Rebuilding Calipers and Hubs | Project 250R Part 26

Подписаться 240 тыс.

Просмотров 43 тыс.

50% 1

#250r #project #build
Rebuilding Calipers and Hubs | Project 250R Part 26
In this episode I walk you through the building process of the brake calipers on a 1987 Honda TRX250R.
We rebuild the pistons, install new pads and grommets and then install them on the bike!
Tools in this video...
Milwaukee M12 Fuel Kit - amzn.to/3b9GXvL
MXR6 Tires Rear - amzn.to/3eS8nsq
MXR6 Tires Front - amzn.to/379eciw
Front Brake Rebuild Kit - amzn.to/2UfgSpA
If you enjoyed, please comment, like, share and subscribe!
Thank you for watching!
Support the channel and up your swag with Mike Sabo merchandise! Visit www.teespring.com/stores/michael-sabo
Equipment I use!
Wireless Mic - amzn.to/2VeEATV
Tripod - amzn.to/2T4ZHW7
Tripod Phone Mount - amzn.to/37OzFfh
Phone Gimble - amzn.to/2vWDTnG
GoPro Hero 7 Black - amzn.to/2HQMMSp
Video Editing - amzn.to/39Ug66z
Thumbnail Editing - amzn.to/2HJuanv
My Favorite Energy Drinks... and they're cheap 😎
Reign Energy - amzn.to/2vXv5hk
Strikeforce Energy use Promo Code: SABO20
Companies and Sponsors please contact: michaelsabo350@gmail.com
Add me on Instagram @michaelsabo350
DBC Racing
Website: www.dbcracing.com
Instagram: @dbc_racing
I own the license to use any and all music in this video.
Other Music is as follows...
Track 1

Опубликовано:

29 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 252

@MichaelSabo 4 года назад

Thank you for watching my video! YOU ALL ROOOOOOCK!!! 🤘🤘🤘

@miguelbarreiros1818 4 года назад

Thank's for letting us watching it.👍🍻

@alexkroll8738 4 года назад

Mike, builds coming along sick! If you want to clean up that band clamp, I’ve seen people put shrink tubing around them on pre-runners where they go around the shock reservoirs. Might compliment the custom bracket and clean it up👍🏻

@MichaelSabo 4 года назад

That's a trick idea to clean it up for sure! Thank you bro!

@user-lx1zg2qo3c 4 года назад

No problem

@johnnyboy2201 4 года назад

Perfect timing. Uploaded as soon as I had to take a dump 😂. Can’t wait to see this thing ripping the track up

@TITYGERRR 4 года назад

I'm with you man. I'm struggling rn

@josephlangs8781 4 года назад

@@TITYGERRR You shittin too?

@TITYGERRR 4 года назад

@@josephlangs8781 you know I am

@threewheeledmachines4902 4 года назад

Same

@MichaelSabo 4 года назад

Hahaha, thank you for watching man!

@billmarty 4 года назад

Love watching project 250r gives me ideas for my 400ex

@MichaelSabo 4 года назад

Bill Marty Jr. thank you for watching! 🤘

@br1zzl395 4 года назад

Right I have bought parts just because sabos vids I love the no bull and I have gotten tons of ideas for my project yz blaster I’m building

@billmarty 4 года назад

@@br1zzl395 just got my 400ex a month ago and all I've bought is calipers and bars

@willybman3723 3 года назад

Why would u wanna build a 400

@billmarty 3 года назад

@@willybman3723 I'm not building its more of.. oh Ebay's got this for it lemme buy it

@lawrencestoner2678 2 года назад

The thing I like most about the wheels is the wide beefy tires! Looks ready to rip stuff up! Enjoyed watching this!

@MichaelSabo 2 года назад

I agree man! Those 18s being so short give them the extra wide appearance

@F5Tornado44 4 года назад

Dude, that quad is looking sick. Wish I could afford to do that to all 3 of my quads. If you haven't rid a quad with fully customized suspension to your weight and ability, you are in for a serious treat. You won't believe how easy it is to ride really fast and in control. Now the only party foul I see is no front beadlocks. That would make that quad look so much better. Not that it doesn't already look awesome, but front beadlocks would just accent those sweet wheels so much more and prevent you from rolling a bead off. Keep up the awesome work bro, and can't wait to see (and hear), the finished product.

