Reloading PRS ammo step by step 

Thanks!

I appreciate the kind words!

Thanks Jerry!

Thanks Jeff! This process works well for me to get the results I'm looking for.

Thanks for watching!

Thanks for watching!

Now sell him a annealer elfster

That's a great idea! I will have to start doing that.

Thanks for the input, I will try it out!

The Giruad is under the bench, I just don't have a 6.5 pilot for it yet. I intended the video to be more of a process breakdown than a gear overview. I think I made that clear in the video. Reloading is more about the steps than the gear.

Great response Billy seems to be a lot of Nit pickers out there

I don't have enough experience on annealing to speak authoritatively on it. However, annealing is done before sizing. I have a home made induction annealer I just finished up. I should have some tests done with it in the next week or so. Still playing with it.

@@BillyRed182 I appreciate your honesty regarding annealing. It gives everything else you talk about more credibility.

I never use to anneal but found that I was getting about 8 firings for each case before neck cracking. I then started annealing about every 5 reloads and found the brass getting about 20+ reloads. I now anneal on every reload and my groups have tightened up significantly (from 1.25 MOA to 0.25 MOA). I started with a Bench Source annealer ($500) and about 6 months ago bought an AMP 2 annealer ($1300 but worth it).

The first step was to deprime the case. This allows the primer pockets to be cleaned as well as the entire case. The second cleaning was to remove the lubricant off the case when used to full length resize.

@@gorillamotors ah makes sense, thank you great info.

I use it for practice and competition. This brass has definitely been fire hardened. I recently made an annealer, so it's something to work on over the winter.

Was it too load when it kicked in? I thought I balanced it decent, but I am open to constructive criticism.