No video :(

Removing pin from Hydraulic Ram

Подписаться 107 тыс.

Просмотров 32 тыс.

50% 1

I am removing the pin that holds the hydraulic cylinder in place. This is proving to be way more difficult than I thought it would. It was a fun project but it was very tight in there. In the end the sledgehammer worked the best to get the pin out.
It really is time to get your pre-emergent ready and in your possession. You can get it here
ANDERSONS PRE EMERGENT: shrsl.com/3dsmy
Lawn Rebel Merch: lawnrebel.com/
Pro Plugger: lawnrebel.com/...
Eley HOSE REELS (these are the BEST REELS): www.eleyhosere...
ERCH: lawnrebel.com/
Contact:
connor@lawnrebel.com
PO Box 6392
Logan, UT 84341
#lawnrebel #connorward #hydraulics

Опубликовано:

29 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 107

@johnhamilton9229 2 года назад

Good for you for over coming your challenge. Can’t wait to see part 2.

@Squeezedsn95 2 года назад

Just a suggestion, I assume you have completed the job already, use the bolt pulling setup like you had on one side (place tension on the pin) then hit the other side with the hammer. In an ideal situation you would use a spacer and all thread (grade 8) long enough to receive the entire pin and with the combination constant pressure coupled with the shock of the hammer it should come out easier.

@Squeezedsn95 2 года назад

Do the similar thing to install it.

@Y0u.kn0w.wh0 2 года назад

I’m so happy it’s starting to get closer and closer to lawn season, more videos from my favorite people. Have a blessed one Connor!

@alainapotaduh 2 года назад

Way to bang one out, Connor! You've been at it for a while.

@stevestratton1888 2 года назад

Definitely caught me off guard with the Pedro reference. Hahaha

@lawnrebel 2 года назад

He's got a sweet bike 🚲

@WoodWorker-mp2il 2 года назад

And a delicious bass

@caseysanguins9490 2 года назад

Ok, late to the game but I just learnt something. Heat the end of the pin and then use wax, like a tea light candle, melted on the by the hot pin, then pound it out.

@YouMadeMeLawn 2 года назад

12:41 Connors calling everyone to church.

@JEK 2 года назад

First Californian! Nice move with the Just For Men. No play for Mr. Grey.

@bryanfelver6125 2 года назад

In the future when removing a pin like that . You need to use a rose bug that you talked about. Heat both side up cherry red,let it cool. Once its back to normal temp. Heat both side and with the sled and a punch it will come right out. You will have a few minutes to work with it. Once the heat transfer to the pin , you have to let it cool and start back over.

@lancescott1453 2 года назад

Milwaukee 1/2” impact is your friend… and a time saver tip.

@tam1381 2 года назад

Hey Pal that pin might be tappered ? Stainless steel thread bolt not a good choice Pal.

@Earthau 2 года назад

Take it to the Pro's Connor, pay them to do it and watch what they do for next time or work on your shed because Lawn Season is coming!

@barrycavanaugh2937 2 года назад

Use a grade 8 bolt, stainless is soft.

@lawnrebel 2 года назад

Couldn't find one with full length threads Looked high and low

@barrycavanaugh2937 2 года назад

@@lawnrebel , not sure what size threads you need on that bolt. Maybe a wheel bearing removal installing tool. That setup you had was working, that flat part bending is what strained the bolt. I have a bearing tool, it utilizes a thrust bearing under the bolt. It has different sized cups and a 1/2 thick cap. Google FWD bearing removal installation tool. Was a more popular tool years ago, now they all use use unitized bearing that bolt in. Mazda, ford, Subaru still use that press in style. Good luck bud, hope you’re done the job!

@WoodWorker-mp2il 2 года назад

I’m having chest pain’s watching you swing that sledgehammer knowing there’s a better way! 🤣 good job though! 👍👍

@livetooextreme 7 месяцев назад

What's the better way?

@andyslawncareandoutdooradv 2 года назад

Great video! Sledge hammer worked well for the job

@monstercoatingsnyc Год назад

I have practically the same hook-lift just one size smaller. I'm in need of that same piston rebuild myself and my top pin was not as difficult as yours but the bottom pin is my issue now. I was thinking of drilling and tapping the pin and using the same puller myself but also using a hydraulic ram pushing on the other side or hammering while pulling as well. Let you know how it went when I'm finally done getting it removed.

@smusgrav 2 года назад

Looks cold there! I wish I had that much hair!

@bauminwi 2 года назад

I can feel your pain as you go through this buddy. Ugg.

@grass-patch 2 года назад

The pros probably use a press. I just wonder if heating while using an air hammer would have worked.

