Step by Step Procedure to Refine Silver using Salt and Nails from Silver Old Jewelry and testing in karat meter Machine
*This work is done by a professional so do not try this at home*
This Refining process is performed by PC GOLD
*Channel Link - www.youtube.co....
In this video, I am going to show you the full process of silver refining using salt and irons nails and iron round sheet. It takes 2-3 hours to complete the whole process for silver refining. The same technique can be used to extract the silver used in the gold refining process. The silver will start forming when we add water-salt solution to the reaction output (silver nitride). KARAT METER Testing Machine is used to test the purity of gold and silver
Procedure to Refine Silver
1. Melt silver alloy into small pieces
2. Put the small alloy pieces into a steel container
3. Use Nitric Acid to start the reaction between alloy and the acid
4. Supply nitric acid to the steel container continuously until the alloy gets dissolved into acid
5. When the reaction starts it produces red smoke so wait till it produces white smoke
6. White smoke represents the end of the chemical reaction
7. Add water-salt solution to the by-product produced in the chemical reaction and as soon as we add the solution it will start forming silver powder
8. Add Iron Nails and Iron Sheet and stir them till the silver powder will be converted into metal sand
9. Dry the silver metal sand and melt them into a crucible
10. 99.99% Silver has been Recovered
11. Check the Silver Purity in Metal Testing Machine (Karat Meter)
----------------------------------------------------------
Please do Like, Share and Subscribe
----------------------------------------------------------
Join me on:
Facebook: / pc-gold-1461. .
Instagram: / pravin_chau. .
My tools
1 Camera: amzn.to/2Zvnh2g
2 Tripod: amzn.to/2RmeDii
3 file Sets: amzn.to/3iubed2 amzn.to/3hnX4c3
4 Hammer: amzn.to/3kdwODf
5 Brass Brush: amzn.to/3irTXBq
6 Motor Polish Machine: amzn.to/3it7o3R
7 tweezers: amzn.to/3mg0u4o
8 Wire Drawing dies: amzn.to/3kaggfi amzn.to/2FpdNip
9 Ring Mandrel: amzn.to/3bVG0Jj amzn.to/2Zy3mQs
10 Saw with blades: amzn.to/3bS1EhI
11 Ring Clamp: amzn.to/2GPQm20
12 Metal cutter scissors: amzn.to/3mggq6I amzn.to/3hoswqJ amzn.to/3htjLM9
13 Plier: amzn.to/3hmH36d
14 Plaster: amzn.to/2GTooT3
15 Micro Motor 102l Polishing Handpiece: amzn.to/3kdfKNz
16 Vernier Caliper: amzn.to/32pKtRn
17 Rolling Mill Machine: amzn.to/32pNJfz amzn.to/3mhNfjL
18 LPG Soldering Gun: amzn.to/2FyGsRE
19 Soldering Heat-Resistant Work Surface: amzn.to/2Zw4IuQ
20 Magnetic Polishing: amzn.to/3igX7qK
21 Plasticine Clay/Kala Mom: amzn.to/3ifL8cU
22 My Phone: amzn.to/3BroKIk
Thank You for Watching this Video
Your Jeweler - PC GOLD
Facebook: / pc-gold-1461. .
Instagram: / pravin_chau. .
Thanks for watching
#pcgold
#goldrefining
#goldrefiningprocessbyprofessionalgoldsmith
8 сен 2024