Removing Gaps in Embroidery Satin Stitches - Embroidery Digitizing Tips & Tricks

Подписаться 86 тыс.

Просмотров 16 тыс.

50% 1

In this video, John demonstrates how to remove gaps in a satin stitch design without having to re-digitize the whole design. Using Hatch embroidery software, John walks through the process of editing the design and adjusting the stitch spacing to create a flawless finish. Be sure to follow along to learn some helpful tips and techniques for editing embroidery designs and achieving professional-looking results.
Thanks for watching!
Design Doodler Software:
www.digitizing...
*Free Embroidery Embroidery 101 Cheat Sheet:
www.digitizing...
Free Embroidery Legacy Design Kit:
www.digitizing...
Interactive Digitizing Lessons here:
www.digitizing...
Embroidery Fonts: www.digitizing...
Need fonts for Hatch, Wilcom, or Janome software?
www.digitizing...
Facebook:
/ johndeerembroidery
Instagram:
/ embroiderylegacy
Facebook Group:
/ embroiderylegacy
Our Recommended Amazon Embroidery Products:
www.digitizing...
Subscribe to our newsletter: www.digitizing...
Please subscribe to our channel for more videos and embroidery challenges.

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 23

@MsMrWiz Год назад

Just love these segments. The simplest solutions to take a good design and make it great. Basic rules and foundational awareness will always be the way to start.

@ttowntshirts Год назад

Thanks for the video. It was really hard to pay attention with the background music. It seamed pretty loud and hard hear you at times. Thats one thing I would ask if you could turn down next time.

@juliehardy247 Год назад

Thank you John, great video very helpful

@savinggrace70 Год назад

This is a super helpful video. Thanks John!

@gillscarisbrick645 Год назад

Thank you John.

@rehab6232 Год назад

I hope one day to see you on the reality. Secondly, thanks for the valuable information. We also need continuity in the Hatch program, because for a long time you have not downloaded videos with the Hatch program. This is Rehab from Saudi Arabia

@ilhamlakhal3067 Год назад

Many thanks for these tips! I do wonder how you would digitize this design with these type of shapes if you were to do it from scratch…

@ClaudiaArnold 5 месяцев назад

That's what I would like to see, too.

@faviolamartinezsewdigitizing Год назад

Super good fix of a poorly digitized design without having to redo the whole thing! Thanks John. Also, just a note about the background music, there were other voices coming through while it was playing, is that a RU-vid thing?

@maryr1441 Год назад

Thank you for the grate information

@mateu210 Год назад

so helpful !!! thank you !

@jessiegibson9023 Год назад

Good video thanks you did good

@eecom Год назад

Thx a lot 👍

@ClaudiaArnold 5 месяцев назад

Considering that the original design had rather generous overlaps between the objects and they still separated, I wonder how much of it is actually the design and how much is due to bad hooping, weak stabilizer and maybe not entering the fabric you intend to use and leaving the software at the all-forgiving, default poly cotton?

@MFnMelaroni Год назад

Hi, I'm wondering how to makes the ends of a line curved or eased so that its not sharp corners on the ends of lines? For example, on a smiley face mouth. In Hatch😊

@systekinc Месяц назад

I am having major problems with the same issue. Orange butts to white... Long satin stiches that move...

@systekinc Месяц назад

What are your thoughts on the Coldesi DesignDeck software? I cant seem to find where to change the angel of the stich, it appears all is done automatically.

@Texaschic79915 5 месяцев назад

Hello, I’m trying to troubleshoot my embroidery design. I am doing a glitter htv appliqué on a tshirt and I’m getting gaps. The person that made the design said since I only paid 3.60 I needed to figure it out myself. True story. I bought the MAMA design for a 5x12 hoop and when I used the glitter htv I saw gaps after it finished. Any advise would be appreciated.. is it user error (me) I am new at embroidery too. Thank you

@RandelNdlovu-uk8fn Месяц назад

hi gusy im kindly asking for help with embroidery software how to adjust stitches

@emmypark2801 Год назад

I have gaps in between my stitches from a photo that I digitized using the colorstitch tool. What's the best way to fill the gaps in the design?

@feralnomad Год назад

I'm new to embroidery. I have designs that have gaps in them but I'm wondering if it's a digitizing issue or if it's hooping or machine tension. On a recent design, in the digital file it's even, but when I went to embroider it, I noticed gapping issues and that it was shifting to the left. The gaps on the left were larger, and some of my design overlapped but only on the left side. What could cause this pulling?

@KHONAMII 7 месяцев назад

I have the same problem! 😭

@feralnomad 7 месяцев назад

@@KHONAMII I took a break from embroidery and came back to it recently. I haven't attempted any old design, but I've been doing things differently now. When designing embroidery files, there was one feature that removed overlaps, and I've found that it was a major cause of my gapping. As far as the shifting is concerned, I still don't have a solid answer because every new design I've made has come out perfect.