Rebuilding my Carb...will it fix my 1979 Toyota Corolla TE31? 

Same problem with my 84 Corolla coupe. Sat for too long. It was working fine but had a power steering leak and I let it sit for too long since I had my pickup to use at the time. When I tried to start it one day had same issue. I replaced fuel pump. (The one it had worked but was from a 4 door) they are different. Checked fuel lines. Dropped and cleaned tank. Nothing. I figured the end of the line was the carb. But I know nothing about carbs. I heard something about a floater drying out in carb... But I see you brought it back to life. I'm gonna use that link for O'Reilly. Thank for the tip. And congrats. You just forgot to say "IT'S ALIVE!!!"""😂✌️ PS sweet ride. I had an 83 pickup before. Got stolen 😣. Love old Toyota though. I would like to own a 70s pickup or Stout or Corona. Great job! Subscribed. ✌️

When you install a carburetor on a car, its a smart idea to manually fill the fuel bowl with fuel before you start cranking the engine. That way, there's already fuel inside the carburetor, and when you first go to start it, it should start within a few seconds. That way, you don't need to crank the engine for a while to get the mechanical fuel pump pumping fuel all the way from the fuel tank, all the way to the carburetor.

The tiniest tiniest issue caused the biggest problem. Glad you got her going!!! You're just like me, I have a ton of old 70s and 80s Toyotas, trying to get them all rolling

Nice car ✌🏻 I have to deal with the same problem , but now mine is running after a few years I'm so happy . Thanks for all your tips man !!!!!

1973 Corolla - used gasoline with no ethanol to solve the vapor lock issue. Place in El Monte, CA “Carburetor Exchange” can fix, diagnose issues with old carburetors. Temporarily used a transparent plastic hose from the fuel pump to the carburetor to see if fuel is reaching the carburetor. Replaced the contact points in the distributor with electronic ignition.

Hi, I have a 76 Celica (TA23) with the same engine and faults ( also a home mechanic). I changed the mech fuel pump but still no joy :( . It was harder for me to remove it because my hood flips on the front side, lol. Looks like i have to rebuild my carb too, need to ask if you have the reference/ part number/ carb model number for the carb rebuild kit? Need to source it for a similar rebuild. Thanks for the links and a great walk-through on the rebuild, looking forward to more vids on your Corolla.

Nice car

i’m sorry what were your symptoms of a bad carb? i just bought a 1977 corolla with a 2TC and it idles very rough and gets horrible gas mileage and very slow speed. Would this lead to being the carb? if so i’d rather get a weber than rebuild the stock carb. i heard they’re over complicated garbage

هل يوجد قطع غيار لها واين اتحصل عليه وشكرا جزيلا

Hello. Nice video! Can you send link for the gasket set? Thanks!

I have similar issue with my 76 celica, same engine but dual carbs, cleaned them both out but now it doesnt run good, needs some fine tuning or calibration but hard to find info on that lol. So if someone knows where to find please let me know!

I have same ke30 with original engine but sadly after last carbeurator tuning it does not start without puling choke.

1980 Toyota Corolla 1.8 stalls when I come to a stop. Any suggestions?

Does any of you k ow the settings of the adjustment screws for a 3tc/2tc carburator purchased a rebuilt carburator for my car and it doesn't run good, I changed fuel tank ,lines ,fuel filter,fuel pump, spark plugs, spark plug wires ,dist cap and rotor and new exhaust and pipe car still won't idle and accelerate properly so need to know the settings case the 3 1/2 turns on the one in back and 21/× on one in the front is not getting it done looking at carb there are four little adjstment screws from bavknof engine to front. Any help greatly appreciated

The bowl where the float goes?