No video :(

Repair Ridge Shingle Wind Damage,Why they blew off? and How-to install

Подписаться 7 тыс.

Просмотров 50 тыс.

50% 1

Roofing done the right way! Using a standard 3-tab shingle as your #ridge_shingle is optional but there are a few things you should know! In this video we are demonstrating the most #common_mistakes done by roofers when installing ridge shingles and what you can do to avoid these mistakes. These mistakes mostly lead to wind damage or missing ridge shingles so if you'd like to learn how to properly install ridge shingles and what you can do to avoid roofing problems stick around and watch this video because this video is guaranteed to give you some valuable information.
Check out our channel #AurumRoofing and remember to like and subscribe for all your roofing needs. All roofing how-to requests are welcomed.
Visit us online at- aurumroofing.com
Follow us on:
Instagram- / aurumroofing
Linkedin- / aurum-roofing-aa50791a2
Facebook- / aurumroofing
Twitter- / aurumroofing
Tik-Tok- vm.tiktok.com/...
You could support our Channel by a Simple press of a button.
**Remember to Like and Subscribe**
All donations are welcomed at: www.paypal.me/...
Here are a few of our latest informative Roofing Videos-
--3 Attic Venting Tips, Instant attic Cool Down • 3 Ways to Cool your at...
--14in Velux Sun Tunnel How-To install • How-To Install 14" Vel...
---Ridge Vent Install DIY Video- • How-To Install Ridge V...
---D.I.Y Prevent Roof Damage a.k.a Wind Damage- • Pflugerville,Tx this r...
--12 Easy steps Wind Damage Roof Repair • Wind Damage? (Easy Ste...
---Roof Eaves Explained (right way)- • Roof Eaves Explained (...
Aurum Roofing is a Full Service Residential and Commercial Roof Repair and Replacement Company. Serving Williamson, Travis and Surrounding Counties. 5 Star Rated with an Excellent Track Record for Customer Satisfaction. We specialize in installation of all roof types and materials, which include Asphalt Shingle, Tile, Metal and TPO Flat Roofing. We offer Free In-Home Consultations and Estimates backed with our 100% Customer Satisfaction Guarantee. Call us today for your Roofing Repair or Roof Replacement needs, we look forward to working with you! If you live in the Central Texas Area and would like more information about our services please feel free to call us at (512)284-5239

Опубликовано:

16 июл 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 71

@nmsidewinder Месяц назад

Great tip and it makes a lot of sense. I have to repair-replace 5 of them. We just had a horrific wind storm that blew shingles off the roof. I'll have to repair the roof at night because during the day it's 115 to 119 degrees outside and the roof temperature is 178 degrees. Thanks for the great video.

@justingregware Год назад

We were impacted by Hurricane Ian. Fortunately we only lost a handful of hip and ridge shingles. Watched countless videos on this subject, and this one was the most helpful. Totally gave me the confidence to DIY this repair Thanks.

@AurumRoofing Год назад

That's great! I'm glad you found this video helpful.

@stevenb8340 3 года назад

3 cuts instead of 6 and more nailing surface makes sense to me---thankyou---i just had my 70 ft. of ridge shingles blow off of my ridge vent in 40 mph winds and roof is only 3 years old----they cut the corners and over drove the nails--subscribed

@AurumRoofing 3 года назад

Thank you for the comment glad it helped. Btw. It's only 2 cuts not 3. 2 cuts can make three ridge tabs. :)

@stevenb8340 3 года назад

@@AurumRoofing and math was my supposed strong point lol

@AurumRoofing 3 года назад

😁1 bld of 3 tab shingle can cover up to 30 ft of ridge. Just an FYI.

@rydercatlege 2 года назад

Thank you so much for taking your time and helping people like me. You just saved me $250 that I did not have.

@abishaiowen9202 16 дней назад

Great video, very informative. Thank you very much!

@drewbrown3794 2 года назад

Great video. Very informative. Thank you for saving me quite a bit of cash on some needed repairs!

@AurumRoofing 2 года назад

Absolutely!

@spiderbrotan8752 2 года назад

Great job explaining and visual. Shows you take pride in your work

@georgebecht6357 Год назад

Thank you! I lost some ridge shingles during hurricane Ian on a roof installed in 2016 with only 2 nails per shingle. Now I will repair it the "right way".

