Тёмный

Remove Propane Tank Valve in 2 Minutes (No Special Tools) 

HNX Media
Подписаться 13 тыс.
Просмотров 535 тыс.
50% 1

Tired of watching videos that require special tools or "adapters" you have to build? It will take twice as long to watch this video as it does to remove your propane tank valve. Once you "break the threads" the rest is a piece of cake!
☯☯☯☯☯ Around the Web ☯☯☯☯☯
Like folklore, the paranormal and the unusual?
Check out our sister podcast Vast Unknown Radio on Spotify!
open.spotify.com/show/4UKSCcj...
And Anchor FM
anchor.fm/vastunknownradio
Vast Unknown Radio RSS Feed:
anchor.fm/s/4b871f04/podcast/rss
If you engage in any activity or project demonstrated in any of our videos, you do so at your own risk. I am what some folks occasionally refer to as a professional.
Need an amazing price on outdoor gear? Hit the link: www.theclymb.com/invite/sdh116
Interested in Folklore or the Paranormal?
Check out the mysterious puzzle T-Shirts at Parabox Monthly!
Use the Promo Code HNX10 and get 10% off your order!
Check out the link: www.paraboxmonthly.com
In the event that B-Roll footage or photographs are used (that I did not personally take), then the following applies:
All footage images used in this video are used legally for criticism, commentary & education, and are protected by the Fair Use Law/Act: Section 107 of the USC:
www.copyright.gov/legislation...
#Propane #Valve #WoodStove
DISCLAIMER:
Thank you for visiting our RU-vid page. The HNX Media RU-vid page is intended for informational, educational, and research purposes only.
HNX Media does not warrant the accuracy, completeness or usefulness of the information available on this RU-vid page. Nothing contained in or provided through this RU-vid page is intended to constitute advice or to serve as a substitute for the advice of any licensed professional (legal, medical, psychological, etc.). Any reliance you place on such information is strictly at your own risk. We may include links to other web pages, but these links are not an endorsement of those pages. HNX Media is not responsible for the content of any web site not operated by HNX Media.

Опубликовано:

 

8 ноя 2019

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 528   
@dr.froghopper6711
@dr.froghopper6711 3 года назад
I was just surfing and stumbled across this. It’s something that I have always wondered about.
@HNXMedia
@HNXMedia 3 года назад
I hope the video helped and gave you some ideas. Thanks for watching and leaving a positive comment.
@stewartbruce2409
@stewartbruce2409 3 года назад
I just removed my first propane valve today. No tree around so I placed pipe between handle spaces to stop it from rolling. Adjustable wrench on valve, with pipe for leverage. Total success because of your guidance, and some other options for the students of HNX media.
@HNXMedia
@HNXMedia 3 года назад
Awesome! Glad the video helped. It is always cool to hear people putting their unique "twist" on things.
@lo-fiFromChicago
@lo-fiFromChicago 2 года назад
That twist is from a different video tho
@ryansecakuku9312
@ryansecakuku9312 Год назад
Thanx I didn’t have ratchet straps and needed another option and yours was it. Thanks, got valve off today.
@stewartbruce2409
@stewartbruce2409 3 года назад
Thank you for an excellent video. Your personality very refreshing not hearing any over cautious directives coming from you. You treat us in the youtube classroom as though we can think and use logic. I appreciate your production. All the best from New Rochelle N.Y.
@HNXMedia
@HNXMedia 3 года назад
I very much appreciate this comment. It's words like these that really do inspire me to keep making videos. Thank you for taking the time to watch (I know you have better things to do). Stay well. Peace.
@stewartbruce2409
@stewartbruce2409 3 года назад
@@HNXMedia I and many others will stay tuned. Thank you and carry on soldier.
@Davidmwalter
@Davidmwalter 10 месяцев назад
Pretty direct and straight to the point. Not two thousand things to do. Thanks for the great video.
@HNXMedia
@HNXMedia 10 месяцев назад
Hope it helped.
@davidmaccormick6109
@davidmaccormick6109 3 года назад
thanks. Nice work. I appreciate the shortness of this video.
@HNXMedia
@HNXMedia 3 года назад
Glad you enjoyed it!
