Replacing A Plastic Conservatory Roof & A Flat Roof With A Pitched Tiled One With Velux Windows

Подписаться 51 тыс.

Просмотров 25 тыс.

50% 1

Heat Loss Through The Leaky PolyCarb Roof, Lets Replace It !, Also the house has a flat roof extension, Lets bring it all together to make a great space.
Links to all parts and tools in the video:-
Harlows Timber www.harlowbros.co.uk
www.ecatoolfast.com
leicesterbuild...
Concrete brick fixing screws £17 amzn.to/3AFTTvC
Milwaukee Drill Impact combo amzn.to/3AvUfFq
Makita SDS Drill amzn.to/4dphwah
Big A frame Ladders amzn.to/4fM7926
Crow bar set amzn.to/4dorV6o
Milwaukee demolition gloves amzn.to/3SSMfnU
Milwaukee Hackzall amzn.to/3yHDWEI
Folding saw stools amzn.to/3X7gl9U
Milwaukee 5m tape measure amzn.to/3ApQ1iz
Milwaukee roofing square amzn.to/4cwGVOj
Combination square amzn.to/4drKxlJ
Big roofing square amzn.to/3yIaP47
Irwin Grips clamps amzn.to/3AlgFJ9
Mitre saw amzn.to/4dp2bqx
Milwaukee multi tool amzn.to/4dpIpuZ
Bosch Angle Grinder amzn.to/46SG6OI
Diamond grinding discs £12 amzn.to/3X5EL3s
Makita Blower amzn.to/3WWjUyC
erfelectrical....
Lead Mate sealant amzn.to/4cA6Kg9
70mm hole saw amzn.to/4cA3FwK
Builders string line amzn.to/3X5lCPm
Link to part 2 Insulation and plasterboard video • New Conservatory Roof ...
#aaanton11 #pitchedroof #diy #milwaukeetools

Опубликовано:

26 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 81

@MASTER-uz2ed Месяц назад

Absolutely fantastic build and for those commenting that its like an 80s build when compared to modern methods....well can i suggest that they watch plenty youtube vids showing horrendous issues with modern methods. The breather membrane is current and long lasting so while its dangling into the gutter it will last a long time say 15 to 20 yrs and after that if does rot then that part section can easily be replaced by slightly lifting the bottom tiles and sticking more membrane or even a drip tray if you like. Well done you've got a new subscriber here. Having worked on building sites for many years, I can assure people that theres a lot of uneducated and even criminals doing awful standard work just for the money. They dont take pride in the work that they do. I was accused more than once about being pleased with my work. In fact one awful ex boss who often put me down was caught thieving materials and accused of show boating only when the customer was on site!!!

@aaanton11 Месяц назад

I am with you on this one, you can be my wing man anytime 😂 Thanks for the great comments👍🏻👍🏻🛠

@homebrewdan8116 2 месяца назад

Love it. Bout a house a year ago, didn't realize it was guna be so much of a doer-uper. One of the last things I'd like to do is replace the conservatory roof. I was thinking of going for a OSB boar and liquid rubber system on top. Your video has given me food for thought. Thanks for putting this vid together. Very helpful. Dan 👍👏👏👏

@aaanton11 2 месяца назад

Thanks for the great comments👍🏻👍🏻🛠

@aminkeykha5546 2 месяца назад

In fact I listen to you for your beautiful accent . This time I learned Mackling , joist and pitch as gradient and clad as cover . You are wonderful . Thank you .

@aaanton11 2 месяца назад

😂 Happy to talk, plenty more waffling to come!! Thanks for the great comments👍🏻👍🏻🛠

@johncooper8040 2 месяца назад

What a transformation looks stunning and I like the idea of the three velux windows because why not.

@aaanton11 2 месяца назад

Thanks for the great comments👍🏻👍🏻🛠

@frog-eye1420 Месяц назад

Very nice tidy job there and a well put together video making an interesting watch 💯

@aaanton11 Месяц назад

Thanks for the great comments👍🏻👍🏻🛠

@labbo5591 2 месяца назад

Should have doubled those joists either side of the velux opennings!!! This is why we have building regs to prevent people buying dangerous bodge jobs!!!🤯🤯🤯🤯

@aaanton11 2 месяца назад

Thats an interesting point, with my calculations the amount of joists I used and the thickness and the length, pitch of the roof I have more than enough support for the weight of the tiles and 1m of ice if we have a really bad winter 🥶 Thanks for the great comments👍🏻👍🏻🛠

@petef7323 Месяц назад

Joists or rafters? 😂 triple for wider openings

@gavjlewis 2 месяца назад

Very impressive. Seems you can turn your hand to almost anything. 👍

@aaanton11 2 месяца назад

You can do many things if you have the tools and RU-vid 😂 Thanks for the great comments👍🏻👍🏻🛠

