Repairing a KitchenAid Stand Mixer

Подписаться 15 тыс.

Просмотров 30 тыс.

50% 1

I got this KitchenAid Professional 5 Plus (KV25G0XER) stand mixer for free. The previous owner said this mixer loses power and makes a grinding noise under load. The transmission housing was cracked, a sleeve bearing was broken, and the worm gear was chewed up. See the links below for the parts and tools I used:
Snap Ring Pliers:
amzn.to/3eHsQ5l (affiliate*)
Food Grade Grease:
amzn.to/3OMftAN (affiliate*)
Transmission Housing (8212396):
amzn.to/3NHja9T (affiliate*)
Worm Gear (WP9709231):
amzn.to/3RdKr6y (affiliate*)
Front Sleeve Bearing (WPW10170080):
amzn.to/3yKjfoJ (affiliate*)
Worm Follower Gear (W11086780):
amzn.to/3AwwlaK (affiliate*)
Beveled & Attachment Gears (W11192795):
amzn.to/3RgIQgk (affiliate*)
*Purchasing from these Amazon affiliate links earns my channel a small commission. Think of it as a tip that doesn't cost you anything. Thanks for the support!

Хобби

Опубликовано:

12 июл 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 55

@Mikeattempts 2 года назад

Snap Ring Pliers: amzn.to/3eHsQ5l (affiliate*) Food Grade Grease: amzn.to/3OMftAN (affiliate*) Transmission Housing (8212396): amzn.to/3NHja9T (affiliate*) Worm Gear (WP9709231): amzn.to/3RdKr6y (affiliate*) Front Sleeve Bearing (WPW10170080): amzn.to/3yKjfoJ (affiliate*) Worm Follower Gear (W11086780): amzn.to/3AwwlaK (affiliate*) Beveled & Attachment Gears (W11192795): amzn.to/3RgIQgk (affiliate*) *Purchasing from these Amazon affiliate links earns my channel a small commission. Think of it as a tip that doesn't cost you anything. Thanks for the support!

@melissamurphy658 7 месяцев назад

One of the best ones I watched. Quick to the point.

@Mikeattempts 7 месяцев назад

Thanks, I appreciate the feedback! :)

@jeffreysmith7924 5 месяцев назад

Just rebuilt mine, thank you so much for the tutorial. Made it very easy!

@Mikeattempts 5 месяцев назад

That's great, I'm glad the video was helpful, thanks for the comment! :)

@funstuffonthenet5573 Год назад

Mine isn't even broken but I will remember Mike's pro repair tips for the future!

@Mikeattempts Год назад

Hahaha, I appreciate it, thanks for watching!

@WillNiels128 2 месяца назад

Already an amazing video, I'm not even halfway through

@Mikeattempts 2 месяца назад

Thank you, I appreciate it! :)

@abeautifulmessss Год назад

Mike, great video! My mixer has sounded awful for the last few years, but I don't know where to take it in to get it looked at. Plus, not sure I want to drop a bunch of cash on fixing it. This video has given me the confidence to pop it open and take a look myself. Hopeful the damage is minimal and it just need some new grease!! Thanks again!

@Mikeattempts Год назад

Thanks! I spent $75 repairing this mixer but, to me, it was worth it since this model retails for $450 new. It's normal for the gears to wear out over time. It's nice to have the option to replace the gears and then the mixer is good as new rather than having to buy a new one. My guess is that the sound you're hearing is the worn gears grinding together. Thanks for the comment, let me know how it goes!

@wniner8194 2 года назад

Good video. Should help many folks who are reluctant to open it up!

@Mikeattempts 2 года назад

Thanks, I appreciate the positive feedback!

@andrearoosth564 9 месяцев назад

WOW - BEAUTIFUL WORK!

@Mikeattempts 9 месяцев назад

Thanks, I appreciate it! :)

@litchfieldt 4 дня назад

Great videos! Some information about your sourcing of parts would be appreciated. How you found parts diagrams, part numbers, whether you could source online or had to call the manufacturer....etc.

@Mikeattempts 4 дня назад

Thanks! I try to put those type of details in the video description, along with links to the parts and tools I used in the video.

@bawbymann Год назад

Awesome job man..thanks!

@Mikeattempts Год назад

I appreciate it, thanks for watching! :)

@user-xz5wb9kl7i 7 месяцев назад

Great video THANKS for doing it

@Mikeattempts 7 месяцев назад

Thanks for watching it! :)

@ckra2001 Месяц назад

Cool, but I hope that top bearing in the transmission "accidentally" got some grease while assembly.