@MrMelville1968 2 года назад

Excellent advice and you're completely correct! Keep up the great work 👍

@kathyweigelhi-lophotovideo2984 3 года назад

Thanks very much. Nice to see the details so at least I can tell when the roofers are doing it correctly.

@hight42 3 месяца назад

Bet you're a fine carpenter, too! I come from a long line of 'em, never heard of dog-earing ridge shingles in all my life, & certainly wasn't taught that by my elder craftsmen. Reminder: Precision cutting of the 3-tab into even 1/3s is also an option, with little to no edge trimming afterward.

@garysanchez4123 3 года назад

🤯 Bro, this is BEAST! Exactly the advice that I was searching for. My roof lost like 5 sloped ridge shingles after Hurricane Delta, and I can't get anyone to do the repair right now. I may have to do the repair myself, I'm just concerned about the steep slope of the roof. Not sure how to crawl up there and avoid sliding off 😅. I appreciate your help brotha.

@AurumRoofing 3 года назад

Thank you very much for your comment! Installing the ridge shingle in a squared shape is key. Remember, if you have any questions or concerns please don't hesitate to contact us for free advise. Good luck!

@wilmoney4201 2 года назад

Just ran across this video....had to replace some shingles this morning and realized a couple that need replacing ran under a ridge...so I did not replace the...bur after watching this, I think I can do it...thanks..now what's the best way to get back on the ladder when coming down

@davidlandivar7710 2 года назад

Excellent channel because you are obviously not just a roofer but a common sense/ smart person. Hope you continue to ad yo your channel. Idea topics: ARCHITECTURAL shingle repair and how they tend to leak, how roof painting can be good or bad or how to use it to avoid problems, how to replace rafters that are damaged. Thank you !

@AurumRoofing 2 года назад

Thank you very much for your kind words. We will continue to add to our channel shorty just we've been extremely busy. Thank you!

@fidelramoscastro3153 Год назад

That is an excellent explanation. Thank you for your professional tip.

@quadzeroo Год назад

Excellent video. Was wondering what the point was having the corners cut in the first place, thank you for the tips and info.

@AurumRoofing Год назад

Your welcome.

@matthewmoorecichlids2323 3 года назад

Subbed just because of this tip. Thank you.

@alotl1kevegas860 10 месяцев назад

Great video! Very informative.

@LTDan-pk3mx 8 месяцев назад

Awesome Videos!! I have a three dollar question for you.. I built two dormers on a 12 12 pitch, one going north and one going south.. I joined the ridge boards at the same elevation as the original ridge.. now I am having a hard time trying to figure out how to do the ridge shingles?? I am installing the rolled ridge vent.. Thanks ahead of time for your help!

@ryansmith6917 Год назад

Thank you! Very good tutorial

@marcosmunoz1663 9 месяцев назад

Thanks

@josedavidrodriguez 3 года назад

Great video

@wesbrewer1791 Год назад

Great tip! Ty

@AurumRoofing Год назад

Your welcome.

@joegurnow9011 2 года назад

Great Tip

@mr.scallon9122 2 года назад

Good Tip man!

@somebodymcperson 2 дня назад

If that corner sticks out like that it can catch water which would run under the shingle and into the roof.

@drpcustomhomes3020 10 месяцев назад

exactly bro

@Synchrimedia 2 года назад

very helpful. thanks!

@AurumRoofing 2 года назад

Your welcome!

@user-po1wj1bo6n 2 года назад

Just watch your excellent video thanks

@808airgunsbackyardaz6 Год назад

Good rip

@Z-Ack 2 года назад

My cap was installed fine i think, except they used an extra shingle at the top like an extra wide deal then the ridge shingle sits on that but is about 2" shorter than that one below it. Which were all loose and i could stick a bar under the entire length. Somehow it only leaked on one side.. had to rip the whole thing up and put down paper and new cap.. i overdid it though.. used henry's under both sides the whole length.. next installers not gonna be a happy camper come tearout.. better than some ive seen though. Had one other month where whoever installed the architectural style used 3" 10p nails for the entire thing. Dude hade to have spent a few hundred on nails alone.. decking had to be replaced because you couldnt nail in it with all of those big ass nails.. the underside of the attic looked like some torture stuff..

@user-fu7mu2bs5y 9 месяцев назад

What's the best dimension for the square?