@MichaelSabo 4 года назад

Thanks so much bro! I almost did get matching front beadlocks but I thought this was a trick look too; maybe down the road I will put them up front as well.

@breakwood8531 4 года назад

Your builds and how tp videos are the best. Can’t wait till you explode. Hang in there, in no time those 100k + views are coming.

@MichaelSabo 4 года назад

Thank you so much for the feedback man! I hope you're right!

@ononewheel7 4 года назад

So nice when it becomes a roller! Looking good man!

@MichaelSabo 4 года назад

Thank you bro 🤘

@ononewheel7 4 года назад

Michael Sabo anytime! I finally finished my new national build a couple weeks ago!

@jasonhendrie5411 4 года назад

Love the 250r beauty queen lol

@MichaelSabo 4 года назад

Thank you bro! 🤘

@perryjackson8089 2 года назад

Bad ass build, your videos have helped me tremendously on builds/ repairs on my400 ex, raptor 660/700, banshee and now 250r build . TBH I'd be lost without your help and attention to detail. Anyways- Keep up the good work. 👍

@cdsmith1990 4 года назад

One of the sickest custom quads I've seen though man, this build is coming along so well

@MichaelSabo 4 года назад

Thanks so much Chris!

@sharvisgainey1573 2 года назад

@@MichaelSabo my piston is stuck stuck it will not move I used 140 psi and I also let it soak in brake fluids! Thanks for any help

@MichaelSabo 2 года назад

@@sharvisgainey1573 thats not good man; I'd put PB blaster in the cylinder and try tapping on the piston with a block of wood and a hammer, as long as it not at bottom dead center it should eventually break free. It's probably going to need to be replaced anyways so if it's not breaking free I'd give it hell with the hammer lol

@streetrossi937 4 года назад

I can tell it's a small quad but it doesn't look bed I can't wait to see the finished product

@jsnow385 4 года назад

I love how in depth you go into your videos, keep up the good work. Its looking amazing.

@MichaelSabo 4 года назад

Thank you for the feedback Jesse Snow, I appreciated you watching my video!

@bigsexy1088 4 года назад

Looks like a beast

@jdkimbrough8579 4 года назад

Great video man! I’ve never rebuilt calipers before. Thought it was too hard. You made it look easy.

@MichaelSabo 4 года назад

Dude... there was quite a bit off camera; definitely not the easiest task; very time consuming.

@joeloyd56 2 года назад

I like your show, keep up good work.

@garrettnoble2615 4 года назад

Never disappointed with your videos bro and you make some dang good content.

@MichaelSabo 4 года назад

Thank you for watching and for the compliment bro 🤘

@rexg5807 4 года назад

So BAD ASS. It’s killing me waiting to see it done so I can only imagine how hard the wait was and is for you. Keep up the awesome work bro. And again great color scheme. Red lines will be sick

@MichaelSabo 4 года назад

Thanks so much Rex 🤘

@867diesel 4 года назад

when you put the clip through the nut on the spindle and axle . .. put a zip tie on the end of the pin so it will never back out and let you hub come off . most series have it in the rules for safety

@MichaelSabo 4 года назад

Always with the clutch tips brother... I was looking art those clips in the back thinking they might not be secure enough. Thank you.

@867diesel 4 года назад

@@MichaelSabo no it the main nuts on the hub that a clip or cotter pin goes through . oh and since you mentioned clutch . i run the magura hydraulic clutch i can work it with one finger . but i think it wont work with the asv lever you got . but after feeling a hydraulic clutch ill never go back lol

@refiii9499 3 года назад

I literally just did this three days ago lol. I was getting 125psi of air and those still weren’t budging lol. I wish I saw this video first ugh. I didn’t think about freeing the pistons by pushing them back in and getting them unstuck. I will now tho lol. These videos are great thanks for taking the time to make edit and show these skills and ways of doing all these components

@refiii9499 3 года назад

Ugh you didn’t show how you do the back caliper. That’s the caliper I’m having troubles with. And I wish you shown how you did the small o ring. Everything I’ve read says it’s a pita.

