Тёмный
No video :(

REFINSHING a FAUCET with SPRAY PAINT 

Lets TRY this.
Подписаться 2 тыс.
Просмотров 141 тыс.
50% 1

How to refinish a chrome faucet and spray paint it black
Below are the items I used for this project. Any automotive primer and enamel will work. If you choose to spray your faucet indoors make sure there is enough ventilation as the fumes are very strong while painting.
Any Automotive Primer - www.amazon.com...
Black Spray paint - www.amazon.com...
Clear Enamel Spray - www.amazon.com...
*** Disclaimer *** The links above are affiliate links in which I may make a small commission from. DIY Chrome Faucet Spray Paint Refinish

Опубликовано:

 

21 окт 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 89   
@1966johnnywayne
@1966johnnywayne 2 года назад
Try steel wool in place of the sandpaper...it will follow the contours much better. And make sure to clean with iso alcohol before painting.
@lurklingX
@lurklingX Год назад
i like the cardboard & pegs idea for the spray painting.
@moderngreyfarmhouse
@moderngreyfarmhouse Год назад
Thanks!
@Icant88
@Icant88 2 года назад
My contractor installed a chrome showerhead and I really want a matte black one. It would be too much money to remove and install a new one. I've seen many different youtube videos but yours is the one I will do because of the detailed steps you both took. When I do redo mine.... I'll use the steps. the process to ensure you get credit. Thank you.
@Noname-ul9fx
@Noname-ul9fx 2 года назад
What matte black will you use?
@Icant88
@Icant88 2 года назад
@@Noname-ul9fx Rust-Oleum Brand Universal Advanced Flat or Painter's Touch 2X
@noname-mv9xr
@noname-mv9xr Месяц назад
Noname
@Queencreekmom70
@Queencreekmom70 3 года назад
Love the finish, looks fantastic! Great job 👍🏻
@missvaleria1722
@missvaleria1722 Год назад
Thank you for this video so hard to find step by step videos of changing chrome color .. currently I want to change my fixture sconces plate from chrome to a white. Now feel more confident to do it.❤
@moderngreyfarmhouse
@moderngreyfarmhouse Год назад
You’re most welcome.
@franklinshriver8441
@franklinshriver8441 2 года назад
Would definitely put down a sheet of plastic under all that. Overspray will land about 2-3 feet on the floor around painting area.
@AtlantisIndigo
@AtlantisIndigo 4 месяца назад
The grass?
@CEINOLHomeDecor
@CEINOLHomeDecor 3 месяца назад
If you looking for a reliable waterfall faucet. CEINOL will be a good choice.
@vidoolahvanderhoeven3883
@vidoolahvanderhoeven3883 2 года назад
Looks fantastic...how long does it last?
@mikestein8325
@mikestein8325 2 года назад
You did it right. Good details
@moderngreyfarmhouse
@moderngreyfarmhouse 2 года назад
Thank you
@frankv.2681
@frankv.2681 2 года назад
I noticed it's been over a year since you posted this excellent video and I have to ask ... how is the new black finish holding up? Any chipping off?
@moderngreyfarmhouse
@moderngreyfarmhouse 2 года назад
Its holding up nicely. I did an update video, here is the link to it ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-v6sSMPU5w4k.html
@frankv.2681
@frankv.2681 2 года назад
You rock ... thanks for the fast reply!
@marychristineanderson4112
@marychristineanderson4112 Год назад
Nice!!
@outsideinstudio
@outsideinstudio 6 месяцев назад
Thanks for sharing this! Quick question: I completely botched the black finish while handling the handles while not fully dry. Would I need to re-sand down to the metal or would you recommend a lighter-grit sandpaper to smooth out the finish and start from the primer phase?
@taistorezan7419
@taistorezan7419 Месяц назад
How long did it last?
@maxi-me
@maxi-me Год назад
Cool! Fixing to try this, thanx for sharing! BTW: how'd that color work out for the patio bricks 😆
@DavidSmith-fr1uz
@DavidSmith-fr1uz Год назад
I alluded to this same thing.
