My stapler is completely different but your video still gave me the "jist" of how to reconnect my spring to that little metal piece and voilà, I'm back in business! Thanks a bunch!
Yes its really true, I haven't found any help in german language. I have seen your manual and I have repaired my "Tacker" and he works. Thank you so much.
Please help me because i'm just using stapler after hitting the middle part on hard surface so that to use it again' can this procedure helps on my issue?
It is too tough to say which procedure helps on your issue without seeing your stapler. Upper part ,middle part and lower part should be lined so the pusher of upper part go through the middle part and hit the pins & the pin pusher should be easy and moveable (in middle part) so that pin cartage go ahead for staples. *Take care*
It is too tough to say which procedure helps on your issue without seeing your stapler. Isolate the broken part. Fixed it on a small wood board by drilling two holes. And fix the other two part by nail (like 'L' shap) . Remember upper two part must go through by pushing stick. *Take care*
@@ignitedidea3711 unfortunately I think the broken part is on the stapler. Compared it with a freshly bought one from the same series. I think I broke the grip that is holding it in place. At least I think I broke half of it
