Radiator heating is the main type of space heating in individual houses and communal apartments! Consider how to connect a bimetallic heating radiator yourself!
1) Before starting installation, it is necessary to block the flow of coolant into the system at the outlet and inlet.
2) Before installation, it is necessary to check the completeness of the battery. The radiator must be assembled. Otherwise, it is necessary to assemble the unit according to the manufacturer's instructions.
3) Bimetallic radiators use both right-hand and left-hand threads. This should be remembered while tightening fasteners.
4) When connecting sanitary fittings, the right choice of material plays an important role. As a rule, flax with a thermally resistant sealant or FUM tape is used.
5) Before starting the installation, you must have a well-planned radiator connection scheme. The connection scheme of bimetallic radiators can be lower, diagonal or lateral.
6) When the installation is completed, the device is switched on: all the valves of the unit that previously blocked the path of the coolant open smoothly. If you open the taps abruptly, you can provoke clogging of the inner tube section or cause a water hammer. After the valves are open, the excess air should be drained using the Mayevsky crane.
7) Do not cover bimetallic batteries with screens, install them in wall niches. This will lead to the fact that the heat output of the device will decrease sharply.
Your subscription is the best help to the channel: / igorvasilyevich
#bimetallicradiator #battery #radiator
27 сен 2024