@250rtrxjunkie 4 года назад

Nice, I just used my regulator and kept going up until my pistons came out.👍🏻

@jaybirdls1 4 года назад

Loving the attention to detail here!!!! Totally making me push harder on my rebuild project too. I just wire wheeled all my factory dust caps for the suspension and painted them yesterday 🤣👍🏻

@MichaelSabo 4 года назад

Thank you for watching man; glad I could inspire you to do some work on your bike!

@Mac181 2 года назад

I like wat ya did in editing at 20:13 the way u zoom in then walk out hood shot man

@tristenkiesow4061 4 года назад

Just got done ride cr 125, perfect timing

@yaelpimentel12345 4 года назад

I think he forgot to mention he used blue locktite.

@danstevens2204 4 года назад

Top quality production, absolutely epic in attention to detail

@MichaelSabo 4 года назад

Thank you Dan Stevens!

@Matt-xx7hp 4 года назад

I was skeptical of the colors at first, but that thing looks mean. great job!

@MichaelSabo 4 года назад

Thank you for the feedback man!

@alexhoudek13 4 года назад

Looks absolutely killer

@grandpa-of-3898 4 года назад

Its getting there love the look and great video

@MichaelSabo 4 года назад

Thank you mickey asbill!

@johnthomas6614 4 года назад

Yea yea yea I LIKE IT & You R correct bout the sub frame not being VERY Strong until I bought a JP Fram back in the day. I learned how 2 weld cause of Big jumps & stock R Frames. I broke my share of them. The R is goin 2 be bad ass Bro. & 4 ANY OF THE HATERS GO BUILD UR OWN 250R UR WAY. WICK ON ✊ SABO

@RJMax-pd7tb 4 года назад

ive been waiting for a new video lmao, this quad is going to be so mint cant wait

@MichaelSabo 4 года назад

Thank you RJMax0305!

@kjohns236 4 года назад

I like to spray a little spray paint in a cup and use a brush to touch up things like that rear caliper ;)

@MichaelSabo 4 года назад

Great call man 🤘

@ligemurray3677 4 года назад

Goregous can’t wait to see that vapor blasted engine sitting on there great work 👍🏻

@MichaelSabo 4 года назад

Thank you Lige Murray!

@tb8841 4 года назад

Love the videos I just picked up a 88 250r with lone star frame and esr 330 motor I’m going to bring back to life

@MichaelSabo 4 года назад

Thank you bro! Sounds like a good find!

@Hollywood178 4 года назад

Looking good 👌👌👌

@dennisbagatin4480 4 года назад

Very detailed video awesome work she looks sick already 👍✌

@MichaelSabo 4 года назад

Thank you dennis bagatin!

@allanpinedo8059 4 года назад

Supper sick build bro I’m drooling Can’t wait to see it all finished amazing.

@MichaelSabo 4 года назад

Thank you Allan Pinedo!

@dieselpower24v 4 года назад

Hey Mike, when I did my 88, the Esr silencer mount is actually the rear brake resi mount as well

@MichaelSabo 4 года назад

Thank you for the info man. I am going to be using a billet hanger but It will be interesting to see if it could mount up to the silencer too.

@dieselpower24v 4 года назад

Michael Sabo it should, the esr Mount you showed in the parts pile showing the coe parts is the mount, I was running the trx11 pipe and center mount silencer on a short rod 350 though

@keithparady2594 4 года назад

Killer job

@MichaelSabo 4 года назад

Thank you Keith Parady!

@MnWarrior350 4 года назад

Dude the Build is looking soo Sick. Can't wait till the next vid. Keep up the Killer Content Man

@zfaithful_ 4 года назад

Nice 👍

@markpiraino5871 4 года назад

Wow Mike, its turning out really nice. I can't wait to see what your next build will be.

