Okay I thing that I am now missing something, no video can explain that to me. I have 2 desktop computer, by using the same hard drive switching computer, in one box the windows starts with no problem, just as normal, on the other hand, if I take the same drive and put on the other computer box, then that msg comes on the screen that says "Reboot and select proper boot device or insert Boot media in selected boot device and press a key" Okay here is the thing, by using the same drive in different boxes, in one it starts and on the other its fails to start. from the box that refuses to start the windows, I already have changed cables to new ones, and as well as the cables from the other box that can start the drives, and it gives the same error, I changed some settings from the BIOS on the box that can't start the windows on the same drive, and still gives the same problem, I put back the setting and still gives the same issue. The question is, why by using the drive on a different computer it can start, but when I get it back to my box, it gives me that Booting error?
0:30 there’s actually another reason, I built a brand new pc turned on for the first time and it goes to the normal American Megatrend black page where you will hit Y or N, I accidentally hit Y moving my keyboard and it took me to this boot screen, not sure how to fix it 😂
I have a laptop and its not turning on.. i ask my neighbor electrician or programmer to chedk what is the problem.. and i see the same thing you do updating may laptop to windows 10 but Its not work...he said you need to by a new harddrive.. Is that ok if i just buy a harddrive and put it in and ask him to update my windows? And my laptop will work??
I have fixed mine i disconnected a drive that didnt have windows on it but i needed to select that hdd other than the ssd and than after restarting stting it back to the ssd (when i booten on the hdd i still booted from ssd)
pls i need help im tyiping from my PC has this problem but whenever I try to press f2 it doesn't let me and I've tried all the other buttons like ctrl + alt +DEL and it still doesn't work because it doesn't give me time to press them and I spam the buttons and it still doesn't work and idk what to do anymore please help me
@@paultristan2094 yes i reset the cmos, look up how to reset it, but u basically have to remove the cmoss battery "shaped like a circle" leave it for a few minutes and put it back on also in my case my mother board (where the cmos battery is located at) didnt have a circle cmos battery it just had something i could connect a cable to but no cable was connected so i just put a plain screwdriver between the metals where u connect it and it reset my cmos
He presses a key to restart at the very beginning. None of my usb inputs work to restart (keyboard, mouse, keypad) I cannot get out of the error screen and into bios to change my boot order
@@ssebhduck what I ended up having to do was take a screwdriver and hold it between 2 small metal standoffs on the mobo for 15 seconds. I did a factory reset on bios. I changed all settings to what they should be and now its all good.
what if keyboard not working bsta naka lagay is that “reboot and select proper boot device or insert boot media in selected boot device and press a key”
I'm also have this issue to my newly bought pc and so I think that the os I not there as the Code A2 Is displayed on the monitor and thus it doesn't boot to windows or and os but instead it boots to bios screen
How much would it take to fix my pc in this condition . I think my hard disk is corrupted because it's been. 2.6 or2.7 years I have been using and its a pretty cheap pc
SIR MAGKANO PO PAREPAIR NG COMPUTER KPG GNYN ANG ISSUE? ESTIMATE PO IF NEED PLITAN HARDRIVE, GNYN PO KSE ISSUE NG PC KO TOSHIBA HARDRIVE DIN 2018 NAKAINSTALL, HAILAN X6 PO PC KO..
PLEASE HELP I AM TOTAL NEWBIE TO PC..i have ryzen 5 5600x cpu and asrock b550m steel legend mobo. all clean brand new parts (as far as i know) newly built PC. i turned on the PC without monitor to see if it is all working.. the fans working RGBs.. cpu stock cooler fans working and all. i shut it down then turned on again with a monitor this time then i recieve the message says new cpu installed. and i press Y.. then i welcomed to asrock screen with an option to open bios.. as i press F11 the screen message says reboot and select proper boot device.. i dont know what to do please help! 🙏🙏🙏🥺🥺🥺
Didn\t work! Stuck in Aptio Setup Utility on Asus laptop X550J. Did not even recognize usb with windows 11 iso . Got the message to enter bios the battery needs to have at least 20% capacity remaining insert battery and try again. Have never removed battery. the laptop also gets burning hot. no usb available or recognized in the boot options in setup. What to do_=
Hello guys, i had the same issue.. when i was at work, my gf wanted to surprise me and tried to fix this.. she acidentally disabled the “smart settings” and we cant get into it now. When we hit ctrl+alt+delete, the monitor is loading and then we get exact same message. Any tips? :c
Padli nu awan pay ti nakainstall nga windows n rumuar aya tay reboot and select proper boot device or insert boot media in selected boot device and press a key Agyamank
what if it shows both like i have one 250gb ssd where i have all my windows and stuff and a 1tb hdd where i only have games when i select my ssd it doesnt work
Seems you are right about this one here. It need a new windows system too. I have a windows 8 since 2015. Guess it just want updating to work back. Question "how do you have a windows installation setup on your flashdrive/USB?"
Yeah me too I doubt my own hard drive cause I sow it before it was become unrecognizeable it becomes "Bad Hard Drive" but I'm hoping it can be fix via other options
Кароч. Разобираете системник. Снимаете видеокарту, чистите все от пыли с помощью кисточки и пылесоса. Ласттком чистите контакты оперативы. Проверяете контакты на жёсткие диски. Скидываете батарейку cmos на некс минут чтобы биос сбросило. Затем запсюускаете и заходите в биос, включаете в приоритет тот жёсткий на котором у вас ос, перезагружаете и все у вас загрузиться как и у меня)) чудеса какие то. Казалось бы стоит стсиемник никто не трогает и хоба, заеб зашёл)
this exactly helped me but i still have a problem even tho i already solved this issue it happened again when i turned on my pc again but i just pressed f12 and done
okay so i went into my bios to turn secure boot on all i did was turn it on and save and exit . i now have this problem i’ve done everything all these videos say to do but nothing happens
Update !!! so i enabled secure boot, install/load default keys . changes the mode from setup to user . Then i disabled CSM and saved & exit . BOOM LOADED UP like a charm
@@torogipro thats what i think also. is it possible that i can format my ssd to another pc and load a windows in it? because i dont have a USB to boot a windows
@@torogipro i plud my ssd to another pc, and check it in BIOS, i can see the ssd there but when i open the pc to check the visual drive i dont see it only the drive for the own PC