@adamsheffield4704 2 года назад

Just needed a bigger hammer. Did you ever try the rosebud? Stainless steel threads are lousy in torsion. If I don’t need the corrosion resistance I stick with carbon steel. Pin was in there good.

@leanderbarrie 2 года назад

Stainless is to brittle for those type of jobs. Beter good steel( 8.8 or 10.4) but, good job😊🤙

@mortifyd4805 2 года назад

Well now there's a dang hole in the ozone layer over Northern Utah

@519VXComanche 2 года назад

Ditch the stainless. It’s soft and galls terrible. Grade 8 steel and a good impact gun.

@farmhand3724 2 года назад

Can't wait for the "put the pin back in" video.

@the-handy-fixer 2 года назад

Always watch your wood when working on your pin.

@mubvumalibert5132 Год назад

Helpful

@shmiggz 2 года назад

Nothing like watching Connor pound his rod

@ColeSpolaric 2 года назад

It's almost like they put those threads in that pin for a reason... 🤔 Almost....

@roberthooper8883 Год назад

Why did you take the bottom pin out? You could rebuild the orings with the tube still in place couldn't you?

@HarryGraham415 2 года назад

Just pay a professional Conor 🤦🏽‍♂️ I’m all for doing things myself, but you should know where to draw the line.

@Bradannas1 2 года назад

Hey pal if the garbage business don’t work out you could always be a hair model! Your have always had one lush head hair!

@GW._. 2 года назад

Air chisel maybe?

@seminole715 2 года назад

LOL, does the carpet match the rug? Thank you for the video!

@lawnrebel 2 года назад

It's the drapes pal... Does the carpet match the drapes.. And no.... It doesn't

@Robert-ij9ih 2 года назад

Better call Andrew Camarata 😎✌️

@mrschwifty5564 2 года назад

Was about to say the same thing lol.

@sagmeister2234 2 года назад

Just a thought. Maybe try the hairspray to remove the pins.

@lawnrebel 2 года назад

Lol.. Good idea

@marshallhoux7987 2 года назад

Why not just take it to a diesel repair shop and get it done by people who have the right equipment and get it back on the road because if it isn't working it's not making money for you

@richardharwell 2 года назад

One down and 1 to go, you can do it !!!

@ngreed 2 года назад

Never fun getting pins out. Are you taking the cylinder somewhere to be rebuilt or are you doing it yourself?

@leeweber85 2 года назад

All the stress of removing the pin is giving you grey’s 😂

@boostedfools 2 года назад

I felt the frustration watching this video...

@jeffreydillner1897 2 года назад

I was in a Band named "Coupling Nuts" in 1997

@deanhaylock7187 2 года назад

its pushed in at the factory in Liquid Nitrogen...a git to get out..

@Airgunfunrich Год назад

Quite brave using a gas axe with all that product in your hair mate

@adrianocandidodasilva3417 9 месяцев назад

@mrkraymnd 2 года назад

Second - nice to see a longer vid man - I hope your well

@CP-rm7rz 2 года назад

issuing 2 (digital) violations 1. cords on the floor are a tripping hazard 2. way too much hair spray. I hope no open flames present in the Ward residence

@lawnrebel 2 года назад

Yeah... Cords.... Didn't you see my ppe?

@wayneessar7489 2 года назад

A steel driving man Lord Lord!

@corey6098 2 года назад

Love the nepolean dynamite references, is that your favorite movie? You guys speak the same! Dang it 🤣

@lawnrebel 2 года назад

my fav movies. joe dirt, nap dynamite, juraasic park , and back to the future.

@kennethcooley9917 2 года назад

@@lawnrebel Just beat it like your mother did you !!!

@thegreenandgoldlife1464 2 года назад

Yo CW props for the patience bro 🙏. Ida started cutting with that torch 🤣🤣🤣

@1suzukiryder 2 года назад

Air hammer maybe? 🤷🏽‍♂️

@lawnrebel 2 года назад

yeah an air hammer would have worked

@CHOPPER030279 2 года назад

Vote for Pedro

@krisclayton6335 2 года назад

It was the presence of duct tape that made it move.

@lawnrebel 2 года назад

It's true

@jpaterson507 2 года назад

Pound town

@lawndingo7656 2 года назад

I would have taken the truck to the shop…

@carpentrylover145 2 года назад

Some things aren't worth doing yourself

@2008fjr 2 года назад

Hey bud, I don’t claim to be an expert here, but if you hit the pin with another steel pin, you risk swelling it and making it tighter. Most likely than pin will need to be tossed out & replaced. I’ll bet the truck shops are using a press to push the pins out. Gotta give you an E for the effort though.