Removing Dashboard from Suzuki Samurai  

I got a bit sad when I discovered I had a hole the size of my fist under the clutch pedal (wasn't visible when I bought the car) meanwhile this absolute savage has a samurai with no footwell floor. You are the best!

Woop woop! Thanks Tony! Badly needed this!

Thanks for posting this one, I know I’ll have to take mine out eventually.

Thank you for this video, Lorenzo, from Pisa, Italy

Some great tips!!!

Thanks for sharing the ideas, brother. Love your videos they are in detail and quite entertaining. I wish you guys had Jimmy's in USA also but only Samurais were imported there in the 80s

Aaaaaaay Tony. Thanks. Hope it works the same on a 86 Jap tin top. Gotta pull the heater because it’s leaking inside and the motor is missing full throttle aswell. Great s from across the pond!

Living the high life!!

I'll be ordering more stuff from you, but I have, what I believe to be the whole A/C system including the dash part with the A/C button. My question is, does the wiring harness have all the plugs I need to just plug in? Or do I need the wire harness he supplied me with also along with the ECU? Which he gave me also. I WILL be needing the compressor bracket for sure. Thanks in advance. I'm having a cold one with ya. LOL

you have some great videos! I have a 88(.5?) sammy and need to get the gas tank down do you have any tips or tricks? keep up the good work

Any chance you would consider a video on switching out the steering wheel on a Samurai?

Hola 👋 ya tienes un nuevo suscriptor !! Saludos desde 🇲🇽 👍

Love your videos man . Just got back from a utah muzzle loader dear hunt . Success 🤪 my 87 Sami did everything I could expect. That being said he or she depending on the day could use a lower gear. Would you suggest a regear or a splitter.

I was able to time my 1993 Escudo by watching your video. But now I need to set the valves which I don't know much about. Could you please make a video showing how to set the vavles for 1993 16 valve engine please? Thanks. I have subscribed. And when can I expect to see it?

Got any videos on removing the bezel from around the air selector and radio? I think I have a loose or broken cable that controls the air "vector" doors. I just reached under the dash and set it to defrost. I gotta have that.

Is that Fred Flintstone's car?

Taking shit apart is easy. Putting it back together, not so much.

How can I buy a speedometer with rpm meter?...bcoz my samurai has no rpm meter

what is the best option for a replacement dash? or can a guy restore the original. thanks

Do you think a Suzuki Alto dash or Suzuki Hustler dash and engine/sensors/displays would fit/be compatible with the Samurai dashboard?

Quick question, is it possible to access the wiper motor just by releasing that longer plastic screw cover on the passenger side?

What part is behind the dashboard to bring the heat and cold???

Bonjour ! Je viens de démonter le tableau de bord mais comment fait on pour sortir ensuite tout le bloc-chauffage please ? Thanks for yours vidéos !

Am looking for a source of parts for a 97 geo tracker . Any info appreciated.

Im looking for an under dash panel, how to I order it?

Hey, i need that rh upper dash/wiper motor cover.

Dude Are you going to restore it?

Hello where is the chassis number and plate located ok this sj410?

do you sell the boby

I cannot find a springs/suspension video do you have one? I put new springs on my Sammy that are HD but now it rides like a brick however the shimmy my gearing has going between 1 and 2nd went away. Solved one issue but created another one.

wish i could find a brand new dashboard

Anybody know a website to buy a new dashboard for a 1989 samurai

Oy yeah, it's a 1989 Sidekick

Got a question for you. I have a 1988.5 Samurai with a 1.3L engine. It has a carburetor. It's go the square vents. My check engine light is on. I went to reset the check engine light with the check engine light switch under the dash but found that the three wires that come from the switch are not connected to anything. It appears that the previous owners likely replaced some of the instruments and didn't reconnect the switch. Is it possible to clear the check engine light without the switch? I tried removing the negative battery terminal but that did not work. What causes that light to come on anyways? Is it purely a maintenance warning light or could there be something wrong. I can't find any information about it other than it is a warming light for maintenance purposes. Thanks,

Well shit, releasing the hood release cable was the only reason I clicked on this video, only to be told 7 minutes in that it’s the only thing not covered in this video