@maxi-me
@maxi-me Год назад
@David Smith never got a response, I'm guessing he'd already heard the same question from wifey; in rhetorical and violent tone lol
@ak6ill
@ak6ill 2 года назад
Hey, how long did you need to wait for the clear enamel to finish curing?
@moderngreyfarmhouse
@moderngreyfarmhouse 2 года назад
About 24 hours
@hameedahudda6338
@hameedahudda6338 3 года назад
Hi I am really finding it hard to find a style in black that I like so contemplating this How's it holding up since it's a faucet I don't want to risk it Can you please do a quick follow up video?
@moderngreyfarmhouse
@moderngreyfarmhouse 3 года назад
Yes I can do that. I will try to post a follow up video within the next week, I will reply to you here once it is up.
@moderngreyfarmhouse
@moderngreyfarmhouse 3 года назад
I just posted an update video for the faucet. Here is the link ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-v6sSMPU5w4k.html
@tlanc1283
@tlanc1283 3 года назад
how is the finish holding up?!!
@moderngreyfarmhouse
@moderngreyfarmhouse 3 года назад
So far there are no chips and no peeling. The automotive finishes are the key to the durability
@audiophileman7047
@audiophileman7047 Год назад
This is a very good video! 👍👍👍 Will this work for a drain in a shower? I'm just wondering if this would hold up from continuous water contact. I'd appreciate your advice on this point. Thanks!
@moderngreyfarmhouse
@moderngreyfarmhouse Год назад
I think it would hold up to water contact but may have issues with hard scrubbing while cleaning.
@audiophileman7047
@audiophileman7047 Год назад
@@moderngreyfarmhouse Thanks for your reply. I may have to bite the bullet and just replace it, but it's surrounded by tile, so it won't be that easy. Don't want to break the tile to get it out. I'll have to put my thinking cap on for that job and see what others recommend. 🤔
@moderngreyfarmhouse
@moderngreyfarmhouse Год назад
@@audiophileman7047 you could try it and see how it goes. If it stars to peel off then it may not be hard to remove completely. My best advice for its staying power is to be sure use the automobile primer then paint then sealer.
@audiophileman7047
@audiophileman7047 Год назад
@@moderngreyfarmhouse Thanks for the further information. 👍👍👍
@pierreverdoni
@pierreverdoni Год назад
LOL you started sanding and painting at noon !!!! and finished a midnight!! NEXT time put your pieces closer so you have to empty 2 cans to paint 4 pieces
@moderngreyfarmhouse
@moderngreyfarmhouse Год назад
This is how we DIY. We start late, take forever, complain most of the time and end up happy in the end.
@tambrawood3355
@tambrawood3355 3 года назад
Thank you for the video. Looks nice!! How is it holding up? Also, did you just do one coat of the clear enamel?
@moderngreyfarmhouse
@moderngreyfarmhouse 3 года назад
Its holding up well in our guest bath. We did 3 coats of clear enamel.
@Atzadeh83
@Atzadeh83 2 года назад
@@moderngreyfarmhouse can you do a post video to show us how it looks now?
@moderngreyfarmhouse
@moderngreyfarmhouse 2 года назад
@@Atzadeh83 I have a video update here Spray Painted Faucet Durability Update - 8 Months
@moderngreyfarmhouse
@moderngreyfarmhouse 2 года назад
@@Atzadeh83 m.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-v6sSMPU5w4k.html
@THETRAVELLINGDONKEYS
@THETRAVELLINGDONKEYS Год назад
how is it 2 years later?
@moderngreyfarmhouse
@moderngreyfarmhouse Год назад
Its still holding up well in our guest bathroom
@naomib5220
@naomib5220 Год назад
I’m interested to know how this is holding up 2 years later. Have you had to do any touch ups?
@moderngreyfarmhouse
@moderngreyfarmhouse Год назад
This is in a guest bathroom and is holding up well. I did an update video here. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-v6sSMPU5w4k.html Since this update the only areas that could use touching up is right round the faucet screen that cant be seen, I scrubbed very hard here trying to remove hard water.
@Quasartone
@Quasartone 2 года назад
Ho durable is that finish ?
