REBUILDING A WRECKED LAMBORGHINI URUS FOR MY GIRLFRIEND 

Tony using a reg plate as a straight edge 🤣🤣🤣 absolutely love it. The guy makes the channel.

Its a good day when Mat uploads

Just a warning guys!! In my younger days I was a Car Panel Beater & Sprayer and I notice you don't ware a mask when grinding/rubbing down seam sealer etc. Watch your lungs as it eventually screwed mine up!! Anything with particles in the air is so poisonous!!

The most genuine no bullshit youtuber out there. Can't imagine hanging out with this legend would be any different to what you see. Congratulations Matt on your success.

I’m an older gent, but love watching what you do on your channel. I especially like the collaboration with your father, my father got me into cars and sadly he passed away too early. Keep up the great work however I do have one suggestion if I might. Please consider more use of PPE (hearing, eye and lung protection). When my father was younger he experienced a traumatic head injury while working under a vehicle. A very large wrench dropped directly on his head fracturing his skull and breaking the orbital bone around his eye. It was a long excruciating recovery. I’ve myself experienced an eye injury that nearly took my eye sight. You have many who follow your channel, please use it to promote safety in your work, there is nothing uncool about being safe.

This channel basically started from Hannah crashing her Audi and now Mat is rebuilding her a Lamborghini Urus. This channel and the whole team are smashing it

Mat. Just want you to know that you and your entire family and friends that make these videos are very much greatly appreciated. Thank you for motivating me to work on my own project cars. Love from Canada!

Hey Mat, quick guide for the death bolt unless you already removed it! - penetrating oil never hurts! - remove nut - find some 4mm-ish washers and tap them into the clamp slots - crank the guts out of the bolt head until it snaps clean off - get yourself a long M10 nut ~25 mm the least, the higher the grade the better, screw on the nut side - screw a long M10 thread stud in there, same applies, higher grade the better - put piece of pipe over it, ~1 inch or so diameter - add washers, a strong nut and start cranking to pull it out! - if you choose to apply !some! heat, try not exceeding 150° C to not alter the properties of the cast. Pulled my 2011 Audis bolts that way like a charm and very cheap!

Matt! Half of those rivets are bad just so you know. Reason being that the stem (the part in the middle) is broken off below the locking collar. In this case the structural capabilities of the rivet are compromised and now it’s not able to hold as well, rivets are easy to remove and replace so I would definitely recommend doing that

Hey Mat! When you do a sealer job, use 646 Thinner, or degreaser (its used by paint shops). Spray it on the sealer, or put your brush into it. Thinner wont make any damage to the sealer, but it make easier for brush to glide on it. Trust me, done this 1000+ times

Mat, even though the Q7 measurements do line up it’s best to use the ones from the Q8 for the closest match. And whenever using Audi parts make sure it’s either for an SQ8 or SQ7 since they use the same engine

I love that yall are doing this kinda work! I’m proud of yall and stoked I was able to teach you some tips and tricks.

Damn, this "poop" break might get me in trouble at work

Great to see more of Hannah getting involved, long may that continue.

I love how you do this craziness, sharing all the struggles and laughs, with your Dad.

The fact you were working on this early this morning and still got your video out today is crazy mate!

I love that Hannah is getting more involved!

The Urus shares the platform and most of its parts with an RSQ8/Q8!

This has to be the coolest channel. Doing incredibly hard things and making it fun. Unreal. One thing Id love to see more is talking about how much everything costed. 🙏🏻🙏🏻🙏🏻

Tony's robot walk at the end was hilarious! :D Good work as always guys. Urus-tar Mat.

“The engine mount is cracked” Tony : hahahahahaha 😂 .. I love this channel so much!! ❤

The reaaon for the lack of panel bond on the chassis leg is because the crumple zone needs to have a specific strength for each structure in order to crumple correctly and provide the most safety. The original prototype design most likely did have panel bond there until the crash test data came back and showed it needed to be weaker in that area.

7:40 Great British Bake Off

The music at the start had me hooked from the get go! Keep her lit Team Armstrong!

This is the second video I’ve watched of these guys building a Lamborghini. Although I’ll probably never own a Lamborghini myself, I’m thoroughly entertained watching the process and I’m genuinely happy for you!

I've done body work for 20 + years and wanted to recommend that when doing seam sealer after getting it on and spread out I always take a rag with some thinner on it and lightly smooth it out. Just use panel wipe down thinner. Hope this helps.

