Good soldering iron like the Hakko, Goot etc with temperature control, good bits makes it possible. We in India know only the Solderon brand. There is something called low melt solder which eases the melting process too. This low melt soldering lead is different to what we generally use.
I understand that your device is designed for computer repair services, but you could think, even in your interest, to widen the target of buyers by creating a low price subscription for the reset function useful for the hobbyist, but not with the professional, e.g. 1 reset for month (or 1 every two months) ? As far as I understand it is only a matter of software (you do not have hardware expenses to provide this service), so it is highly scalable, which for you means pure gain if the offer does not affect purchases by professionals. I tell you this because the product is very attractive to us nerds, but the professional subscription is a big deterrent . The 10 days of free reset are a step on the right way, but a bit anxious and in any case does not justify the expence. Good work!
@@nipembedded9976 Still, You need to found out a "Personal License" which give a certain count, lets say 10 or 30. That will make us interested in buing the hardware. What "other Software" cost is not so relewant, because we will not buy that software eighter.
Fratilor, nici nu m-am asteptat ca peste Prut si mai ales la Iasi, unde studiaza mai multi Basarabeni, exista baieti talentati sa creeze astfel de utilaje.... Respect!!! Faceti un instructaj si in limba Romana va rog. Va salut din Republica Moldova. Multumesc.
Multumim pentru gandurile bune. Vom incerca sa facem si in limba romana. Oferim suport in limba romana si limba engleza pe cea mai mare comunitate de reparat baterii de laptopuri: www.laptopu.ro/community
NLBA1 a nice tool but Insane prices. 349$ + chip programmer licens 249$ pr. year. A new battery usually cost 25-40$. Are there any other cheaper alternatives or DIY build projets that can do the same?
The best programming trick: discharge in Windows 10x, and discharge once in Bios. When the battery becomes stronger by repeatedly doing this, new performance and energy saving features turn on, they are off by default, so it is good to do it with brand new laptops, too. When you sometimes use devices with full lcd backlight and full power, a little coil deliberately discharges to enhance the battery. Same with phones and power banks. The coil turns on using legal Sim card for net once.
hy, i ve replaced my asus a53s battery cells with higher cap ones. but battery life still sucks and each cell wont cahrge more than 4v. i don thave than fancy device, is tehre anything i can do to tell battery taht bigger cells are in?
I own one. And want to use this more often. But its subscription based pricing is cost prohibitive. And we need to reset modern chips, with modern technology. Not these 10+ year old laptop batteries in this video. We need to reset DJI battery chips, Ultrabook, Notebook, Tablets, iPads, iPhones... type chips, with flat non 18650 batteries. In short..and modern BMS chip. Make this open source. Remove the subscription model. Make this a killer tool in the right to repair movement!
NLBA1 can reset the most modern and custom chips on the market too like BQ40ZXX, even the most complicated chip to unseal BQ30ZXX with dynamic SHA1 password is also supported, all versions of the custom Apple chip BQ20Z451 and is currently working on adding DJI chips. Yes of course it is subscription based. Do you want it for free? You must be joking right?
We repairing 2019, 2020 year built slim-design batteries with latest crypto-technologies chips using NLBA1 subscription. It Does support these, just check the License description. And its really most cost-effective solution on the market, just compare with similar products with $1000 yearly subscription. WTF they should make it for free??? They invested tons of bucks in developing. Create the same product and sell it for free!))..
I need a DJI drone to have some flights this summer, I have contacted the DJI official store and I was very surprised that they asked me pay for the drone. What is this, why did they ask me to pay for it ? please help me to understand... I am totally confused.
@@nipembedded9976 I paid for the NLBA1 device. I only have issue with the recent software subscription requirement you added (after I purchased the NLBA1). As for DJI analogy. You buy the drone hardware, and the updates are free. I paid for your box. I was just shocked you migrated to a subscription model. I'm not asking to give away the box for free. Just ditch the subscription model.
