Redline Racing 521 banshee first rip. 

It amazes me how many comment era cant tell the difference between clutch slip and wheel spin

thoes poor front tires

Lockup clutch and 10mm cub makes what. stock .100plus hp. And then a wet road Has no chance of traction in any gear

Would love to see a video when you actually go over 35 mph.

Good to see another Redline build on RU-vid! Cameron is a true master

Living the dream I see you have an fd and a banshee 🙏🏻🙏🏻🙏🏻

That throttle response is unreal!

I ran 117 octane racing gas with 4 oz of Yamalube 2R oil per gallon. There is no warmup with that mix. It was ready to be on the pipe 1st kick. I ran it for 5 years on that mix with a stock bottom end and a few bolt ons. Toomey T5s, 35 mm carb kit, drop 1 tooth on the front sprocket. I loved that thing but I needed a $7k HVAC system for my new home. The guy said he would trade even for the unit I needed so I let it go. He ended up plowing it into a tree a few weeks afterward.

The reason the gearing is kicking in so fast is because he has straight cut gears he's not even using the clutch. The bike really has a drag motor tbh but I don't blame him for wanting to just ride it also. If he was just running it through the 1/8 it would do exactly what he built it for. Tires are probably spinning also because it's wet and that bike has a lot of power to the back wheel.

I love coming back to this vid and reading the new debates about the clutch, I think it’s traction Bc if it was clutch than why is he counter steering in the first pull?

That's sick! I though my old 472 banshee was nasty. That's gotta be a trip to ride. Nice job man

No wheelies, no jumps, no dirt, 80 plus hp between your legs. Push it in that bonfire you passed and send it with an xr80...

Yamaha Banshee moves great video man keep it up.👍🔧⛽

I love the first start ups!! Especially when the quad is already warmed up somehow!!!

is it just burning the back tires down when u nail it bro ??

is this in Albany Oregon?

Nice video that thing is insane

What's up with the tires? Should do holeshots all around

What did u rip? Your pants off? An by the looks of things a can am 1000 would be better for that area

sounds like your clutch is spinning

Dude I could practically smell that clutch just watching this madness.

Just blowing the tires off! That would be fun in the sand with paddles. Sounds killer!

What did you do spend all your money on the motor and can't afford proper/good tired?

sounds like the clutch is slipping or is that the rear wheels not catching traction and slipping? Or gearing ? But try clutch that can take that all that power and try different size sprockets.

I love banshees they look and sound so cool

change the sprocket gearing is to low. power band kicks to soon at low speed. i dont think its the clutch slipping its new. its the gearing.

How did it do in the dunes? It appears to come on the Band fast-by the sound

Sounds like a damn snowmobile

Warming up or afraid of powerband?

Videos never do justice... I hate it. Love the stance if it and the sound.

Is that stock thumb throttle actually opening up 39’s all the way?

I'm building a slightly smaller 496cc RZ engine, going into an RZ250 frame. From this video I think I shall be pleased. Top work Cj Brault.

He did rip into it. Do you peeps not see how wet the road is? The wheels instantly spun when he hit the powerband

lol, those bars make it look like the S. S. Minnow from Gilligan's Island.

Do yall not read the description? 125hp at the wheel. Thing has no chance of having any traction on a wet road.

u olny got one gear buddy!

is it as fast as it sounds and looks?

Why she shifting like that ?

Banshee is street legal where I'm at. If not for dragracing.....what length swingarm is recommended 0 to +6? It's all street, beach, desert and high speed MX. Geez, seems you can't use all that power on the street. Will the Kenda Speed Racers help?

Sand tires, big flooded fields, all the back roads and over pass, you are definitely in the willamette valley huh tons of backroads out here to drive on just got hope you don’t catch a cop on me one I live down the street from a gravel road take my 85 250r down there all time time there’s a cop that lives down there that doesn’t seem too bothered by my rides from time to time he even gives me a wave some times when I pass by great guy wish there was more out there like him

Hey man nice build, would you mind sharing roughly how much did you pay to have your engine build? Im hopping to build my a 521 too

Dang ya got it up to about 30mph be careful don't wanna be fallin off now.

what is the top speed ?

Wouldnt it be drifting more if it was wheelspin? I have always wanted a banshee :)

nice quad love banchees wouldn't be on the road with that front tires and it sounds like your cluch is slipping

are you using the clutch to change gears or race riding it

Post an updated video of the thing my god that clutch sounds poopy 😭

How can I make my 03 banshee sound like that and still keep it stock?.