@hueypilot1950
@hueypilot1950 3 года назад
You make it look much easier than it was for me. But it did work with the pipe wrench and winch straps. I couldn't get enough friction with the straps and a tree, so I ended up lashing it down on a landscape timber at 90 degrees to the timber. Thanks for the video.
@HNXMedia
@HNXMedia 3 года назад
Lashing it to a landscape timber is a solid idea! Nice! Glad everything worked out. Best of luck with your project!
@mobodiford
@mobodiford 3 года назад
While I've never thought about taking the valve off of a propane tank I stumbled across this video and liked it thoroughly. Notably , I liked your logic the most.
@HNXMedia
@HNXMedia 3 года назад
Thanks. Hope the video helped and gave you some ideas.
@sofiadayag9179
@sofiadayag9179 3 года назад
Very informative and no BS!!👍
@HNXMedia
@HNXMedia 3 года назад
Glad it helped. Thanks for watching!
@janetwestrup6910
@janetwestrup6910 2 года назад
That intro 😍😍😍. That’s REALLY why I stayed and watched. 👍🏼
@HNXMedia
@HNXMedia 2 года назад
That's my Gypsy Trail Pom. She sneaks her way into a ton of my videos and is typically featured on the end screens. Thanks for watching. Hope the video was helpful.
@brandongeddes1008
@brandongeddes1008 2 года назад
I used a long pry bar on the metal above to hold it and bent it pretty significantly, but did break it loose. Thanks for the video!!!
@HNXMedia
@HNXMedia 2 года назад
Cool! Glad it worked out!
@robtait3401
@robtait3401 6 месяцев назад
Thank you. The tree idea is perfect. Never thought of that.
@HNXMedia
@HNXMedia 6 месяцев назад
I try to forget about my trees, but then they drop dead branches on me to remind me that they own the yard 😎
@martinhudson2657
@martinhudson2657 4 года назад
Easy Peezy Luisi very good video thank you for letting us join your little show bravo
@HNXMedia
@HNXMedia 4 года назад
Any time. Hope the video helped. Stay safe. Peace.
@BillGoudy
@BillGoudy 4 года назад
I like that ratchet strap to the tree... I will remember that for future use! Nice trick!! ;-)
@HNXMedia
@HNXMedia 4 года назад
I'd love to claim that that is an original idea, but I learned it years ago from someone else :)
@KnightBanditRider
@KnightBanditRider 2 года назад
"I believe they just call this a pipe" hahaha! Thanks for the quality content hoss! I have a couple of expired tanks that I want to also convert to a camp stove.
@HNXMedia
@HNXMedia 2 года назад
😎 Thanks! Hope the video was helpful. Good luck with your stoves and feel free to drop us a line to let us know how they turned out.
@rodman0088
@rodman0088 3 года назад
I love all stuff like this, subbed and looking forward to more interesting videos!
@HNXMedia
@HNXMedia 3 года назад
Thanks! Hope you enjoy my little journey into randomness with each video I make. Nice to have you along for the ride. Peace.
@1painter4hire
@1painter4hire 3 года назад
" I Believe They Call This a Pipe " 😂😂😂 Thank You Sir ! Be Careful With those Magical Tools 😉
@HNXMedia
@HNXMedia 3 года назад
I am just glad someone else enjoyed my rather mundane humor. Hope the video helped. Peace.
@drhodes4601
@drhodes4601 3 года назад
Oh my god, you saved my life! No one could be smart enough to do that!
@HNXMedia
@HNXMedia 3 года назад
I sense a little sarcasm...and I like it.
@jimjakosh2506
@jimjakosh2506 4 года назад
Thanks for the video. I put a 1" round bar through the top bracket of the tank and had the other end in my vise and I turned out the valve very quickly with a pipe and 2 large Crescent wrenches!! I had to cut through the head of the screw on the handle to remove it because it was a Torx drive with a pin in it and I did not have the right hollow bit to remove it
@HNXMedia
@HNXMedia 4 года назад
Glad the video helped. Thanks for taking the time to comment and add to the discussion. I like your ideas for this technique.
@300zxdriver
@300zxdriver 3 года назад
Do you have to loosen that screw to remove the valve from the tank? What exactly does that screw do?
@paulstaney325
@paulstaney325 3 года назад
Harbor Freight has a kit with most types of anti tamp bits for about 4 bucks, last time I checked.
