Тёмный
No video :(

Repair or Replace my Dinghy? | Small Boat Restoration | Ultra Lite Dinghy Pt 2 (Ep72) 

MotorCity Boat Werks
Подписаться 11 тыс.
Просмотров 1,3 тыс.
50% 1

Now that I have dinghy davits on my trawler, there's problems with my dinghy row boat. The dinghy needs a certain lifting point for rigging dinghy davits to raise it. Every couple of weeks I post a boat building or boat repair video to document various boat projects, sailboat restorations, or boat repairs. And when all else fails, I tell stories of boat motivation.
‪@SVSeeker‬ ‪@boatworkstoday‬ ‪@sailingavocet‬ ‪@SailLife‬ ‪@WayneTheBoatGuy‬ ‪@TheDuracellProject‬ ‪@LifeOnTheHulls‬ ‪@ParlayRevival‬ ‪@DistantShoresTV‬ ‪@RANSailing‬ ‪@lahakai‬ ‪@SixPointsWoodWorks‬ ‪@FishBumpTV‬ ‪@ArcticSeaCamel‬ ‪@ParlayRevival‬ ‪@SailingUma‬ ‪@lahakai‬ ‪@DistantShoresTV‬ ‪@WayneTheBoatGuy‬
**MotorCity Boat Werks has no sponsors and receives no compensation from any of the brands featured or recommended.
However, there may be compensation from the use of Amazon affiliate links below.**
Equipment featured this episode:
3m 4200
amzn.to/3ICtgsu
Ring Bolts 10mm 3/8
amzn.to/3x5rq0w
Be sure to like and subscribe.
/ motorcityboatwerks
Questions or comments can can be submitted via the comments section or at:
📧motorcityboatwe...
Donations:
www.paypal.com...
Join The Werkers (fan club):
/ motorcityboatwerks
#boatprojects #boatrefit #boatrestoration #boatbuilding #trawlervlog #trawler #boatlife #sailboatrestoration #sailboatrefit #boatworkstoday #waverover #motorcityboatwerks #saillife #boatbuilding #boatprojects
My videos are similar to sailboat and boat restoration videos like Boat Works Today; My videos are similar to boat project videos like Boat Works Today; Artic SeaCamel; RAN Sailing; Project Brupeg; Sampson Boat Co; The Duracell Project; Project Duracell; Tula's Endless Summer; Travels with Geordie; SV Seeker; Danger Marine; My First Boat; Sailing Dawn Hunters; Seeking Seas; Sailing Flying Coney; AYO Fishing; Peter Slack; Sail Life; Sailing Millenial Falcon: Wilding Sailing; Life on the Hulls; Sailing Wave Rover; SV Tapatya; LOJO Fishing; Sailing Wave Rover; Angry Mack; Sailing Lahakai; Scho and Jo; Aboard Lady Hawk; FishBump Tv
BoatWerks Theme: "Early Retirement Start" by Ryan Muns Eyes on the Moon Studios

Опубликовано:

 

