Repairing a old Paslode IM350/90CT nail gun. Compleat service and repair, showing every step.

Подписаться 109 тыс.

Просмотров 12 тыс.

50% 1

Every repair shops bread and butter is a paslode service. These come in constantly and and even when it's a repair, they noramly also need a service as well.
The longest part of a service is actually the cleaning and drying each part.
I sped that part up as it was nearly 30mins alone.
#paslode #nailgun #im350 #paslodefix #pasloderepair #paslodeservice #service #tools #repairing #tools #repair #fix #powertools #toolfix #deandohertygreaser #toolrestoration #howto #toolrepair #machine #repairingmachines #fixingmachines

Опубликовано:

15 апр 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 57

@RubyRichardson-o8p День назад

Digging mine out of storage after 15 years, I had it working in a few hours. :-) Thanks.

@geneo1976 8 дней назад

I have cleaned many of those Paslode Impulse nailers for folks. If I had a dollar for every time someone brought me the tool saying it was broke and I had to tell them that they had an old fuel cell I would be a rich man! I wish that I had your cleaning tub. great job as always!

@stephens700 3 месяца назад

Very Impressive as always Dean, Being able to tear apart a near 20 year old tool with so many components toss all the parts in a pile, clean them and reassemble and have it working good as new while explaining what your doing is a true talent. Thank you for sharing

@homestead36 3 месяца назад

I could never. Many years of practice maybe. Definitely very impressive.

@padraiggray5342 3 месяца назад

Dean could put it together blindfolded

@davidsmith-ih2kk 3 месяца назад

Yep, homestead36 I agree entirely............

@davidsmith-ih2kk 3 месяца назад

Yep, Dean, I will be pulling apart an old passlode just like you. Screws and bolts will go flyin through the air to all corners of my bench, some will even fall on the floor, or get wedged in places I won't be able to find them. But it won't matter a hoot, because once its in pieces it will be stayin in pieces, just long enough to put them all in a big plastic shopping bag, because there's no way I'm goin to remember how to put it all back together. Yep pulling it apart is easy, it's the putting it back together that's hard. You just make it "look" so easy.

@miikechloeliegh88880 3 месяца назад

I wont watch any other video to repair my tools the right way is the best way to

@memofrf 3 месяца назад

No mess pure knowledge. Thank you.

@prasadvn524 3 месяца назад

Mr Dean lovely video as always.Though nail guns are uncommon tools in India I enjoy the video for the sheer Skill you exhibit.Keep doing more videos.

@bionicman6969 3 месяца назад

Have this exact nail gun and it's been one of my most reliable tools with just simple maintenance they were built to last, it just keeps going. Keeping them clean and lubed is the key to longevity.

@alastairchestnutt6416 3 месяца назад

Great demonstration of dismantling, repair, cleaning and reassembly. Thank you.

@jasonvandervalk3679 3 месяца назад

I always appreciate the positive feedback this man gets he does amazing work

@Stevos-Corner 3 месяца назад

Thanks Dean for another great one mate.

@user-lk7ku1ef1k Месяц назад

Thanks for this, found similar gun n some parts were missing n didnt know how to put them back.

@michaelflynn6178 3 месяца назад

Thanks Dean informative as always

@Silky_boi 3 месяца назад

First to the workshop 🤝🙂‍↕️

@dieseldog1959 3 месяца назад

Good job. You have a fan in Houston, Texas. Cheers!

@dodgyjpt 3 месяца назад

great to see the full amount of work that goes into a good repair

@leonardpaciora5039 3 месяца назад

Thanks again Dean!!

@miikechloeliegh88880 3 месяца назад

He giving out free classes on how not to screw ball your tools i love it and use it

@VeritasPraevalebit 3 месяца назад

Dean, I have a suggestion. In order to make it possible for anybody to find repair instruction for a tool of a particular make and model you should number your videos and publish a listing of the machines that are serviced in each video.

@efektmurowany 3 месяца назад

Thanks for info about drying out the parts. After cleaning I use 90% ipa with some rag - it evaporates very fast.

@johndalessandro6433 3 месяца назад

Id be so worried to knock the screws all over the place...Dean just lays them out ! A real pro at identifying and making like new as much as possible!

@aydenandchase7220 3 месяца назад

Haven’t seen all your videos but finally saw one where you explained the reasoning to your throwing the parts around on your table. Would it still not be more efficient to have a bit more order to it, like having small trays at the end of the table to throw the parts more ordered, either from disassembly order, or parts order like screws, O rings, etc.. I understand for you, reassembling these tools is as easy as assembling a cheese burger for most of us, but even for a cheese burger, it would be quicker to make, to have the mince, buns, cheese, spices, etc., each in its own place

@philgallagher1 3 месяца назад

@@aydenandchase7220Given Dean's skill level I believe it would be SLOWER if he had to work out which bin or tray to put the individual parts in. As he said, he knows exactly where everything is when he is ready to rebuild so it would take him longer to find them if they were all in separate places. He has developed his work process over many years and thousands of machines.