@sxsboy2253
@sxsboy2253 3 года назад
I have to admit when I saw the tank strapped to a tree I thought for sure you were going to step back several yards and let loose with some sort of hand held artillery devise. I can’t believe removing the valve is as simple as that. I have a 7 1/2 gallon tank I think I going to make into a small barbecue. Thanks for the inspiration.
@HNXMedia
@HNXMedia 3 года назад
Possibly in the next video :)
@mikemcgown6362
@mikemcgown6362 3 года назад
When I was trying to get the valve out of my tank strapped to the tree, a .45 at 20 feet was tempting. Good thing I don't have one.
@misterdecaro
@misterdecaro 6 месяцев назад
Thank you for the tip, worked like a charm!
@HNXMedia
@HNXMedia 6 месяцев назад
Happy to help. Stay well.
@wannabescrapper72
@wannabescrapper72 Год назад
That's fantastic. I was wondering what tool I needed for this and luckily your video popped right up at the start. Now I don't need to spend any money and with a little extra time I can have those 20+ valves out easily. Thank you for this and I am now subscribed. Looking forward to seeing other tricks I can use.
@HNXMedia
@HNXMedia Год назад
You're very welcome! Glad I could help. Hopefully our other videos are as enjoyable, Stay well.
@paulmorrison8551
@paulmorrison8551 3 года назад
Simply outstanding!👍👍👍
@HNXMedia
@HNXMedia 3 года назад
Many thanks!
@antichrist_revealed
@antichrist_revealed Месяц назад
Glad to see you filled it with water. Safety first. 👍
@HNXMedia
@HNXMedia Месяц назад
Safety is my middle name - well, okay, my middle name is really "cheapskate-skinflint", but safety is in there somewhere 😎
@chrischarpentier3611
@chrischarpentier3611 3 года назад
Thanks for a simple explanation!
@HNXMedia
@HNXMedia 3 года назад
Hope it helped. Time to try it out and make something unique!
@miguelrivera3102
@miguelrivera3102 2 месяца назад
Worked first try. Thanks for the video
@HNXMedia
@HNXMedia 2 месяца назад
Happy to help.
@HuplesCat
@HuplesCat 4 года назад
Demo done like a boss. Sad you were not smoking as looking for Thursday Fun clips
@HNXMedia
@HNXMedia 4 года назад
Well damn, if I'd know that, I would have at least lit up a bowl and given you some quality footage. Now I feel bad :)
@AKLINTMURT
@AKLINTMURT 3 года назад
Good ! thanks for your lesson
@shawnjarman9860
@shawnjarman9860 3 года назад
Laughed out loud when you said “I think they call this “a pipe”
@HNXMedia
@HNXMedia 3 года назад
I'm glad some people enjoy my weak attempt at humor. Thanks for watching.
@jimlincoln1283
@jimlincoln1283 3 года назад
I did the same
@billwilliams5963
@billwilliams5963 3 года назад
Great job!
@SweetLuLund
@SweetLuLund 4 года назад
Quick and to the point. Perfect!
@HNXMedia
@HNXMedia 4 года назад
Glad it helped. Peace.
@3deeguy
@3deeguy 3 года назад
The straight-through valve alone made this video worth watching. It should make filling small tanks easier.
@HNXMedia
@HNXMedia 3 года назад
Yep! Did a video showing that a while back, long before I made this video. It is a true money saver. Pays for itself almost immediately.
@3deeguy
@3deeguy 3 года назад
@@HNXMedia Wow. I may have already seen that video. I gave that video a thumbs up. I have propane torches, a camping stove and several small propane tanks.
@kioschraffenberger3131
@kioschraffenberger3131 3 года назад
Thank you for the content. It will be useful.
@HNXMedia
@HNXMedia 3 года назад
Glad it was helpful! Thanks for watching and taking the time to comment.
@rorax42
@rorax42 3 года назад
Great tip! I look for the next video.
@HNXMedia
@HNXMedia 3 года назад
Awesome, thank you!
@danceswithbadgers4024
@danceswithbadgers4024 3 года назад
"I believe they call this, a pipe" Subbed. Made me snigger.
@wekapeka3493
@wekapeka3493 3 года назад
It wasn’t a pipe. It was a super thick washer. Cheers!
@HNXMedia
@HNXMedia 3 года назад
At least someone appreciates my weak attempt at humor. Thanks!