@@cognetic I don't know what NIB device you bought and you have such ridiculous problems. If you are referring to my NLBA1 Laptop Battery Analyzer then I am really shocked that you still did not understand what you have paid for. You paid for the NLBA1 Laptop Battery Analyzer which is an Analyzer and all Analyzer updates are free. This is clearly presented on the website. In February 2021 we released the Chip Reset and Repair option which had (and has) absolutely nothing to do with the Analyzer, complete different product, clearly presented on the website. If tomorrow I will invest 1 million $ to release a new feature to Repair Makita batteries you will be the first person claiming why it is not free because few years ago you have paid for an analyzer, I am still shocked. Summer is coming fast, DJI asked me to pay for the drone, I was shocked but I decided to pay for it, it is not normal to pay for a product but I did the effort and I have paid for it. After some time I have seen that DJI released some Guides (dji.com -> Explore menu -> Buying Guides), I have tried to download them but SHOCK they are asking me to pay for this service, what is this ? I paid for the drone, how they can ask me to pay for all their features which will be released in the next 100 years ? Still shocked ...
the best way to open or disassemble the laptop battery..pour some drops of petrol in the connector holes and shake it ..then twist slightly with both hands then it will open without any tool and it will also not crack or destroy
Hi 👋 i want your old battery eeprom i want to study it in hex editor i am positive it's possible to reset cycle of battery charge throw eeprom (bios) can you give me 3/4 old buos download link?
Loved it. I have an old dead laptop battery for a Toshiba L510 that I've wanted to fix for a while. However, I've taken the pack apart and disconnected the cells from the PCB. I've left it alone for about a year now. Would it be possible to interface with the PCB after having left it disconnected from any power source for as long as I have? Is there any chance of reprogramming the onboard chip or will the volatile memory be gone and the battery has no chance of refurbishment?
If the chip was unlocked (no PF set) before disconnecting the cells, then everything should be fine after reconnecting the cells. If it was locked then there is no way to unlock it, you will need our NLBA1 device to unlock it. Note that there is a fuse on the PCB, in some cases the chip blows it up and it has to be fixed.
Good morning my friend you could make a video for this 2F8K3 battery for dell Alienware 17r1 for the battery model if the machine can activate it and pass the driver on the cip I would greatly appreciate it to make a video for that battery and Show us the connection to the terminals thanks very much with appreciation ...!!???
Hi I have problem with NLBA1 I recell the battery as you always start from the positive I did what I said but after recell when I reset the FCC it has been reset but after charging the the FCC dropped again what was before also the chip is supported what could be the problem can you guide me. Fuse is also good. Thanks in advance
The cost of getting new cells plus the repair work will be much more expensive than buying a new battery. To be honest, this wont really be feasible to spend money for this equipment just repair batteries. Unless someone is in recycling and refurbishing business.
It is not true. Not all laptop batteries require replacing the cells, there are tons of laptop batteries with good to new cells that are only over-discharged. By precharging them and resetting the chip, the battery will function again. Many of our customers are recovering tons of such batteries. More, the equipment is by far the most advanced laptop battery analyzer, you pay once and you get unlimited software, all updates included. This is a must-have device in any laptop shop or laptop repair shop. There are tons of testers for LiIon/LiPo cells but for laptop batteries, just one, NLBA1 :)
@@nipembedded9976 Over-discharged or deep-discharged, what is the difference? Recharging/operating a deeply discharged battery is fundamental dangerous (and prohibited)
An over-discharged cell has a voltage below the lowest threshold mentioned in the datasheet. Depending on the voltage level you can pre-charge it safely.
This is a useful tool for those in Africa or Eastern European countries where money is short or Amazon does not deliver......but in first world countries I think people will no doubt prefer to buy a new battery rather than have a diy home made battery made from probably recycled 18650 cells .....Thanks for your upload
Most of replacing batteries are bad quality, recycling an original battery with original cells will make the battery working as a brand new original one. There are many new slim and flat batteries which are locked because the cells are over-discharged (stored a long period without charging), such batteries can be repaired by pre-charging the cells to about 3000mV and resetting the chip.
Will the chip reprogram itself with multiple charge and discharge cycles after changing the battery cells? In other words is there any way to repair battery without needing specialized equipment to reprogram the chip?
Καλημέρα φίλε μου θα μπορούσες να κάνεις ένα βίντεο για τη συγκεκριμένη μπαταρία 2F8K3 για Dell Alienware 17R1 για το μοντέλο της μπαταρίας αν το μηχάνημα μπορεί να την ενεργοποιήσει και να περάσει τους driver στο cip θα το εκτιμούσα πολύ να κάνεις ένα βιντεάκι για τη συγκεκριμένη μπαταρία και να μας δείξεις η συνδεσμολογία στους ακροδέκτες ευχαριστώ πολύ με εκτίμηση...!!??
