I had a similar problem on the RA drive of my Meade LX90. I opened it up with the intention of replacing the spring, but it turned out my spring was fine. The problem was that the old grease became dry and sticky. It gummed up the lower screw (pivot) so much that the spring could not push the worm gear into the drive gear. I cleaned and re-greased the pivot screw, and now I have near zero backlash. Thank you for your video!
@@WilliamLewismcp thanks! Great video. I made the same repair with your guidance. Skies have not cooperated to tell me if it made a difference on goto accuracy yet. Best. Kelly
That's why I went with the spring since that is a wear item. Adjusting the setscrew would have only buried the problem until later then the problem would have been worse.