@HNXMedia
@HNXMedia 3 года назад
LOL.
@SuperReznative
@SuperReznative 3 года назад
"... as long as you can get purchase on that valve...." ;-)
@JAYJAYJAY53
@JAYJAYJAY53 3 года назад
Yes but where would I find a “pipe “ ? LOL
@grumpyg9350
@grumpyg9350 3 года назад
Fun to watch👍👍👍👍
@HNXMedia
@HNXMedia 3 года назад
Thanks! Hope it gave you some ideas.
@OlBlueshound
@OlBlueshound 11 месяцев назад
Nice job nice doggie too! Cheers for sharing
@allenjackson1371
@allenjackson1371 3 года назад
Good video all little tricks are great God Bless and stay safe
@HNXMedia
@HNXMedia 3 года назад
Thanks 👍
@giusepperomano1453
@giusepperomano1453 2 года назад
Thank you from Big Bear Lake, Ca. I was wondering how I was going to secure it.
@HNXMedia
@HNXMedia 2 года назад
Glad the video was helpful. Thanks for watching and taking the time to comment.
@kevinrobinson4509
@kevinrobinson4509 3 года назад
Awesome! Thanks! 👍👍👍👍 a couple extra thumbs up for you sir.
@HNXMedia
@HNXMedia 3 года назад
Thank YOU! Now go forth and build something awesome!
@kevinrobinson4509
@kevinrobinson4509 3 года назад
@@HNXMedia already have the valve off and full of water. Just need it for a return tank for butane. Thanks again
@DaveNanan
@DaveNanan 2 года назад
Nicely done!
@HNXMedia
@HNXMedia 2 года назад
Thanks! Hope the video was helpful. Stay well.
@johnnywhite1681
@johnnywhite1681 3 года назад
Very simple and effective, thank you!
@HNXMedia
@HNXMedia 3 года назад
Glad it was helpful!
@markomendoza4960
@markomendoza4960 10 месяцев назад
Getting ahold of the tank - that's the trick, isn't it? Thanks for your help!
@HNXMedia
@HNXMedia 10 месяцев назад
Ain't that the truth. Getting ahold of them is getting harder and harder.
@SirFency
@SirFency Год назад
best video on this subject yet.
@HNXMedia
@HNXMedia Год назад
Thanks! Hope it was helpful to you. Stay well.
@SirFency
@SirFency Год назад
@@HNXMedia I've got 3 tanks at home right now I turned upside down for the last few days to let the propane leak out. When I get home I can fill them with water then start cutting them up.
@PirateChiefPC1
@PirateChiefPC1 2 года назад
I can guess by the old school desert Cammo Blouse that you might be a vet. Is so..... Good on you Brother. ENC USN(Ret)
@CandSMINING
@CandSMINING 6 месяцев назад
Thanks for sharing your thoughts and experience pulling that brass valve from a Propane bottle. New sub to you.😎😎⛏⛏🔥🔥
@HNXMedia
@HNXMedia 6 месяцев назад
Hope the idea was helpful.
@CarJaco
@CarJaco Год назад
Awesome, thank you sir!
@HNXMedia
@HNXMedia Год назад
Happy to help.
@paulellis1938
@paulellis1938 3 года назад
So I would say you're American I was told in Australia that gas friends were all opposite but I'll give it a go and see if it works as I recycle copper brass thanks for your lesson
@pierreqiu8147
@pierreqiu8147 Год назад
So my friend does this method work for you all you got a better way to remove the valve..,👏👏👏👏👏👏
@clambert2020
@clambert2020 3 года назад
Well done. Thanks.
@HNXMedia
@HNXMedia 3 года назад
Hope the video helped and gave you some ideas. Thanks for watching. Peace.
@jamesleon2770
@jamesleon2770 3 года назад
Nicely done mate
@HNXMedia
@HNXMedia 3 года назад
Thanks 👍 Hopefully the video helped
@Maggie-Gardener-Maker
@Maggie-Gardener-Maker 5 месяцев назад
Thank you for this very helpful video, now I wish I wouldn't have chucked that old 20 pound tank but I do have two old 30 pound tanks that are past the expiration date and can't be filled anymore. They came with my old camp trailer. I been wanting to make something out of them but every welder I know won't touch them. Now I can take off the valves and fill with water. I would like to make something with them myself but I don't have welding equipment. I looked through your video for one where you made something from that old 20 pound tank but I couldn't find a video, did you do one yet?