@moderngreyfarmhouse
@moderngreyfarmhouse 2 года назад
SO far it has held up well in a guest bathroom. The automotive primer and sealer is are key steps that shouldnt be skipped.
@Al-hv4rb
@Al-hv4rb 2 года назад
Do you need to primer to fully cure before the black?
@moderngreyfarmhouse
@moderngreyfarmhouse 2 года назад
We sprayed the black about 2 hours later. It was in October in the desert so it wasn’t too hot, too humid or too cold and 2 hours was enough for it to fully dry
@dylanjelen1346
@dylanjelen1346 3 года назад
Assuming you didn’t have to keep your main water supply off for the entirety of the process?
@moderngreyfarmhouse
@moderngreyfarmhouse 3 года назад
No, we have a valve under the sink that can shut off the water to that faucet only
@ForeverKP
@ForeverKP 3 года назад
do you NEED to wait 48 hours between the black paint and the protective top coat?
@moderngreyfarmhouse
@moderngreyfarmhouse 3 года назад
It just needs to be fully cured. Spray paints will vary, the can should say cure times on them. We could have done ours the next day.
@charyldealva5826
@charyldealva5826 2 года назад
Did this method hold up to water and soap?
@moderngreyfarmhouse
@moderngreyfarmhouse 2 года назад
I did an 8 month update video. Here is the link ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-v6sSMPU5w4k.html Its still currently in the same condition as it was 8 months ago.
@sollopez7251
@sollopez7251 2 года назад
You said this was placed in a guest bathroom so I think there is no much use of it as in a master bathroom. Do you think this would last well in a bathroom that is more frequently used than a guest bathroom?
@moderngreyfarmhouse
@moderngreyfarmhouse 2 года назад
Ive seen others use it in heavier traffic bathrooms and it has worked out. Be sure not to skip the primer as its very important. Personally I wouldn't spray an expensive faucet you aren't willing to let go of in the event it doesnt work out.
@johngalt156
@johngalt156 2 года назад
Used rustoleum auto primer, black matte and it put a fuzzy, textured coating????
@moderngreyfarmhouse
@moderngreyfarmhouse 2 года назад
That is strange. Ours is smooth. Unsure if weather plays a part but ours was done in weather that was around 75 degrees with minimal humidity. It’s possible you can sand and reapply. If you do that is get new cans in case 1 of the 2 cans were defective.
@SeanKirkFlanagan
@SeanKirkFlanagan 2 года назад
Have they held up over a year?
@moderngreyfarmhouse
@moderngreyfarmhouse 2 года назад
I have an 8 month update video here Spray Painted Faucet Durability Update - 8 Months ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-v6sSMPU5w4k.html they are in the same condition now as in this video.
@gmangman2098
@gmangman2098 3 года назад
Can you do this with same primer and clear enamel but use a Rustoleum Metallic spray paint? Specifically the oil rubbed bronze color.
@moderngreyfarmhouse
@moderngreyfarmhouse 3 года назад
I don’t think that would be a problem
@gmangman2098
@gmangman2098 3 года назад
@@moderngreyfarmhouse I'm pretty sure I did something wrong then. I did the sanding, the auto primer, the paint. Waited 72 hours. Then hit with the enamel and it bubbled and peeled. Thoughts on what I did wrong?
@moderngreyfarmhouse
@moderngreyfarmhouse 3 года назад
@@gmangman2098 hmm Im not sure what could have happened. Maybe the climate? We did this when the weather was in the 70-80's dry climate.
@1966johnnywayne
@1966johnnywayne 2 года назад
@@gmangman2098 Use iso alcohol to clean the surface before painting.
@joe7528
@joe7528 Год назад
Just wait till you or a plumber has to do work on the faucet that is if you can break the paint from the threads to unscrew the parts to access the valves and not to mention doing any repairs will damage that paint job you did so all that time , energy, money, is going to be wasted
@moderngreyfarmhouse
@moderngreyfarmhouse Год назад
At that point since Im paying a plumber I would just get a new faucet and have him install it. Its now Oct 2022, 2 years later and I feel I have gotten my time and moneys worth.
