoaPxBKz

Thank you for the info I’m going to Home Depot tomorrow to get the glue tube of for the gun why can’t you just use it on all of it ? Why do you need two different Loctite glue’s

@@josephwagner2729 You don’t need much on the foam itself. My concern was that the adhesive would be too aggressive and may cause the foam to deteriorate. If I remember correctly there was also a notice on the adhesive not to use it on foam. I recommend reading the label before trying it. If you go forward with it let us know how it works out.

Thank you. We hope to see you around on future videos. 😁👍

😁👍

+@duaneaho2805 It’s holding up very well. Thanks for watching! Here’s a link to other videos I’ve posted that you may find useful. ru-vid.com/group/PL5_ZXmQpcjpac4UV8OW8g-IWVCR8tqy79&si=RKfnQL-PAcZFy67a

Thanks for taking the time to leave a comments. We hope to see you around on future videos. 😁👍

I would only address the part that has come loose.

I’m sure mineral spirits would work also.

Yes, generally that’s caused be rust and corrosion. If it’s not to bad a light penetration oil can free it up and get it working again.

I don’t see many Gators here. I’m not sure how the seats mount onto them. I’d go to eBay or Amazon and see if you can find a listing that shows the mounting holes and location. I’m sure it can be “made to work” but I’m not sure if it will bolt right on or not.

Emery cloth, often referred to as "sandpaper on a cloth," is a versatile abrasive material that is commonly available in the form of a roll. It consists of a durable fabric backing embedded with abrasive particles. The abrasive coating on emery cloth is typically made of aluminum oxide or silicon carbide, which provides the necessary grit for sanding and smoothing surfaces. On the other hand, Scotch Brite pads offer a different approach to abrasive materials. These pads are composed of a porous fiber matrix infused with abrasive particles. The fibers create a three-dimensional structure that helps in distributing the abrasives evenly across the surface being worked on. Scotch Brite pads are designed to be more flexible and conform to various shapes and contours, making them suitable for intricate tasks. Either emery cloth or Scotch Brite pads would be suitable for the job at hand. Both options can effectively accomplish tasks that involve surface preparation, cleaning, or light sanding. Emery cloth, with its sandpaper-like texture, provides a more aggressive cutting action and is ideal for tasks that require heavier material removal or rougher surfaces. It is commonly used in metalworking and woodworking applications, where it can smooth rough edges, remove rust or paint, and prepare surfaces for painting or finishing. On the other hand, Scotch Brite pads are known for their versatility and gentle yet effective abrasion. The porous fiber structure allows for better control and finesse, making them suitable for tasks such as cleaning delicate surfaces, removing light blemishes or stains, and achieving a smooth finish on various materials. Scotch Brite pads are commonly used in automotive detailing, household cleaning, and even in food preparation areas where non-scratch materials are required. Ultimately, whether you choose emery cloth or Scotch Brite pads will depend on the specific requirements of your project, the type of surface you are working on, and the level of abrasion needed. Both materials have their unique characteristics and can be effective in their respective applications.