@Up_North_Adventures
@Up_North_Adventures 5 месяцев назад
Thank you so much!!!!! New subscriber.
@HNXMedia
@HNXMedia 5 месяцев назад
Glad it helped. Your support is greatly appreciated! Stay well.
@johns6816
@johns6816 8 месяцев назад
Saw it in another YT but using some Dawn in the tank after the initial water purge can help reduce any oily residues that might possibly burn during cutting.
@HNXMedia
@HNXMedia 8 месяцев назад
Dawn - "Takes grease out of your way."
@DaveyBlue32
@DaveyBlue32 3 года назад
Awesome... great job!👍👍
@HNXMedia
@HNXMedia 3 года назад
Thank you! Cheers!
@DaveyBlue32
@DaveyBlue32 3 года назад
Right on! I just made one a little air tank for the scrap truck... super handy... I definitely would make a little stove... the yard won’t take them even cut...😂😂😂. Don’t blow yourself up! I like the small tank bleeder idea!!!
@joshsundiwa
@joshsundiwa 6 месяцев назад
Thanks for sharing
@HNXMedia
@HNXMedia 6 месяцев назад
Thanks for watching! Hope it helped.
@doomslayer4341
@doomslayer4341 2 года назад
Nice thanks was curious about this
@HNXMedia
@HNXMedia 2 года назад
Hope the video was helpful. Thanks for watching and taking the time to comment.
@chopsddy3
@chopsddy3 2 года назад
Exactly what I needed to see! Thanks. BTW, my Fiskars hookaroon arrived yesterday. Oh yeah! 👍 It’s an ugly bugger but it works great!
@HNXMedia
@HNXMedia 2 года назад
Nice! Have fun with it and get some solid work done!
@mpugliano
@mpugliano 3 года назад
Great video ty
@roseymalino9855
@roseymalino9855 7 месяцев назад
I expected that strap to shear rather than the valve loosen. I wonder whether someone had loosened it previously? Congrats for your success.
@gastongutierrez9083
@gastongutierrez9083 3 года назад
Genial. Thanks!
@Fireship1
@Fireship1 3 года назад
I’m missing the tree. I believe it’s a special tool. Lol. Great video!
@HNXMedia
@HNXMedia 3 года назад
Get planting, you can finish the project in 15 years 😄
@davidmorgan7586
@davidmorgan7586 3 года назад
thank you
@kirbymorris9555
@kirbymorris9555 3 года назад
I used a 2 ft length of 1/2 pipe along with the ratchet straps. Didn’t cost a thing. Thanks for a very informative video.
@submechanophobia768
@submechanophobia768 3 года назад
What does that small screw do? Most valves a velocity check valves in them and they will close if the propane is vented too quickly. You can here it click if the valve is opened too quickly and it doesn't take much when the valve is not connected to anything.
@crohkorthreetoes3821
@crohkorthreetoes3821 Год назад
Thank you sir! I should have been able to brain that out on my own. But I never even thought of it... problem solved.
@HNXMedia
@HNXMedia Год назад
Glad to helped.
@veggiepowered
@veggiepowered 3 года назад
I'am Your Newest Subscriber Great Videos
@HNXMedia
@HNXMedia 3 года назад
Welcome aboard! Hope you find some useful information and some humor in our random little channel. Peace.
@personjfreak
@personjfreak 3 года назад
I'm a propane tech just checking the interwebs for idiots. You are not an idiot. The water purging step at the end was such a relief. Thank you for not blowing yourself up. One quick thing though, I do believe that adaptor you put on it has a check valve, and wouldn't have actually let any gas out unless a bottle was connected on both ends. But i could be wrong.
@HNXMedia
@HNXMedia 3 года назад
I take this as high praise coming from a real tech! Thanks for watching and taking the time to comment. Stay safe and I will (try) to do the same. Peace.
@stevehouston5650
@stevehouston5650 3 года назад
I couldn't find the pipe in the tool section at Home Depot. I will try Lowe's.