@MichaelSabo 4 года назад

Thank you Mark Piraino!

@Stergos69 4 года назад

It looks incredible , awesome job.

@MichaelSabo 4 года назад

Thank you Peter Stergos!

@johnpeiffer2670 4 года назад

I wish you were my best friend so you could help me tear down my 450er and do this. So many ideas right now. Can’t want to see the final product.

@itsrandall119 4 года назад

Looking SICK!

@doomdestructer-t5630 4 года назад

friggin lookin mint as hell mike!

@MichaelSabo 4 года назад

Thank you Doom Destructer-T5!

@theexisting1514 4 года назад

lookin cleannn

@Blue_offical_channel 4 года назад

That 250R is gonna be bad ass bro!

@borealmetalworx 4 года назад

I agree with a few other comments, you do good work. Also your production is top shelf. Keep it up

@MichaelSabo 4 года назад

This means a lot man; thank you for the feedback 🤘

@Blazerboy-se9jl 4 года назад

I’m 11 I ride a 250 R remember how you said they are small I am like 5 foot and it fits me perfect

@MichaelSabo 4 года назад

Yea man it's a tight quad for sure

@gavinbritt1349 4 года назад

@19:40 “I am twerking these bolts” 😂 I’m sure we’ve all accidentally said that

@aaronnealey488 4 года назад

I’m not even joking when I say this but I used a tire valve and a little 12v air pump from Walmart . As I started it wasn’t doing anything while trying I turned it over and Ka-plow right on the forehead . I was thankful it wasn’t a air compressor. I laughed pretty hard afterwards but had a small knot .

@MichaelSabo 4 года назад

Lmao!! Those pistons come out with force bro 😂

@partytime11 4 года назад

You should do a YFZ450 build next that would be a fun quad to build

@Greywolfwarrior 4 года назад

Sick quad love this build 🤙

@keithparady2594 4 года назад

She’s gonna b a wicked bike

@MichaelSabo 4 года назад

Thank you bro! 🤘

@ravioli9728 3 года назад

That's a cool blaster

@leopfeffer2419 4 года назад

Fabricate a two piece reservoir bracket that clamps around the frame rail. That hose clamp is just a shiny metal zip tie.

@MichaelSabo 4 года назад

Leo, I think you'd probably slap me in the face if you knew I actually had billet resevoir mount in a box right behind me and I completely forgot I had ordered it months ago... 😂

@leopfeffer2419 4 года назад

You gotta stop sniffing that lacquer thinner, son.

@867diesel 4 года назад

dude this thing is looking so sweet . the oem 250r front end will handle better than any other quad on the market . so dont worry about changing what got that legendary quad the status of best handling quad ever made lol . oh look up bvc trikes under the honda 2 stroke they have a rear brake rotor billet guard that i think you would like and they have the sprocket guards also

@MichaelSabo 4 года назад

Thank you man; the BVC ones look AMAZING. I am running DRW though; I will be putting them on after though because they cover some of the stuff I wanted to show in this video.

@867diesel 4 года назад

@@MichaelSabo sweet man cant wait to see the first ride . im going to be upgrading my brakes with 450 brakes . so ill be running the billet brake stay mount for that

@andrewjackson6986 4 года назад

Absolutely amazing build i love bike it is gonna be a ripper

@MichaelSabo 4 года назад

Thank you bro! 🤘

@nicholascaudill8868 4 года назад

Yep it's official... finally a roller! Im anxious to see all the steering gadgets setup. Got to make a separate video after it is all done on how it handles with all the gizmos! Great video Mike! Keep up the great work! BTW I have been sharing your videos, trying to spread your content. By far one of the best channels on RU-vid!

@MichaelSabo 4 года назад

Nick, thanks so much for the compliments and it means the world that you're sharing my videos; that helps me out big time!

