Replace front brake pads & discs - changer disque et plaquette de frein avant - Peugeot 308 

I'm glad I was helpful 😊

Thanks ;) Probably that's where the saying comes from: "It was raining like in London" :)

Thanks :))

Rip bolts :D

Yes I used blue one medium sticky

Fuck me....! A single drop is suitable. Now, a red strip along the bolt?

Hello. Buy brake discs with integrated ABS sensor ring.

Salut. Nu stiu sa-ti spun acum ce dimensiuni are discul. Oricum atunci cand vrei sa cumperi mergi la un magazin cu seria de caroserie a masinii pentru a vedea ce discuri sunt potrivite pentru masina ta. Dimensiunile difera de obicei in functie de motorizare.

You're right, I exaggerated using the red threadlock. But I don't think I'll ever open them again, the car is already old and almost ready for retirement :)

Hello. The diameter of the brake discs depends on the engine of the car, I recommend going to an auto parts store to correctly identify the brake discs.

@@AdrianDragan Thank you 🙏

Thanks!

Hi! The front braking system is developed by Bosch, the car came from the factory with Bosch pads and discs. The WD40 is good for loosening loose or rusty screws. Thanks :)

@@AdrianDragan Thank you! I’ve learned a lot from you.

Hi. In the box with the new brake pads came only two screws for the caliper guide bolts, I had to reuse two other screws and put new locking solution on those old screws.

Yo tambien tengo un 308… si te puedo ayudar dimelo

Hi, Your brakes may need replacing if you notice any of the following signs: *Squealing noise: Some squealing noise coming from the brakes is expected under normal driving conditions, depending on the cleanliness of your brakes, the materials used for your brake pads and the weather. However, a loud screeching sound is a warning that brake pads may need replacing. Some brake pads use a semi-metallic layer within the brake pad material or an external sensor designed to screech when the brake pad is due to be replaced. This screeching noise can be heard even when the brakes aren’t being used. If you wait too long at this point, the screeching noise will be replaced by a grinding noise which means the brake pads have worn down completely, and potentially can generate additional costs by damaging the brake disc. *Car pulling to one side: If your car feels like it is pulling to one side or the other while you’re driving, it could be a sign of worn out brake pads or that the caliper guide pins or piston is sticking. *Visual check: It’s a good idea to visually check your brakes regularly, for example every 10,000 miles (approximately 16,000 km). This is extremely important if your car doesn’t have sensors. You can visually check the brake pads by looking through the spokes of the car’s wheel. If less than 3mm of the brake pad is visible, then they need to be replaced. *Vibrations: If you feel your car vibrating as you brake, it is a sign that your brake discs might be abnormally worn or have suffered thermal damage following severe braking. How often do you need to replace your brakes? In general, there is no fixed interval for replacing your brakes, as the duration of the brake components much depends upon the vehicle as well as upon driving style. Braking can last up to 80.000 km or even more, but can be as low as 25.000-30.000 km in the case of heavy duty use. Your owners manual will have more information about the recommended intervals for brake replacements of your car’s make and model. It is important to note, if the discs are unevenly worn or badly scored, that it is recommended to replace your brake pads and brake discs at the same time. Source: www.championautoparts.eu/news/when-to-replace-brake-pads-discs.html

Hi, thank you for your appreciation! I'm not sure but in the AutoData documentation these are the tightening couples: Front Brake caliper to carrier: 31 Nm Front Brake caliper carrier to hub: 33 Nm+45°

@@AdrianDragan what means that ''+45°''?

Hi. Theoretically, you can also put bigger brakes from Peugeot 308 with superior engines, but you have to change: calipers, caliper supports, brake discs, brake pads.

- Bolt (Front brake caliper) 2,7 daNm - T55 Bolt (Front brake caliper support) ( assembly- Bolt(s) without washer) (*) Pre-tighten to 3,3 daNm Angular tightening to 45°