I’ve had a word with everyone who watches these videos and we all agree we like that Hannah the Mechanic is getting involved.

Love the content. 3.45 am is dedication. Well done. Dip a paintbrush in mineral turpentine, then "paint" over the sealer. It will give you the glossy smooth finish you require instead of brushed lines.

Making the front structure stronger with panel bond might compromise its capacity to absorb impacts in case of a crash (I hope you guys never crash this car or at all) so that might be why it didn't have it before. The front structure acts like a pillow together with the engine in case of a crash. Anyway, love the content❤️

Mat love you to bits mate, appreciate all your help and have watched your vids, so proud of everything you've achieved, big shoutout to u, love to hannah, Tony, love him to bits and most of all Kevin your loopy dog! And camera matt, Liam and just everybody that's helped you over the last four years. Big difference from a restaurant car park repairing hannah's tt, to where you're at now, your units and such. Thanks for everything!

Just an idea on why they might not apply panel bond to the up rights with the "funny screws" is the screws may be designed to shear in a crash and the whole upright is part of the front impact/crash structure? Panel bond will stop that absorbing an impact. Just an idea

Hannah has upped her game big time❤

Just FYI, those Flow Drill screws are designed to make their own holes. They heat the plate as they drill into it and tap their own threads. They're not quite the same as the off-the-shelf self-tappers from your local hardware. Look for videos titled "Semblex FDS" and "Semblex Flow Drilling Assembly".

This is the perfect example of words "work with passion, and you will never be tired"

how blessed you are to working so closely and happily with your dad...! I lost mine over 20 years ago...I would give my left leg to spend a day with him - doing anything today....mad respect to you...!!

@9:43 VW AG is actually: Volkswagen AktienGesellschaft, which means Volkswagen stock corporation. they are listed at the stock market. ❤@Mat

I like watching frame repair. It’s riveting.

Those screws are usually applied by a FDS Robot. (Flow Drill Screw) Generally used because they can be applied from one side of the panel. Robots that apply Rivets use a self piercing rivet which uses a die to form the rivet so access to both sides of the panel is required. Been working in Body In White, BIW for a years as a software engineer.

Honestly it's cool to see Hannah helping to build the Lambo :D

Tell you what Matt, watching how confident you are doing this , especially your new skill of spraying, is brilliant. I think it’s easier now you have your chief mechanic,Hannah , helping out. Good Dog boy😂😂

I'm getting into metal working for the first time (initially starting with some light motorcycle stuff) and my dad just bought a full sized car lift for our home shop, we are gonna start flipping cars, turning my hobbies and interests fueled by people like this channel into a profitable side hustle is my dream. Edit: im only 17, applying to colleges and im very very lucky to be in a situation in which i have access to the capital that my parents have and im so happy they can encourage me

Awesome to see Hannah involved! Along with matts dad, what a chanel! Been following since the driveway days and so glad you’ve come this far keep doing what you’re doing 💯

matt acting like a car with no engine or front panels is fully finished. 😂😂❤

Mats mom: “He’s probably out cheating” Mats dad: just hanging out with his son fixing cars 😂

So much talent and modest humour, so very entertaining. Most of us can only dream of renovating a ford fiesta and not to your specification, love it.

7:43 YOO So this is why 🎂 😂

Get yourself some steel rulers mate, a bit easier and more accurate than a tape, a 150, 300 and a 600mm

Mat - I love watching your videos, you, your family and friends are so much fun to watch. Your dad's laughs are contagious, bring a smile to my face. Looking forward to the completed build.

Love that Hannah is getting involved with rebuild her new car 😊

Flow screws are “welded” in. There is no pilot holed drilled, a machine at high speed spins the screw until it creates enough heat that it basically melts the screw into the metal

Bolt boy did a good job today

Great to see Hannah getting involved in her brand new second hand car, she's so lovely what a wonderful family you have. Epic content, thank you ❤

Not sure where Mat gets so much energy from, but he is inspiring and fun to watch.

Little tip Matt, when replacing chassis legs always offer up the subframe / front crossmember before permanently fixing the new parts to check for alignment. Great watch today 👌🤓

Always a great day when you see a new MA upload.

I love that Mat is being such a good son and boyfriend, his parents and girlfriend must be so proud.