@Mikeattempts Месяц назад

Yeah, I thought about the same thing while editing the video. There was grease on the end of the shaft, but I should have squired some into the top of the housing.

@osvaldoumana4494 6 месяцев назад

great video..... thanks for the detail images and info...!!!!! now... let see if I can do the same... LOL

@Mikeattempts 6 месяцев назад

You should have no problem getting it fixed up, let me know how it goes! Thanks for the comment. :)

@anthonynguyen2867 11 месяцев назад

Hi Mike, it's great video. Where can i order the parts and find part numbers? 😊

@Mikeattempts 11 месяцев назад

There should be a sticker on the bottom of your mixer with the exact model number. Now you can find a parts diagram for your model which will include all part numbers. See my video description for the part numbers I used and links to buy 'em. Amazon and eBay are my go-to sources for all replacement parts but there are other such as daytonapplianceparts.com .

@jackiemariani6794 2 месяца назад

I removed the snap ring (1:45) but I can’t get the beveled gear to budge. Is there something else holding it on? (1:51) I’ve even tried using a screwdriver on her knees to push it up, but there is definitely something mechanical holding it because it requires a lot of force and it’s not moving

@Mikeattempts 2 месяца назад

Hmmm... the snap ring should be the only thing keeping the bevel gear from sliding up the shaft. You could try holding the mixer rod below still with one hand while grabbing the sides of the gear with a pair of adjustable channel lock pliers to see if you can just get the gear to budge a hair in both directions. That might be enough to free it up so it'll come off. Let me know how it goes!

@Laevatein9521 10 месяцев назад

There is a lot of play in my worm gear (moves backwards and forwards) which translates to a lot of movement in the planetary. Would that be caused by the teeth being worn?

@Mikeattempts 10 месяцев назад

I'm no pro but, if all of the gear teeth look good and uniform, the bronze bushings on the ends of the worm gear could be worn out or chipped which is allowing the excess movement.

@willtaylor1395 Год назад

thank you mine dose the same thing now i goto go find the parts

@Mikeattempts Год назад

I have some part links in the video description that might help. Thanks for watching!

@rp.aguilera Месяц назад

I can't remove that pin and you make it look so easy!! I am so frustrated !!!

@Mikeattempts Месяц назад

Try pushing up on the rod where you connect the mixing attachments to be sure the pin isn't pinched against the top of the larger worm follower gear.

@rp.aguilera Месяц назад

@@Mikeattempts I did try that, the pin moves a bit to each side, but it's stuck. i will keep trying tho!

@Mikeattempts Месяц назад

@@rp.aguilera You could try tapping the end of the pin with a punch or nail. Let me know how it goes!

@greenbra1n 10 месяцев назад

What did you use to clean the grease?

@Mikeattempts 10 месяцев назад

After removing as much old grease as I could with a chopstick and a wooden grill skewer, I just wiped out the rest with a dry rag.

@Schmidt1942 10 месяцев назад

There's nothing like lubing up the shaft and sliding it up the hole.

@Mikeattempts 10 месяцев назад

Hell yeah! ;)

@seemakiran4798 11 месяцев назад

Mike, I got a new mixer but it stops after few seconds. What might be the issue?

@Mikeattempts 11 месяцев назад

Is it brand new? If so, you should call Kitchenaid support ASAP so they can fix or replace it. If it's not brand new, it's hard to know for sure. I'm no pro but maybe it's the switch or possibly even the motor.

@eileenhammond8989 9 месяцев назад

Great video. I was grinding beef and must not have seated the attachment well. The meat grinding attachment flew off, and the shiny silver thing that you stick the attachment in turned so that the opening where you screw in the set screw is no longer aligned with it so now I can’t use any of the attachments. Any thoughts on how to fix?

@Mikeattempts 9 месяцев назад

I'm no pro but, if you take off the top cover, you should be able to pop that collar out. Then you can reinsert it, so the set screw lines up with the hole again.

@eileenhammond8989 9 месяцев назад

Thanks, Mike! I’ll try it.

@stevenyost 7 месяцев назад

My stand mixer is making a piping noise can you show what that possible be?

@Mikeattempts 7 месяцев назад

I'm no pro but the gears wear down over time, so the popping sound is probably the teeth slipping.

@stevenyost 7 месяцев назад

@@Mikeattempts ok this is my 2 kitchen aid 1st was a tilt this one right from the get go was louder it is now 14 months old and this evening while making pizza dough it started this I could not figure out how to open my mothers (I took band stew off but it didn’t move( hers 30 years old back when Hobart owned them) probably grease and grim) I will open this up and take a look thank you.