@PovertyRacing18 4 года назад

Been dying for pt2!! Its gonna be sick

@MichaelSabo 4 года назад

lucasthedirtbikekid thank you for watching! 🤘

@PovertyRacing18 4 года назад

@@MichaelSabo I've been watching for idk how long man! Awesome video's!

@danstevens2204 4 года назад

Pretty sure the MS snug up will be plenty tight 👍

@br1zzl395 4 года назад

A fing mazing sabo I’m drooling love it 👍👍👍👍👌🏻👌🏻

@MichaelSabo 4 года назад

Thank you bro! 🤘

@motokulture4544 4 года назад

Love how she is coming together bro!!! 🤘

@landontannehill7858 4 года назад

Looks really nice Mike!

@MichaelSabo 4 года назад

Thank you bro! 🤘

@mikewiley1007 4 года назад

Another awesome video

@hondazonli7059 4 года назад

Love this content good job 👍

@SeacrocTL 4 года назад

This is about to be sick brother. Have you ever considered opening an ATV shop? I know you’re doing RU-vid full time but it’d be a great way for income as well as content. Even if it’s a simple fix for someone you can post it and help everyone.

@MichaelSabo 4 года назад

Thank you brother. I'd love to have my own shop; I'd probably need to open with a good business partner. It could happen in the future possibly.

@evaneyeball7953 4 года назад

Damn you uploaded this right as I got mine on it's own weight

@maxxisrazr2012 4 года назад

OMG it looksss SICK!!! I laughed so hard. Thanks for the content bro even through these tough times❤

@MichaelSabo 4 года назад

Hahahaha, I'm glad I'm not the only one who thinks that funny. Thank you for watching bro!

@TheTreepy 4 года назад

Looking sick bro‼️🔥🔥

@chadcaudill509 4 года назад

Top Notch Work my man!! I'm 4real OCD....So I dont give credit to easy...But your killing it! That R is going to be Dope AF!

@MichaelSabo 4 года назад

Thank you Chad Caudill!

@johncolosio6764 4 года назад

Looks good man. But you have to do something else with that break reservoir. Everything else is mint that would drive me crazy even if I can't see it under the plastic .

@DUNEATV 4 года назад

My god you do nice work! Loving the vids!

@MichaelSabo 4 года назад

As always, thank you DUNE YXZ!

@DUNEATV 4 года назад

Michael Sabo No, thank you sir...”deep intro voice”

@MichaelSabo 4 года назад

@@DUNEATV lol 😆

@downtoearthconstruction7768 4 года назад

Go to Lowe's and get some stainless steel zip ties for that reservoir it will have a more oem look they're about 8 bucks for 6.

@marshallnaville1079 4 года назад

What going on with the yz project? That 250r is sick!

@MichaelSabo 4 года назад

Thank you bro; on hold at them moment while I do 250R stuff but the YZ is happening!

@AR.1500.R 4 года назад

Bad Ass Already And Is Not Even Finish..⭐⭐⭐⭐⭐Nice

@MichaelSabo 4 года назад

Thank you bro! 🤘

@devyduck 4 года назад

love vid dude

@MichaelSabo 4 года назад

Thank you Jamie McDonald!

@jok3yjesu339 4 года назад

Love how yall didn't put any grease in the hubs at all except on the seal, I would have packed that bearing with grease then pressed it in

@samnice5314 4 года назад

Little bit of blue loctite..... love the build man lol

@joenewberry5912 4 года назад

Quad looks awesome. Should look into a cannondale project quad. Really test your skills lol

@MichaelSabo 4 года назад

Thank you Joe; a few people want to see this; I know theyre a totally different animal.

@joenewberry5912 4 года назад

@@MichaelSabo if you need any info on them just hit me up. And next time you are up my way you will have to ride mine

@Quadcrazy84 4 года назад

I believe ESR makes a reservoir clamp mount for the airbox delete. Either I'd still run it.

