Replace Transmission Gasket, Pan, Filter - TH 400 / Turbo 400

Подписаться 4,2 тыс.

Просмотров 13 тыс.

50% 1

Replacing transmission gasket, pan and filter on my Turbo 400 or TH 400 transmission. One of many restoration tutorials on my 1969 Chevy C20.
Jegs Kit: www.jegs.com/i/JEGS/555/60118...
TH 400 Filter Spacer: www.monstertransmission.com/T...
-----------------------------------------------------------------------------------------------------------
Chapters
0:00 Intro
0:49 Take Out Old Stuff
1:44 Unbox Jegs Kit
1:58 Finish Prep
4:02 Assemble
6:23 Finish and Outro
Don't Forget to Like, Comment and Subscribe!
-----------------------------------------------------------------------------------------------------------
Info:
RU-vid Channel: / chrisncars
Website: chrisncars.com/
Mail: Mail@ChrisNCars.com
Video: • Replace Transmission G...
This is one of many restoration videos I have made. More can be found here:
• WorkiN on Cars
-----------------------------------------------------------------------------------------------------------
Music:
♫ Track - Jamie Berry - Sweet Rascal
♫ Watch - • #ElectroSwing | Jamie ...
♫ Follow Jamie Berry
SoundCloud: / jamie-berry
#ChrisNCars #Transmission #DIY
-----------------------------------------------------------------------------------------------------------
Disclaimer:
Due to factors beyond the control of Chris N’ Cars, I cannot guarantee against improper use or unauthorized modifications of this information. Chris N’ Cars assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Chris N’ Cars recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Chris N’ Cars, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Chris N’ Cars.

Авто/Мото

Опубликовано:

8 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 32

@nolanscott9330 2 года назад

Perfect Vid, nice and simple no extra stuff. This is quality stuff. And exactly what I needed.

@ChrisNCars 2 года назад

Thanks! Glad it helped.

@georgeumstead2705 2 месяца назад

Very nice and informative video. Thank you

@albertrivera5443 4 месяца назад

Very good video!! Thanks for posting!!

@burlgoat53 Год назад

Great simple install.....doing mine tomorrow ...thanks sir !!!!!

@ChrisNCars Год назад

Good luck today!

@Sadioli 2 года назад

timing on this is great. TY!

@ChrisNCars 2 года назад

Hope it helps!

@johnhenryholiday4964 Год назад

Excellent video.... I prefer to use the cork gasket which is what the trans came with.... Im sure that your rubber gasket worked equally as well....

@ChrisNCars Год назад

I prefer cork too this kit just came with rubber

@moon27hall Год назад

Curious, when u checked the fluid level at the end of the vid, was the engine running? Hard to tell. Thanks! Great vid btw.

@ChrisNCars Год назад

It was after running it through the gears for about 10 mins. The engine is off when I pulled the stick.

@francoamerican4632 Год назад

What did you do with the debris magnet now that you're using an aluminum pan? Would like to see a video showing how to change a gasket on a turbo 400 on a 1969 Firebird. They have a cross member that prevents access to one of the pan bolts and are a MAJOR pain in the you know what.

@ChrisNCars Год назад

The bolt on new pan has a magnet. If someone lets me work on their firebird id do it!

@johnhenryholiday4964 Год назад

Your car and a P-30 chassis share that same misfortune... that cross member is a major pain....

@DUCKSAREEVILLLLLLLL 10 месяцев назад

@@johnhenryholiday4964 Here's what worked for my 1987 Mallard Class A P30 motorhome with a TH400. After spraying the bolt and hole with break clean as a kind of lube for the bolt thread (and to facilitate better grip of the hex side), start the bolt with left index finger from the cross member side and your right index finger from the passenger side. Once you have it almost touching the pan, access the bolt from inside the cross member with a box end 12 sided wrench. There was enough room that I was able to use my Sears long 13MM wrench to tighten it. To loosen it, I used a long, U-shaped wrench from "Powercraft" or something, but I think loosening the bolt from inside the crossmember would have been MUCH easier.

@Troy_Built Год назад

Thanks it had been decades since I did a filter and gasket on a TH400. When I noticed how loose that filter was I wanted to quickly check something to make sure it was supposed to be like that.

@SILENTKILLA972 Год назад

What size is that gasket I have mine leaking from the drain plug but not sure exactly what size it is

@ChrisNCars Год назад

Sorry not sure the plug came with the pan kit

@SILENTKILLA972 Год назад

@@ChrisNCars that's ok I called and asked its 1/2 20 threads so the ID of gasket would be 1/2

@-COOL-ARROWS-GARAGE Год назад

Any leaks yet?

@Michael-B41 8 месяцев назад

Advice dont use the paper filters go with screen type allison and double o ring filter tube case side

@West_Coast_Ganbaru Год назад

. . .the filter is supposed to be able to move around. It's NOT supposed to sit snug. It is designed to float in the surface of the fluid.

@ChrisNCars Год назад

I remade this video because everyone was giving me crap for letting it float in the first rendition 🤦‍♂

@West_Coast_Ganbaru Год назад

@ChrisNCars its okay. I didn't mean to sound so rude, and I apologize. Your original video was correct. The filter is supposed to float freely, hence the amount of play on the singular bolt. When know-it-alls come to your comment section just hit them with facts from the manufacturer.

@ChrisNCars Год назад

@@West_Coast_Ganbaru yeah, haha! I mean that's what I get for posting on youtube. But, it also helps me be better at working on cars and making videos!