I did that for a B&S Lawn Tractor Engine. I soaked the rag in oil first. The plug was horizontal on the engine. Flushed the Cylinder out with Charcoal Lighter Fluid. Didn’t have any problems with this fix. However, had other fasteners constantly coming loose. Muffler Pipe also loosened and stripped out its threads. Had to go with a different type, bolt on muffler. Sold it to someone as I needed a larger tractor. They bent the engine shaft by slamming into a Snow bank without hitting the clutch.
Bang, minta rekomen rumah kopling untuk revo fit yg pakai per kopling ?. Klo aslinya kan pakai per plat. Jadi rencana mau ganti yg pakai per... Terimakasih sebelumnya.
It shouldn't. I would have used some thread locker specific to this application. It would prevent it from getting stuck to the plug next service. The real big issue with this repair is that the rag he shoved into the bore is not going to collect all the shavings indefinitely. This would be acceptable to an engine you intended to replace soon and you just want to get a little more out of it. If it's an engine you intended to use long term, better off doing it the right way and pull the head.
Kang mau nanya motor ane scoopy 2018 di gass poll keluar asap hitam tipis dan berbekas di knalpot itu rusak nya apa ya , dan cara ngilangin asap hitam nya kya gimana apa harus bongkar mesin atau engga , mohon di bales kang🙏🙏🙏
Bos,,, Mau nanya ni ,,, motor saya Vario 125 ,CBS , Itu berebet g ada tenaga , udah di ganti dinamo yg di dlm tangki bahan bakar , masih brebet aja Trus suaranya ada suara etek etek ,, trus baut untuk buka oli di mana ya ,, saya mau ganti oli sendiri ,, Trimakasih pak boossku
Maaf mau tanya nih,,,saya baru buka usaha bengkel, kalo misal saya cuma beli recoil nya aja, alat2 yg lainnya itu bisa saya buat sendiri, nah tap untuk masukin recoil nya ukuran berapa ya? Yg buat bebek, sama 2tak , kan aslinya m10x1 dan m14x1.25, nah yg buat masukin recoil nya pakai tap berapa ya?