@HNXMedia
@HNXMedia 3 года назад
You might have to special order it - 6-8 weeks for delivery 😎
@SpringRubber
@SpringRubber 3 года назад
A chain link fence upright or horizontal would also work -- except I can't find one because my HOA doesn't allow chain link fences. Happy to report that I found a youtube video showing how to make one for next to nothing with a bunch of tools.
@HNXMedia
@HNXMedia 3 года назад
@Jesse Terrance Nice!
@elizabethwinsor5140
@elizabethwinsor5140 3 года назад
Thanks x
@HNXMedia
@HNXMedia 3 года назад
You’re welcome 😊
@GunsKnivesandBeer
@GunsKnivesandBeer 4 года назад
You made it look easy.
@HNXMedia
@HNXMedia 4 года назад
It's my job to make things look easy :)
@craigkucing9779
@craigkucing9779 3 года назад
I wonder how many people know what 'purchase' in this context means in this age of consumerism.
@HNXMedia
@HNXMedia 3 года назад
You, sir, are a scholar and a gentleman. A man after my own heart. Oft times I throw words and phrases into my videos just to see if anyone is paying attention. Thank you!
@craigkucing9779
@craigkucing9779 3 года назад
@@HNXMedia In the movie Blaze, Paul Newmans' character Earl Long was asked why he wore his (Cowboy) boots when making love and he said they give him "Purchase". I have remembered it ever since.
@HNXMedia
@HNXMedia 3 года назад
@@craigkucing9779 Holy crap, I remember that movie!
@andrewbratos6907
@andrewbratos6907 3 года назад
thats great, I always say, GOTTSUM HOLD
@SquareDancevideos1
@SquareDancevideos1 2 года назад
@@HNXMedia mom
@juanchomalanga
@juanchomalanga 3 года назад
very good idea , antes casi dañe la rosca , thanks
@HNXMedia
@HNXMedia 3 года назад
Hope the video helped. Peace.
@casycasy5199
@casycasy5199 3 года назад
great tip
@HNXMedia
@HNXMedia 3 года назад
Glad it was helpful!
@michaelbasher
@michaelbasher 2 года назад
Wow, cheers there... now back to turning it the right way.. ha ha
@randallhutchcraft4039
@randallhutchcraft4039 3 года назад
Supposed to be epoxies glue on valve and not able unless you cut it out?
@scotte2815
@scotte2815 3 года назад
short and sweet
@jasonbuss5132
@jasonbuss5132 4 года назад
Thank you so much. Was a snap once I tried your way!!! Totally helpfull
@HNXMedia
@HNXMedia 4 года назад
Super happy my video helped. Hopefully you are making something cool out of the propane tank. Would love to see it. Please share! Be safe! Namaste!
@christophercollins3460
@christophercollins3460 Год назад
Great idea
@HNXMedia
@HNXMedia Год назад
Thank you! Cheers!
@camperjack2620
@camperjack2620 3 года назад
Thank you.
@HNXMedia
@HNXMedia 3 года назад
No worries!
@NooneStaar
@NooneStaar Год назад
TY!
@HNXMedia
@HNXMedia Год назад
YW
@mrc1539
@mrc1539 3 года назад
I swear I could smell it when you opened that 10% valve . 😩 !
@HNXMedia
@HNXMedia 3 года назад
You and. me both :)
@edstransitscott9186
@edstransitscott9186 3 года назад
Good to know
@yamati150
@yamati150 3 года назад
I feel cheated... Seriously... I needed step by step instructions of the gas displacing water magic trick. Or, we can save that for a video at a later time? Thanks for the video!! I've aways emptied them at 100 yards with a M1 Garand and a lit candle, but your way works, too.
@HNXMedia
@HNXMedia 3 года назад
I'm going to try your way next time.
@billmiller789
@billmiller789 3 года назад
@@HNXMedia It works well and you get a little excitement as a bonus
@chuckfischer7202
@chuckfischer7202 3 года назад
I have used that same opener. No candle though, live in a pine forest.
@dancanavan2812
@dancanavan2812 3 года назад
@@HNXMedia make a video when you try it.
@jerseydevil7895
@jerseydevil7895 4 месяца назад
Good, informative video. Is it safe to replace a defective valve yourself? Have a brand new 5 lb. tank that would cost more than purchase price to have done at a dealer.