The car is coming along great! New subscriber here. You and your teams energy bro really shine on camera. Thank you for making this content. Finally some good wholesome videos to look at.❤

Been working in family bodyshop over 15 years,u make everything look so easy,never overwhelmed,class act mate 👍👍

At 5:45 Tony should be wearing safety glasses. Wire flies out of those wire grinding wheels at a great speed . . .

Mat, I live in Louisiana! Far far away from Leicester! I've been a petrol head all my life but after watching you and Freddie I have to start my career in automotive repair and documentary. Oh, also I'm 41, married with 4 kids. So let's see how it all goes! Lol

There's a wrecked R33 GTR on ebay you need to attempt .. ends in 4 days ... first time doing a classic?

Nice to see hannah getting on the tools again. ✌️ as it is her car 🚙 ✌️ 🇬🇧

Hannah is now chief measurer moving forward! 👍

Matt's parents in DMs: "so when are you rebuilding a lambo for us?"

So great to see Hannah back on the channel

Put the heating on Matt. Hannah is cold at 8:41🥶

Yay, a classic Mat and Dad rebuild! Without the ridiculous mods, kits and skirts.

Good to see Hannah involved. Go Hannah

Anyone else notice Tony’s grandad t-shirt? Is this the reason you got a family size Urus Mat? You keeping another build from us? 👀

Thanks Matt for wearing safety glasses millions of people watch your vlogs and you only have one pair of eyes so MASSIVE THANKS when you work

put masking tape around the brush bristles leaving a quarter of the brush shown for seam sealer Mat

To Mr Armstrong and his son i am Mr Mills from the Trinidad and Tobago 🇹🇹 in the Caribbean , i really enjoys the way you and your dad also enjoy your work, you keep laughing as you work and you jump for joy when you accomplish something, one regret i am to old now to apply all the things you teach 😂

Matt living the best life ever So happy to witness it

Currently sat in A&E with a supposed fractured skull.. this has cheered me up massively 😂

Mat is never pregnant but always delivers good content 👍🏽. Love from Zambia 🇿🇲

Your vibe is infectious, love watching your content!

What a great watch, your positivity is infectious.

Just watching this has made me remember some of your early videos. You have turned into a real good mechanic and repair work. Keep it up bro; proud of you

Isn't the QRS8 chassis closest to a Uros chassis?

welding? lambo: fuck that! get the plaster screws bois

It’s about time Hannah was your wife!!! I could do with a good wedding!! 😂👍

Hi Matt When panels are bonded together the main strength is in the bond. The rivets are to prevent peel. Bond is very strong in shear but not in peel. Imagine sticking two bits of tape together and trying to pull them apart, then peel them apart. On you're trying to break all the glue the other just the very front edge.

DAMN Hannah gat THE GYAAT!!! 7:43

It's crazy how you went from BMX, to learning how to rebuild luxury/exotic cars! That's a dope transition

Love the fact that Hannah is gonna be able to say “We rebuilt this beauty” when talking about Her Urus to friends! 😁 It’s lovely to see you all working as a legit strong team! 👌

THE MAN. THE MYTH. THE LEGEND. THE ONE AND ONLY TONY.

I enjoy the "family" teamwork as much as the build itself. Well done ya'll! 👏

the only problem with your videos is that they make me think I can do that myself, mad respect

Just finished watching ur McLean gull video with my dad his 67year old retired engineer i dont see him much at all as his mostly in a retirement home when ever he does well be watching ur videos as hus so interested in each build and tge amazing workshop and how wise ur dad is truely inspired an i always fixed my car growing up with my dad you might not see this Mat but just want to say thanks for your vidoes bro they top class🔥

that was good timing !!

*Purchasing a stock may seem straightforward, but selecting the correct stock without a proven strategy can be exceedingly challenging. I've been working on expanding my $210K portfolio for a while, and my primary obstacle is the lack of clear entry and exit strategies. Any advice on this matter would be greatly appreciated*

10:23 , thank me later 👌

You guys are next level. My young son and I are both in awe at how you do all this stuff. It’s a cracking watch. Keep it coming!

Good to see Hannah getting on the tools!

Does anyone know the name of the song 2:50

When is Mat junior joining the team ❤

2:32 Did I see "Grandad" on that shirt 🧐

You guys are better than professionals... Passion beats talent for sure

I keep wondering how Matt and his team make crash damaged cars easy to rebuild. THIS IS HARDWORKKKKKK. 💯 🔥

Girlfriend is lucky to have you and you are lucky to have her. When are you gonna make a baby that rebuilds crashed RC cars?