@@RMASTOP Please open a topic on the NLBA support forum and also add screenshot with the issue so you can can a more accurate and fast reply. If the size of the eeprom that you want to write is different that means it's from a different battery or different chip and it's not safe to write it.
The analyzer NLBA1 device Lifetime and Unlimited is roughly 300$. You pay once and you have it all the time, free, all updates. If you want to repair batteries you need The Reset license which is 200$ for 1 year. If you repair a few batteries like 30 in the current year then the next year we can give it for free.
@@rehansiddiqi1668 NLBA1 device is PRO Analyzer with charging, discharging, calibrating, wake up, testing, measuring internal cells resistance, checking the cells, generating reports LIFETIME, so you pay once and that's it. If you want to Reset battery chips (Repair Laptop Batteries) you can buy 1 Year Chip Reset License = 199$. It supports a lot of chips, including all Apple Macbook batteries, even 2021.
Hi Sir Please Answer my question My laptop battery NOM 11.4V 2.1Ah 24Wh This battery cells dead it has 3 cells of 2100 mAh is it OK to replace with 2600mAh Cell
this tool is not for home use it's for computer shops you need to pay an extra very expensive fee every year to be able to reset and reprogram the chip i was one of dose fools that purchase this very expensive toy thinking that i was going to save 3 brand new laptop battery's that were in storage for to long and guess what nada this toy is now a door stopper So unless you hone a computer shop don't buy it
@@nipembedded9976 Useless tool for ordinary users, not for service centers, but I am curious why to renew old battery which may cost you more than to buy new one.
@@Ravenola 1. The tool is a PRO tool like tons of other PRO tools used in the repairing industry. Your comparison is out of scope. 2. Okay, which is cheaper, repairing 30 x 2022 Apple Macbook battery or buying 30 x New Original Apple Macbook battery ? You can replace 30 with 1000 or 10000, there are no limits in the number of batteries.
PLEASE KEEP ME POSTED!! I still have the NLBA1. Its a brick at the moment. I purchased as a chip unlock / reset, as they said chip unlocks were coming. They never said anything about moving to a subscription model, until they announced they did. A subscription model is cost prohibitive for us, as we rarely have battery chip locks.
I think this is an interesting product! BUT you have to change or add the license model, so that it can attract more customers! There are 3 sorts of potentially customers: 1: Big Laptop Repair Centers (as there cant be many left I guess, the laptop market is decraising). 2:Smaller Computer Repar Shops. 3: DIY enthusiats. The License model is way to costly for group 2 and 3. (People write $199 but it looks like it now costs $249, so wrong direction). Smaller reair shops dont repair many batteries - the sell new batteries or new computers to the customers, its a better deal for both. End customers dont have knowledge of different quality but are suspect to repaired batterys, also the time of labour is to costly in most Western countries. So I see group nr 3 (the Enthuiasts) as the biggest possible customer community for the future. They dont make money on their hobby, so its allready a big investment to buy the hardware, just for experimenting och there own pile of laptops an mayby helping som relatives. BUT they should be a welcome addition to the community, because the dont count the time spent and could share the findings so that the Database will increase, to benefit for all! Of course there should not be free licenses - But an addition of a License for Personal Use is needed. It could be a (much) lower annual fee, or preferably a license where you pay for some amount of uses, lets say 15 or 30. then you have to buy another set. That way I beleive it will benefit both users and also your business!
You make some good points. The small user license can be good for customers and businesses. As you and others have pointed out, it depends on the target market for this device. It would appear that the business owner is not interested in the occasional hobbyist that would probably choose to use brand batteries ( like Samsung ). The problem is that this device is likely being used by battery refurbishers that flood the market with inferior batteries that last at best a few months and have ridiculously specced capacity ratings. It seems that this business seller is not too worried about that.
@@nipembedded9976 My comment was not about the originality of the chipset. I am talking about the use of non-branded cells, not the container battery itself. I hoped that was obvious from my comment. I refer to Samsung batteries, just substitute that for cells, and hopefully it will make sense to you