@MichaelSabo 4 года назад

Dude... I actualy have one; it came with my motor parts and I forgot about it... lmao

@ATCREVOLUTION 4 года назад

Great to see the 250r project moving forward again! Can’t wait to see the rest come together and some riding footage in the PA coal hills! All the coal hills I grew up riding on where I live in PA are gone. All the land got reclaimed and posted sadly. I’d love to know more about the area you ride at. Keep up the good work!

@azzionsmith7187 4 года назад

What works too is using the bleeder hole. Instead of the banjo hole

@Pinnaclewindowcleaning 4 года назад

Like what I see

@Shornandkenny 4 года назад

Great build. Ya dont need all that grease all over the calipers sand and shit will stick to it all.

@stevetremblay9323 4 года назад

very nice video .why you put dielectric greesse on the hub why you dont use normal bearing greese?

@MichaelSabo 4 года назад

On the outside of the seals? You can use either really; I am just used to the dielectric on seals.

@br1zzl395 4 года назад

Hey sabo was wondering if you had any other media platforms like Facebook or Twitter I only ask because I feel your channel is to small for the quality of content you put out your channel is very informative and you interact with your viewers and that’s rare on RU-vid I know for a fact that it f more people knew about you and your channel you would have like double your subconscious and views just some food for thought

@MichaelSabo 4 года назад

Thanks so much man; I do have and instagram which I post on regularly @michaelsabo350 and I have a facebook for the page as well but I am not very active on it.

@chrisleist7973 4 года назад

Hope you know you need special brake disc for kevlar brake pads because you put them in the rear

@Ahw4113 4 года назад

Attempting to build my own 250r now. Where did you get that three way brake line adapter in the front from? I need to relocate mine to fit the exhaust in.

@MichaelSabo 4 года назад

Good luck with your build man! That brake union came with the streamline front brake lines.

@zacharymccarthy7931 4 года назад

Dude I've been waiting

@MichaelSabo 4 года назад

Thank you chaos_Mxrcy!

@firegaming8176 Год назад

I’m rebuilding my 250r also

@Mnnti. 4 года назад

if you ever do another build like this do a Kfx450r or another 450

@MichaelSabo 4 года назад

A 450 quad is inevitable.. lol; I've never even sat on a KFX450R so it would be cool to do one.

@Mnnti. 4 года назад

Michael Sabo they have reverse😉😉

@zackcalfee4844 4 года назад

Man id love to have this dudes life, money, time, lol everything...smh at least someone is living the life. #goals #justaquadthatruns lol

@MichaelSabo 4 года назад

Perception is reality.

@evanmoyta1422 4 года назад

Hi. I have a 86 trx250r. Looking to put a big bore kit on? What do you recommend and what brand. Wanted to do like a 310-330.. Thanks for your time and all the videos.

@MichaelSabo 4 года назад

It's going to depend on what type of riding you do and your budget. ESR has affordable options that can be great. Other great companies that can set you up are LED Performance, DBC Racing or FTZ Racing. Best bet is to call them and they will give you great direction for your build 🤘

@evanmoyta1422 4 года назад

Ok. Thank you much. Keep up the awesome work and videos.

@gavincardwell2223 4 года назад

Hey man I love your channel but I'm just giving you advice but when I'm messing with liquids I wear gloves because it protects your hands and plus your hands are clean under the glove witch makes for no clean up 😏 just some advice

@quentinstore1464 4 года назад

Hey wondering if you know where to get a complete hardware kit for the 450r plastics??

@MichaelSabo 4 года назад

I know DBC Racing sells a stainless kit for the 450R but it includes every bolt on the quad. If you just need the fender bolts, I'd have a look on ebay.

@quentinstore1464 4 года назад

Michael Sabo yeah I looked online and eBay no specific kit for plastics, I’ll try the kit you recommend...thanks

@user-lx1zg2qo3c 4 года назад

Yes👏🏼👏🏼👏🏼👏🏼⛽😁

@250rtrxjunkie 4 года назад

Get a ESR brake Reservoir holder.

@MichaelSabo 4 года назад

Thank you for the DMs bro 🤘

@250rtrxjunkie 4 года назад

@@MichaelSabo 👍🏻