@joe7528
@joe7528 Год назад
@@moderngreyfarmhouse your time and money not mine but it was a good idea as DiY project just wasn't fully well thought out if would've took the time to take apart the handles and the base painted them individually then you would be able to gain access to the valves if need repair or replacement as far as hiring a plumber it's going to be costly MOST plumbers charge 2 hr minimum + travel time before they even set foot on any property then the repair time and parts are added TRUST me it get's costly fast i did plumbing for 10 yrs however they make repair kits that can be found at any home repair stores or hardware stores and it's much cheaper than hiring a plumber also you can go on the manufacturer's websites and I'm sure they would have the color that you tried to do in your DIY project most of the manufacturer's have a assortment of colors and styles
@msjoy2005
@msjoy2005 Год назад
I did this with doorknobs.
@moderngreyfarmhouse
@moderngreyfarmhouse Год назад
Nice! Great idea
@saveamerica2896
@saveamerica2896 Год назад
I would have just bought brand new black matte faucet instead of doing all that work. ❤😅😊
@moderngreyfarmhouse
@moderngreyfarmhouse Год назад
In the video I explain that we had bought one and switched it out but it didn’t fit correctly. I could’ve bought the same brand and it would’ve worked but those ones at the time were pretty pricey.
@saveamerica2896
@saveamerica2896 Год назад
@@moderngreyfarmhouse oh gotcha. Im sorry. I fast forwarded most videos . We have an old house and had the same issue with the plumbing not fitting a brand new vanity. So my husband had to cut the back of vanity open.. also I will never buy from lowes again. Everything we buy never lasts long at all. So now we have to paint bathroom fixtures that isnt even 5 months old. I'll most likely have to do it on my own. Wish me luck
@lurklingX
@lurklingX Год назад
this seems like soooooooooooooo many steps and coats. like surely there is an easier way..... (not that there is, i'm just sayin. 9 separate coats? probably worth it to just grab new faucets at that point. that's a LOT of time, plus spray paint money...)
@moderngreyfarmhouse
@moderngreyfarmhouse Год назад
It looks a lot harder than it actually was. We had tried a new faucet and it didn’t fit properly so we went this direction instead of trying another new one.
@lurklingX
@lurklingX Год назад
@@moderngreyfarmhouse maybe not 'hard' per se. just the time and steps involved. still might try it but with some kind of cheat code if i see a consolidated method lol. i think my mind will explode over all the repetition and effort otherwise.
@mimusic1853
@mimusic1853 2 года назад
Appreciate the technique could’ve made the tutorial 5 minutes shorter. My goodness
@pierreverdoni
@pierreverdoni Год назад
1 hour job took 8
@FrawwfMedina
@FrawwfMedina 3 года назад
That lassesis about a week
@pierreverdoni
@pierreverdoni Год назад
ha ha i thought it was just me!!!!!
@giovannidicapo6213
@giovannidicapo6213 2 года назад
Music is bad & annoying
@moderngreyfarmhouse
@moderngreyfarmhouse 2 года назад
Good royalty free music is hard to come by. I will consider no music in the future, thanks for your input.
@maxi-me
@maxi-me Год назад
If only there were some type of button on devices that could lessen the volume, or even "mute" (for lack of a better word). How cool would that be?🤔
@missvaleria1722
@missvaleria1722 Год назад
Some people will complain about anything lol seriously should be thankful he took time to do a video that is helpful .. if you don't like it don't watch it.
@1966johnnywayne
@1966johnnywayne 2 года назад
Try steel wool in place of the sandpaper...it will follow the contours much better. And make sure to clean with iso alcohol before painting.
Далее
아이스크림으로 진짜 친구 구별하는법
00:17
Чёрная ДЫРА 🕳️ | WICSUR #shorts
00:49
Просмотров 1,6 млн
Spray painting a bathroom faucet
1:00
Просмотров 135 тыс.
How to spray paint tapware
3:04
Просмотров 598
Spray on Countertops | Stone Coat Epoxy
12:07
Просмотров 18 млн
5 INSANE Spray Painting Tricks EVERYONE Should Know
26:42
아이스크림으로 진짜 친구 구별하는법
00:17