6 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 35   
@davetowz
@davetowz 5 месяцев назад
I love my Milwaukee cordless ratchet for fasteners in areas like that. Glad to see the dinghy sticking around.
@motorcityboatwerks
@motorcityboatwerks 5 месяцев назад
Sadly Dave there was no room for the cordless socket driver ☹️ I earned that degree at day class for the Busted Knuckle University.
@jefersonscholze9445
@jefersonscholze9445 5 месяцев назад
Hi Joe, it's good to start my day with your projects. Thanks again to share your experience with boat restoration. Nice weekend.
@motorcityboatwerks
@motorcityboatwerks 5 месяцев назад
Thanks for the comment Jeferson👍😁
@carlthor91
@carlthor91 5 месяцев назад
Agree on checking date of manufacture. The Granger store that I deal with has a notice on the Loctite shelf, 'check the best before date '.
@motorcityboatwerks
@motorcityboatwerks 5 месяцев назад
😁👍thanks Carl welcome to the Boat Werks. Be sure to subscribe
@907T
@907T 5 месяцев назад
Good work Joe!
@motorcityboatwerks
@motorcityboatwerks 5 месяцев назад
👍😁
@joecole5052
@joecole5052 4 месяца назад
Fix cheek blocks on either side of the davits and you can get rid of the top double block from each davit. That will give you three or four extra inches and, as a bonus, you should have a smoother action on the rope. I'ld also think about some drainage for the dinghy. If it is left on the davits whilst you are away from the boat some heavy rain could cause real problems.
@motorcityboatwerks
@motorcityboatwerks 4 месяца назад
Brilliant 🤓
@bblod4896
@bblod4896 5 месяцев назад
Yes, all adhesives and sealants have have a limited life. I've learned that the hard way. Purchasing stuff on sale then finding out later the sealants such as silicon, even when never opened, will not set up. I no longer purchase adhesives or sealants to stock for the future. Thanks for the tip. ⚓
@motorcityboatwerks
@motorcityboatwerks 5 месяцев назад
😁👍
@russellmurphy8111
@russellmurphy8111 5 месяцев назад
Nice work and determination!!!
@motorcityboatwerks
@motorcityboatwerks 5 месяцев назад
Thanks Russell👍😁
@mikeyadrick5154
@mikeyadrick5154 5 месяцев назад
YOU CAN put the lift eyes thru the bottom of the dinghy-----thats wherre your Old Friend, 3M 5200 comes into play. Just like your underwater thru-hulls. Been using this product for over 50 yrs. Contact me if you want more info, always ready to talk BOATS!!-----Mikey, belfair, Wa
@motorcityboatwerks
@motorcityboatwerks 5 месяцев назад
😂🤣Yeah I don’t think so. 🐙Who’s going to pump out the dinghy while I’m rowing? You? Stationary lifting points receive alot more force than thru-hole fittings. But thank for the comment and be sure to subscribe 😁👍
@pforbom1844
@pforbom1844 5 месяцев назад
An other solution is that you could reposition the block pulleys to between the cleat and the pulley at the end of the davit. This would solve the vertical clearance issue.
@motorcityboatwerks
@motorcityboatwerks 5 месяцев назад
This is an interesting idea 🤔
@markgallagher1376
@markgallagher1376 5 месяцев назад
Nice job. That is right we’re I would have put them too. How much weight did the coosa backing and new fiberglass add to the dinghy?
@motorcityboatwerks
@motorcityboatwerks 5 месяцев назад
Great questions Mark. I cover most of the details in the original build video. The bare fiberglass hull was 55lbs and the finished dinghy with the compartments and the fittings and rub rail 78lbs.
@kandongeiro
@kandongeiro 5 месяцев назад
Good tip but Amazon has a return policy )at least here in Europe)
@motorcityboatwerks
@motorcityboatwerks 5 месяцев назад
If you buy through the affiliate link it goes towards the channel and costs you nothing 😁👍
@vincentdsnt
@vincentdsnt 5 месяцев назад
If you locate the rings in the bottom would that make the dinghy rock from being top heavy now? But if the rings are as close to the sides of the boat that may help.
@motorcityboatwerks
@motorcityboatwerks 5 месяцев назад
Right, no matter what the dinghy must be secured to the davit to reduce swaying.
@vincentdsnt
@vincentdsnt 5 месяцев назад
Okay is that how it works? I never used davits, so yeah if it gets tight to the davit cool ! Carry on Joe. Great Job.@@motorcityboatwerks
@motorcityboatwerks
@motorcityboatwerks 5 месяцев назад
😎
@motorcityboatwerks
@motorcityboatwerks 10 дней назад
Seems to be working excellent 👍😁
@Mvpaladin
@Mvpaladin 5 месяцев назад
Glad you kept the dinghy, it fits the theme of the pocket trawler perfectly. You have seahorses in your shop???
@motorcityboatwerks
@motorcityboatwerks 5 месяцев назад
That’s right 😉Every episode I intentionally make a mistake to see if the viewers are paying attention. And this week MV Paladin 🐙is the most-best-paying-attention viewer 😂🤣
@Mvpaladin
@Mvpaladin 5 месяцев назад
Nice!!
@motorcityboatwerks
@motorcityboatwerks 5 месяцев назад
😁
@cferinga1
@cferinga1 5 месяцев назад
Where are you located?
@motorcityboatwerks
@motorcityboatwerks 5 месяцев назад
Of course MotorCity Boat Werks is located in Detroit 😎Be sure to like and subscribe--and add it to your playlist👍😁
@cferinga1
@cferinga1 5 месяцев назад
Of course. I live in Grosse Pointe... and was wondering where around Detroit you were. @@motorcityboatwerks
@motorcityboatwerks
@motorcityboatwerks 5 месяцев назад
😁👍
Далее
Butch REACT to Creative way to fix damaged tile!
00:46
Просмотров 858 тыс.
A Huge Week...
22:01
Просмотров 33 тыс.
Varnishing (the basics) - Boat Building Sessions
3:03