@HNXMedia
@HNXMedia 4 месяца назад
I have never replaced a valve - so I am hesitant to give advice on it. I am not sure what the torque spec is or if there are specific sealants used on the valve. I think it can be done, but I have never done it. Thanks for watching and taking the time to leave a comment. Stay well.
@scroungyredneck936
@scroungyredneck936 3 года назад
Common sense is so rare it's almost extinct
@offroadinfidel1916
@offroadinfidel1916 3 года назад
Common sense is now a super power.
@tcmtech7515
@tcmtech7515 3 года назад
Basic sense is also in extremely short supply.
@craigkucing9779
@craigkucing9779 3 года назад
Common sense is not common any longer.
@SodiumInteresting
@SodiumInteresting 2 года назад
good video thanks
@HNXMedia
@HNXMedia 2 года назад
Hope it helped give you some ideas
@SodiumInteresting
@SodiumInteresting 2 года назад
@@HNXMedia yes although I didnt do all these steps. I just opened the valve on one today filled it with water then cut the top off. I could see that purgeing with water was important though, or rather I could smell it
@SodiumInteresting
@SodiumInteresting 2 года назад
@@HNXMedia im attempting to clean the inside with electrolysis atm. prob not really necessary for forge building but hey
@17hmr243
@17hmr243 3 года назад
nice will try
@HNXMedia
@HNXMedia 3 года назад
Hope the video helped.
@steven.h0629
@steven.h0629 3 года назад
Another pipe through the skirt holes saves a ton of setup time.. 👀
@mikemcgown6362
@mikemcgown6362 3 года назад
That didn't work for me.
@SuperReznative
@SuperReznative 3 года назад
💃
@Don.Challenger
@Don.Challenger 3 года назад
Lend your wife some money for a new wardrobe and she'll help with your outdoor equipment work and likely more besides (offer to do the dishes, laundry and ironing - you will smile more and she will too).
@mikemcgown6362
@mikemcgown6362 3 года назад
@@Don.Challenger my wife had nothing to do with the problem. I was doing this while she was at work. And I do run the laundry and wash the dishes. I try to make her feel appreciated and loved. I'm trying to keep myself busy while dealing with my MS disability.
@Don.Challenger
@Don.Challenger 3 года назад
@@mikemcgown6362 Very good. But I'm sorry I think that I misinterpreted your comment as being comical and responded erroneously in kind.
@ismaelbeltranpaulino7999
@ismaelbeltranpaulino7999 4 года назад
Thanks 👍😉
@HNXMedia
@HNXMedia 4 года назад
Hope it helped.
@ismaelbeltranpaulino7999
@ismaelbeltranpaulino7999 4 года назад
@@HNXMedia Yes
@gordbaker896
@gordbaker896 3 года назад
I use a long crow bar and go thru the slots in the handle
@MaaveMaave
@MaaveMaave 3 года назад
Ya I didn't have ratchet straps. 1 long pipe through the handles, place tank on its side, apply cheater bar
@larryarnold5017
@larryarnold5017 11 месяцев назад
Did you ever make anything out of this tank Looked back thru you videos didn’t find one Maybe I missed it Thanks for maki;g the video
@staceysowers245
@staceysowers245 Год назад
Just got an old tank to use for a project but it still has some gas in it. There is no valve, just duct tape over the hole. Can I still use a hose to fill it with water? I read that the gas will sink into low spots and remain flammable.
@HNXMedia
@HNXMedia Год назад
If there is just duct tape over the valve, then any gas in that tank will be minimal. Yes, just fill it with water (overflowing) and let it sit outside for a day. It will stink something fierce, but will be fine to work with after that. The odor will eventually go away, but it can be rough when you first start working with the tank. Be safe.
@patricklions9066
@patricklions9066 Год назад
Do you need to have the tank "vacuumed" before having it filled for the first time after replacing the valve?
@HNXMedia
@HNXMedia Год назад
I would think so, but I am not a propane tech. I only remove valves to use the tanks for other projects.
@Mayhemcountryliving
@Mayhemcountryliving 2 года назад
Lol great video
@HNXMedia
@HNXMedia 2 года назад
Glad you enjoyed it 😎
@bctruck
@bctruck 4 года назад
So I could have used a pipe instead of buying the snap on valvinator 3000??? Crap!!
@HNXMedia
@HNXMedia 4 года назад
LOL. Don't give Snap On any ideas. They will be marketing that to the ignorant masses within the week.
