Repair and service tutorial Su-Kam's Fusion inverter/UPS 3.5KVA/48V 

Thank you

I have one problem with 3.5 kva sukam ( fusion ) Battery heated & charging vtg 59.90/ 60 what is actual problem battery or ups

Inverter working normal when switch on mains input current high

Hello team, I have a sukam 2.5kva 48v fusion inverter, the inverter works fine but when I switch to AC it works for short time then goes off it displays "protection mains MCB trip please check the back but at the back MCB is not tripped what could be the problem. Thanks.

My su-kam fusion 3.5kva 48volts inverter probably received a lightning strike and this spoilt its input circuitry making it to sound alarm when the ac breaker is on and the inverter mode is switched on. what can i do and how do i get parts for DIY if it requires change of PCB cards. I live in Nigeria.Thank you

Hello I have this type of sukam inverter two days ago it's overloaded and I off the inverter when I on it again the DC fuse shorted now we are in quarantine and workshops are close can you tell me what is the problem? Thanks

my inverter shows zero output load. Opening the inveter i see one black wire coming from ac output is disconnected. Please help me where to connect that.

my sukam fusion 3.5 kva works normaly on battaries but when i conect the mains it stops the output load and beeping with showing ( MCB TRIPP ) on the LCD help please

Hello sir I have a problem in that inverter it use to make alarm sound no stop

Please I have this inverter but the only issue is that it kills my batteries whenever AC main comes in

Spare parts,pcb kaha milega

Sir aap mujhe yr batay sukam op sense me kitne volt feedback di jayage mere kit 2.5kva ki hai aur ise mane kevin 5kva 48 volt me lagaya hai

Sir can you provide me this inverter microcontroller ic for sukam 48 volt 2.5 kva it show output 218 volt but wont come out microcontroller faulty gate voltege not present at 4 of 2 pin but battery charge circuit is well

Cooling fan ok but not working when invertor on condition.

Sir plz can u tell me ...R37 resistance value...it's urgent..plz

Sirji hamara inverter, same apka jaise lekin abhi beep sound awas karta. Hamko bataye keisa ye problem solve karta

hamre pas hy cantrol card kharab hy ye kisa mille gha im pakistan

I'm facing a problem with fusion 2.5 kva. the screen is showing over temperature protection. please make a video to help me to fix it. thanks.

Please I am using this inverter and after sometime lcd display an error like mcb trip check back panel and reset. It is happening when AC plugin only but not in battery backup mode without AC mains.

The system was switched off 3 month back.now it is not going on.

Sir yeh PCB kitna ka ata hai

Where can we get this 3.5kva PCB board?

Please help. I require front LCD for this unit. I cannot find any suppliers in South Africa. Inverter is working 100%, but LCD is just black blocks always. Can you assist PLEASE??

بهایی هماری سوکام 48V 3.5kw وو 44v پر بند هوتاهی کیا کرو

Pcv kha milegi

please upload new videos about fusion series and collosal series...i need to know every single detail about these products thanks a lot

Can you help please

I need a new PCB board for my SU-Kam Inverter 3.5kva , Please help with authorized service supplier for the same .

can you download that video by arabic language please . .

Su kam 3.5 fusion shok sirkit problem

Bip problem

display Nahin tu kya kar raha hai

bhai pcb to koibhi change kar sakta he isme bdadi bat kya he . pcb ke fault ko solv karke dikhana mangta tha to bohot maja aata . faltu video banaya he . timepass video .

Card.avblvel