@johndalessandro6433 3 месяца назад

@@philgallagher1 I've been watchin' Dean for a while and he seems to be doin' just fine. I couldn't do it that way but, I respect hoe he is able to do it the way he does. I am clumsy so I'd lose half of everything lol. Man he knows his stuff. I like how he goes beyond fixing the problem and cleaning the parts in the parts washer ect. If I needed a tool fixed, he would DEFINITELY be the guy I'd send it too

@philgallagher1 3 месяца назад

@@johndalessandro6433 Agreed! I would be crawling around the workshop looking for screws and parts if I tried to do it Dean's way!

@AnthonySmith-hr2kp 3 месяца назад

Nice Silky. I'm second to comment. Love Dean's videos.

@Quietvibes07 3 месяца назад

I own a paslode & enjoy tearing it apart & cleaning it thanks to watching so many of your videos 😂. They are actually very easy to maintain if you do it regularly. Thanks for the awesome videos!

@Marty-lv426 3 месяца назад

Nice bits your using 👌

@jayunderwood3215 3 месяца назад

Thanks for an awesome job, you make it look so easy.

@terrier-ist2760 Месяц назад

I have the same model, after it stopped firing I found the little roller on the switch was not being pushed down enough , could have the roller just worn, I temporary fixed by putting a very thin piece of plastic, shim, between the roller and the switch to make the lug on the carriage push it down enough.

@deandohertygreaser Месяц назад

No this is a common faulty with every paslode first fix gun. From the original im350/90 to the im350+. For the last 20 years we gave been fixing this Simply bend the roller a up slightly. Every gun has this roller slightly bent. But it's a well known and easy fix.

@RayDeery 7 дней назад

When you stop throwing the screws around 🤔 I’d say they are fairly important 😂🤙🏻

@Yes_buh 3 месяца назад

Nice work as always sir

@chippychippy8291 3 месяца назад

Don’t think that pallet is coming apart any time soon. Well done!

@ElMariachi1337 3 месяца назад

Another Paslode fixed!

@simonbates9779 3 месяца назад

Hi Dean. Love your videos and you have inspired me to try and get my brothers old 1st and 2nd fix paslode guns going again. We bought a new genuine battery and gas canisters and I have torn down and serviced the 1st fix and it works beautifully. The 2nd fix gun fuel door keeps popping open randomly after shooting it. This was the reason why it was taken out of service originally. Any advice would be great. Thanks from 🇦🇺

@padraiggray5342 3 месяца назад

Dean probably could put it together blindfolded

@sergaljesus 3 месяца назад

Congtats on 100k :0

@deandohertygreaser 3 месяца назад

Thank you!!

@newby2224 8 дней назад

Great video. I just purchased one of theses and its not working ATM the green light flashes and around every 8 times theres a red light...any ideas what this means? Im in France is there anywhere you can buy the parts...or Ireland I have bought a new fuel cell and charged batteries thanks for any help

@bladeoflucatiel 3 месяца назад

This nail gun is older enough to drink and drive by itself.

@johndalessandro6433 3 месяца назад

Dean, how long have you been repairing power tools and what kind of oil did you use for lubrication? Was it similar to 3 in 1 oil? Ty so much for the videos!

@philgallagher1 3 месяца назад

16:04 It's not a Dean video unless there are parts flying!!

@michaelfairchild 3 месяца назад

After a small chemical burn on my finger Ive stopped touching any chemicals with bare hands. Only one is Isopropal alcohol or acetone if I get that damn superglue on my skin.

@lukefenech Месяц назад

G'day again Dean. Going OK with my IM250A Li strip down and service. Come up against an issue I'm hoping you can help with. The square(ish) gasket/seal that sandwiches between the main body of the cylinder and finned cap of the combustion chamber... It seems to have gotten bigger and for the life of me I can't get it to sit in the groove for reassembly. This part is not listed as available here, only the entire cylinder assembly. Have you ever come across this? Any tips? Cheers.

@lukefenech Месяц назад

G'day Dean, love your work. I'm over in Australia and I just bought a used IM250A Li second nailer. It works well but there is no service agent in the town I live in so I want to pull this one down, service and clean it and consider getting into working on them for other people. Any tips on this model? Things to look out for in particular? I've bought a service kit(genuine) and Paslode oil. Aparrently there's a new grease that Paslode are recommending instead of the oil.. Any thoughts on this? Cheers in advance mate.

@deandohertygreaser Месяц назад

I'm sticking to the oil for now, haven't seen the grease yet. When dismantling any gun. After you remove the top half and before you service it. Always test the motor and spark. Put a battery in and pull the 2 switches. If the motor or spark dont work, the service will not fix it and you will need to buy either a spark unit, moulded board of motor. Saves wasting time servicing a gun that the customer may not want to pay to fix. Also buy a few cheap used guns, body only, so you have most of the spare you need.

@lukefenech Месяц назад

@@deandohertygreaser Cheers Dean. I appreciate the info. The design of these things is pretty fascinating. On a side-note... Finding long series imperial quick change hex drivers is a challenge. Wish they'd use metric. Regards, Luke