@deanstackhouse8775
@deanstackhouse8775 Год назад
Timely video for me finding an old camper tank has a leak at the valve stem and I'm looking to see if there is an "O -ring" that can be the fix. Did you ever do this ? Thank you for the video... New sub here with notifications
@HNXMedia
@HNXMedia Год назад
I think a lot of them are sealed with "pipe dope." I have never replaced an o ring on one. Not sure if I would risk it.
@deanstackhouse8775
@deanstackhouse8775 Год назад
@@HNXMedia Thank you muchly... I'll choose to trust your judgement. Fare well friend... Safety First P.S. I just realized that I may not have been clear as to the issue I'm seeing with the valve leak ... The leak is not where the valve threads into the tank but is at the point where the valve stem passes thru the brass but (the one with reverse thread indications notched into it). I do recall being at a North Idaho Propane and saw the sales clerk offer certain "O-rings" to a customer for the valves though I believe they were small ones that seal the bleeder screw and so do assume that some repairs are/were considered OK to do... This was, however about 10 years ago.
@foxwood67
@foxwood67 3 года назад
You'd be surprised how many people dont know why you added water to tank
@HNXMedia
@HNXMedia 3 года назад
Yep. Simple things that can be overlooked. Thanks for watching and taking the time to comment. Peace.
@assassinlexx1993
@assassinlexx1993 3 года назад
You can tell those people by the fact they have a L and R on their shoes.
@rickdees251
@rickdees251 3 года назад
" people don't know why you added water to tank" That's just one isolated factoid. I'm never surprised how much lack of in depth knowledge most people exhibit on matters they feel feel particularly competent in. Look up the "Dunning Kruger Effect" and read about why that is the case, it very interesting. The lack of basic overall knowledge for a high percentage of people is epidemic today, imo. I'm 69 and it never stops coming up, the lack of real in depth understanding content providers show when making a how to video which they feel adequate in. The hardest part is being effectively diplomatic enough to not be painted as a hater and troll when pointing out short comings in a video or presenter's methods/Knowledge. Ignoring it and not commenting is the safest. Cheers.
@jtoombs56
@jtoombs56 3 года назад
Lots of comments here about why add water but know one has provided an answer. Also, my feet hurt every other day or so and someone else said it would be helpful to mark the shoes L and R but how am I supposed to know which letter goes on which one and how would that help anyway? I painted a floor the other day but left tracks on it when I was finished and my wife laughed at me. I still don’t think it was funny, I had to get out somehow.
@foxwood67
@foxwood67 3 года назад
Don't know if some of these comments or a joke or not the reason why you would add water to any vessel before cutting or welding is to purge any residual vapors or even liquids from the interior many people have been seriously injured or killed for failing to do a simple step. People assume that because the vessel is empty that the danger is gone but in fact they are still very dangerous.I fill vessels until they are overflowing and l continue to overflow for several seconds just to make sure no Boom
@jq71
@jq71 3 года назад
Stick another pipe through the valve guard and you don't need the ratchet straps. Levers.
@hatteraslabuf
@hatteraslabuf 3 года назад
Di you ever make the grill out of the propane tank? I couldn’t find a video.
@HNXMedia
@HNXMedia 3 года назад
It is actually about halfway done. My welder died on me and I do not use a welder enough to justify buying a new one. The "partially built" wood stove is sitting in my garage. As soon as I can figure out how to finish it without welding, I will post the video. I did a lot of filming before the welder died, so I have the original footage to complete the vid.
@johnr5545
@johnr5545 7 месяцев назад
Thanks god bless
@HNXMedia
@HNXMedia 7 месяцев назад
Hope the video was helpful.
@makagallinger
@makagallinger Год назад
My man!
@HNXMedia
@HNXMedia Год назад
Hope it was helpful. Thanks for watching and taking the time to leave a comment. Stay well, stay safe.
Далее
Клип Уже На Канале #янгер #shorts
00:15
How to Remove Propane Tank Valves - Best Methods
8:04
No Electircity Needed Heater
11:39
Просмотров 3,1 млн
How these impossibly thin cuts are made
9:37
Просмотров 11 млн
Cambio de valvula tanque gas LP
5:11
Просмотров 86 тыс.
Клип Уже На Канале #янгер #shorts
00:15