Removing fan and low boy trailer repairs 

Come on ClintON , you know this video is at least 2 months old dont ya?? LOL How do you guys go about tough grease fittings? You use the penetrating oil pen thing that you hit with a hammer that injects the fluid into the fitting?

Yup got it thanks buddy

I know a dept. that did something similar except it was height, they measured to the roof line and forgot about horns and light bar. Instead of adjusting the door height they put the horns and lights on a flip down bracket which was a total disaster in itself.

*Only for fans over 18 years old* girl in perfect BODY G BUNNYGIRLSS.SITE ❤️ cup milk god & perfect erotic body constriction god Toro face transcendent beautiful sister like a famous model tricks I do not know Megan: "Hotter" Hopi: "Sweeter" Joonie: "Cooler" Yoongi: "Butter So with toy and his tricks, do not read it to him that he writes well mamon there are only to laugh for a while and not be sad and stressed because of the hard life that is lived today. Köz karaş: '' Taŋ kaldım '' Erinder: '' Sezimdüü '' Jılmayuu: '' Tattuuraak '' Dene: '' Muzdak '' Jizn, kak krasivaya melodiya, tolko pesni pereputalis. Aç köz arstan Bul ukmuştuuday ısık kün bolçu, jana arstan abdan açka bolgon. Uyunan çıgıp, tigi jer-jerdi izdedi. Al kiçinekey koyondu wins taba algan. Al bir az oylonboy koyondu karmadı. '' Bul koyon menin kursagımdı toyguza albayt '' dep oylodu arstan. Arstan koyondu öltüröyün dep jatkanda, bir kiyik tigi tarapka çurkadı. Arstan aç köz bolup kaldı. Kiçine koyondu emes, çoŋ kiyikti jegen jakşı dep oylodu. # 垃圾 They are one of the best concerts, you can not go but just seeing them from the screen, I know it was surprising 💗❤️💌💘

yup i seen it too. here in Canada it would never get that bad, as we have to have a shop do a safety inspection on all trucks one ton and up, and trailers over 10,000 GVW every 12 months, with a yellow safety sticker in the driver side window, it cost me $1200 a year for the inspection for my 5 ton and $600 for my 14,000 gvw trailer, not including any parts or repairs, all wheels have to come off,the shop go over it like a fine tooth comb. its there shop and mechanics license on the line, worst is so much as a hair line crack on the wall of a tire it fails, there just whether cracks, how many tires i have had to change were the tread 9% new bu a small side wall crack.. $1200 each an Michelin tires are the worst, my front steer tires didnt even have 1500 miles on them and had to replace both front tires. Michelin refused to go good on them at all, both tires had a small star crack. jumk.. $2700 gone. my 4 back re-treads have been on that truck for years no cracks

@@arnoldromppai5395 Wow

@@arnoldromppai5395 wow, glad we don't have that here

@@zaccheus ya wish we didnt, i even have to do it on my farm plated trucks trailers.

Thank you 🤙🏻

My neighbor uses the lock and lube grease buster… another thing that works, for me, on some fittings is to change the pressure in the joint. Sometimes adding down pressure or uplift will open the flow.

I was thinking of the same item but it’s still likely better to remove the pins since the grease might flow but only on one side of the pin.

in the town I live the village barns ,, the shop where they fix there trucks for road work and plowing ,, with the snow plows on could not fit the truck in .. they cut a notch in the wall .. they remove that chunk when they need to pull a truck in with a plow .. would have looked better if they just put a 2 foot wider door up instead ,,

@@randytravis3998 small town budgets… small town fixes… when I was a kid in the late ‘50s… the town bought a home made, water filled, roller from a councilman’s welding shop. They pulled it down the unpaved roads before they oiled them… to keep the dust down. (The oil came from the mayor’s brothers service station. It was from his oil change sump.) Come winter, the roller froze. The welder councilman, who had sold it to the city, offered to repair it for standard shop rates. The Mayor and a couple of other councilmen objected. They finally approved three motions: 1. The welder councilman could do the repair, but at a discounted rate. 2. He must refill it with antifreeze mix to prevent recurrence. 3. The antifreeze mix was to be purchased from the Mayor’s brothers service station! When my dad told this story, he always added… “Town business was almost as in-bred as the population!”

I agree

You've obviously never removed cutting edges on equipment, when it comes time to replace cutting edges the bolts are most of the time with a cutting torch or air arc gouging. Dirt gets packed in the threads and the nuts get rounded off.

Those things work really well... You are talking about the long looking pen thing filled with the penetrating fluid that you put on the fitting and smack with a hammer , right?

@@warrenmichael918 yes sir! That’s the one!

Yup stay tuned

@@DirtPerfect 👍🏻

Thanks 👍

HaHa, unfortunately as rough as you think DPs trailer was, there are many many more trailers on the roads that are about to fall apart!! This wasnt really as bad as they made it seem. Yes, it needed the repairs badly but other then the u bolts about to fail, the rest was just needing maintained and fixed up.

Yup awesome guys

It sure has been fun to see how that developed. Clint ( and family )is absolutely the kind of guy to do business with, AND have as a good friend.

As a kid all i wanted was a Schwinn Lemon Peeler or an Apple Crate those bikes were the stuff..

I built and sold skateboards in 74-75 to pay for my own boards, and you could get urethane wheels and buy sealed roller bearings back then, but the bearings were from electric motor suppliers until they became common. The hot setup was a set of tracker trucks with the urethane wheels and sealed bearings. Have a great day.

Yup stay tuned you will see

Very happy with what i got thanks

@@DirtPerfect didn't you say something like this with the first 850J.

No sir not at all worked perfect

thanks for taking the time to reply it is much appreciated as a lot don't Cheers

No problem appreciate it

lol side tracked

Have videos on the channel doing that stay tuned

Will not work on this stay tinned will see why