I wish I still had my rz350's had both the black and yellow and the white and red tommey pipes reeds! I wish this engine was around back then.....from Wyoming USA 🔫🤠

was she slippin the clutch? ? sounded a bit like it.

All these people wanna say the clutch is slipping. But if you pay attention, you can see the front of the ATV is actually raising up. You sir have a badass quad.

Sand tires on asphalt really?

I believe he is spinning the tires because the bike has so much power

Nice cub but I don't think those sand tires are gonna corner well on the street!

What a beautiful sound 👍🏻👍🏻👍🏻. But your scared to death of it

Sounds like the clutch slipping

You need to practice shifting&Using your throttle correct with that 2stroke its nice but something isn't right its more than traction issue

Those dune front tires are sketchy looking on the pavement

Dang that rx7 in the background tho

do you weigh 80 lbs lol traction issues.

Don't be scared....might as well but a yz 80 if your gonna ride like that...its cheaper

Is that the clutch slipping or the tires spinning?

was also waiting for him to go faster. Did he even get out of 4th gear? Redline does amazing work, so it's hard to believe he was slipping the clutch. Sounds like he was trying to speed shift but couldn't figure it out as an inexperienced rider. should always pull the clutch level anyway, just as a safe gaurd. Unless you're daddy Warbucks and can afford to burn up clutches.

125 hp?? Holy balls!

Did you have it on the dyno? If not how much power do you think it makes?

Sounds crispy to me just power spinning up back wheels. Prefer if someone was following you with the camera

After 1 down the rest are up.

you can litterally hear the tires spinning if you listen closely at some parts lol

Clutch needed ajusting the lock outs are touchy but didn't stop an bother so now it needs new one

What kind of kit is in the engine?

What cc domes are your running? What's the lenght of your swing arm? Subscribed

Justin sandwig those arent sand tires on the front. They are regular dirt tires. Hes not hurting them at all.

Can someone send me the link to the redline racing 521cc..... I can only find the cylinder kit

Y is there Sand tires in the front

Bro you have a very interesting garage.

Well I think I am going to press that magical subscribe button after watching you ride this beast!

How much was your banshhe

Not enough smoke coming from the exhaust, need a better oil/fuel ratio

ive had banshees. its the power band.

Nice vid man what would you say the top speed is

Frying that clutch.

He has wheel spin in every gear, it isn't the clutch. Clutch slip doesn't make it kick out sideways as seen in the video. At one point he was easily going over 60mph and still spinning the tires and the rear want to come around. This is a sand drag set up with paddle tires. On wet pavement he might as well be on ice.

i love it

I believe the video description

So its a road bike I assume and you don't want to get it dirty? I would just put the motor in a street legal bike like an old TW 200 and ride it on the roads.

It sort of looked like fun...

Nice quad that powerband duration is insane

Sounds like massive loss of traction lol👍😁

You get em tiger

New clutch I think

This vid was uploaded in May so I'm sure by now you took care of that clutch issue. Whether it be Friction Plates or a simple loosening up of the adjuster on the Perch. (and No that's NOT the Tires Spinnin lol)

You need slicks on pavement. Lol that's a badass 4 wheeler. I want to put 421 on a new 450 yz chassis

I would say a little under rear tired

Deviousounds no hate here man.. just trying to help him out.. i have built a few and know how it should sound.. clutch is deff slipping bad.. but thats an easy enough fix.. I want to see the next video where it isnt slipping.. if it is actually what he says it is.. this thing would be friggen awesome!!

I feel sorry for that banshee

bro wot kind of car is that car in your garage it kinda looks like an rx7

those are sand tires in the front...

Those front tires are for the sand dunes lol

i have had many banshees, the latest wasnt that big it was a little over 4, but i know enough so that the one in this video isnt even close to full potential.. either you are blowing the tires off from that thing, or, what i think is you are slipping in the clutch horribly.. not a terribly bad thing.. just need some better discs and plates is all.. something that can handle all that power.. on every one i built, that was my biggest issue.. getting the new power to the ground.. when i actually found a combination that could handle it it was awesome!! but by the looks of this bike it should pull harder that what it is doing.. mine when putting piwer down would almost launch out from under me.. (im a smaller guy) but i still think the clutch is slipping....

you need a 18 in the front and a 30 in the back