@tovarusperkins3955 2 года назад

Great info

@vineshpatel9060 3 года назад

Great video super helpful

@AurumRoofing 3 года назад

Thank you. If you liked this video make sure you check out our other how to Roofing video's. They are just as good if not better🤙

@gafferhabib5793 7 месяцев назад

Very nice tutorial. Question- how big a nail you use for those ridge? 1-1/2” or 2”?

@AurumRoofing 7 месяцев назад

1-1/2" nails are ideal.

@gafferhabib5793 7 месяцев назад

@@AurumRoofingI went to buy the ridge shingles at Lowes and I found them to be brittle at least the ones I found open. Your tutorial 3 sheet shingles looks very flexible. Where do you get them? I need only 2/3 -3sheet ridge. If I get the entire bundle would they be brittle in the garage? Which city/state do you do your work? Do you do roof installation work or just teach?

@sonsofthegalaxypt1pt223 Год назад

Look wavy

@billdemaineiii6979 Год назад

Thanks!

@AurumRoofing Год назад

Your welcome!

@AurumRoofing Год назад

No. While esthetics is important a dependable and wind tight roof is more important. It's a lot easier keeping a straight line with the corners cut. Not cutting the corners does take a little more time.

@uncled39 Год назад

What's wrong with using slates or clay tiles? In England roofing felt is used for shed roofs, not houses.

@ivanishkov4999 Год назад

Hey bro. I’m finishing up my roof now. I glued and liquid flashed each shingle nailed up to a ridge and glued and liquid flashed the crap out of the valleys. (Florida hurricane zone) Maybe I wasted a bunch of time, but I didn’t make anything worse, did I? I was thinking maybe you want it to not all be monolithically sealed with tar. I used like 5 buckets.

@AurumRoofing Год назад

I problem with doing this is that no matter what, no knowone can ever stop water or condensation from coming through the shingles or flashing (especially where the shingles meet with one another). The trick is to know how to let the water out. Doing something like this can cause trapped puddles between the shingles because the water has nowhere to go, if it's a steep roof, you may be able to get away with this because the force of gravity is in your favor but for flatter roofs under a 6/12 pitch you may have problems. This is why we never use those spray "sealers" from t.v commercials because it's only traps the water that will eventually get through. Good luck.

@user-kx6wt7ql3y 11 месяцев назад

is there any reason why trhese cannot be sealed down with mastic adhesive?

@AurumRoofing 11 месяцев назад

That can be an option, I don't see why not. Just make sure you still follow the nailing instructions. Thanks for the comment!

@AmateurJoeski Год назад

Will roof leak if a couple hip shingles blow off ?

@AurumRoofing Год назад

Yes, It's possible.

@rickythompson2374 3 года назад

We have always cut our coners and never had any problem with it if you cut it straight it better be straight or it will look crappy THOMPSON ROOFING.

@AurumRoofing 3 года назад

Thanks for your input 👍

@jayybayy5364 3 года назад

Better to "Look crappy" than to let ur roof rip off and leak but what do i no

@jayybayy5364 3 года назад

Ricky this guy posted a video you can sit there and not waste any of our time commenting were all here to watch this guy not you and if u have 35 years than why are you here!

@jonnysabueso2688 Год назад

Nice! How much did you charge for thus repair? I have something identical.

@AurumRoofing Год назад

Linear footage and roof pitch have a lot to do with price here. Depending on how many feet you have will depend on what a roofing company may charge you. Unfortunately, this is a very difficult question to answer. I would recommend you get 3 estimates before making a decision. Thank you for your comment.

@jonnysabueso2688 Год назад

@@AurumRoofing I'm the one doing the work and quoting my customer. Low pitch one story 6 ft of hip cap

@jonnysabueso2688 Год назад

@@AurumRoofing thank you for the reply!

@AurumRoofing Год назад

Our minimum charge is $325 (labor and materials). This sounds like something we might consider a minimum charge.

@natewilliams7025 2 года назад

Actually you just cut too much off and nailed above the tar line

@Relevantminded 11 месяцев назад

I cut my corners off but still nail 2 nails per side and have never had this issue. Cutting those corners helps deflect water away from the hip joint underneath the capping. I've done it this way for over 25 yrs and never had any caps blow off. Cutting off the exposed parts later after straight cutting your caps gives risk to cutting too hard and end up cutting into the shingles.