@spencerhulme1203 2 месяца назад

Aaanton your so damn talented! Tell the next door neighbor to move out so i can live next to you lol! I was like omg he has fallen, thar brick was a close shave! I was hit on the head with a brick in my early days from doing a roofing job it knocked me out, but seriously a fab job! 💯

@aaanton11 2 месяца назад

Thanks Spencer for the great comments👍🏻👍🏻🛠

@tonybeards2978 2 месяца назад

You need to double up the timbers for the velux Windows mate

@aaanton11 2 месяца назад

@jimbo9310 2 месяца назад

Well done ant, would like to see the inside as well thanks 👍😊

@aaanton11 2 месяца назад

Coming soon! Thanks for the great comments👍🏻👍🏻🛠

@datsunruss 2 месяца назад

Cracking Job Aanton.

@aaanton11 2 месяца назад

Thanks for the great comments👍🏻👍🏻🛠

@jsingh1556 2 месяца назад

Great video thanks for uploading planning a similar job

@aaanton11 2 месяца назад

Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

@tavners8044 2 месяца назад

Looks very neat

@aaanton11 2 месяца назад

Thanks for the great comments👍🏻👍🏻🛠

@georgeroberts6457 2 месяца назад

great video m8, but unless you added anything to it where you placed the L pvc on the left running up the tiles it looks like the verge isnt protected from the rain that whole side may fail

@aaanton11 2 месяца назад

Yes I have sealed behind the L trim so no water can pass, Thanks for the great comments👍🏻👍🏻🛠

@edthompson9337 2 месяца назад

You cut way too much out on the birds mouth cut (front cut out over door), maximum 1/3 depth of rafter, you effectively reduced the size of timber you used!

@aaanton11 2 месяца назад

I needed the extra cut to get the pitch right, don't worry I fixed with extra screws right through the thicker sections for extra strength Thanks for the great comments👍🏻👍🏻🛠

@edthompson9337 2 месяца назад

@@aaanton11 Additional fixings would make no difference, the underside of the rafter is not bearing on the timber wallplate therefore reducing it's strength. That along with not doubling up the rafters either side of the roof windows means it would not comply with UK building regs. It's a good effort for an amateur but ultimately flawed.

@AlexGnok Месяц назад

exactly what I thought when watching this - so much thickness of the rafter is wasted. You almost reduced the rafter to something like 2x3. Amount of fixings doesn't matter as timber can just split

@mikebarry229 Месяц назад

@@edthompson9337 In this case the single rafters were probably JUST about OK, but 100% that degree of notching is not permitted, and additional screws wouldn't generally be accepted, instead multi nail joist hangers could have been fitted to provide the additional bearing required.

@frednetherlands887 2 месяца назад

I am glad you are ok.

@aaanton11 2 месяца назад

Thanks Fred, the bruise's have almost gone!! Thanks for the great comments👍🏻👍🏻🛠

@monturrahman878 2 месяца назад

Looking to do the same job next year. Can you please show inside how much natural light has been lost. What levels and type of insulation has been added under the new roof. More detail as always great videos I admire your lone working.

@aaanton11 2 месяца назад

All to follow, I have a few more videos to come, Thanks for the great comments👍🏻👍🏻🛠

@daves4026 2 месяца назад

Aren’t the side spars to the Velux windows supposed to be doubled up and the tops and bottoms as well?

@aaanton11 2 месяца назад

Depend on how thick the joists are, Thanks for the great comments👍🏻👍🏻🛠

@mikebarry229 Месяц назад

As a general rule of thumb yes, doubles are often required each side. A simple way to look at it is the rafter size required without rooflights. If your roof needed 145x47 rafters at 400c/c's then yes you would need doubles each side (because you need to make up for the rafters being removed where the rooflight is). In this case it looks the span is about 2.8m and 120x47 C24 rafters at 400mm centers would have been adequate as rafters, but those would definitely have needed doubles around the roof light. 145x47 rafters in C24 grade being slightly deeper (and therefore stronger) would probably work as singles in this particular case, JUST. Very often doubles aren't needed top and bottom as the spans are so short (unless you have an extremely wide roof light). Contrary to some suggestions here, this work requires Building Regulation approval so the Building control surveyor will make sure that appropriate rafter and trimmer sizes are used. Building control surveyors will typically ask for doubles (at least initially) regardless of whether it is actually needed structurally as it is a good habit to get into.

@philipbunker146 2 месяца назад

Top job!

@aaanton11 2 месяца назад

Thanks for the great comments👍🏻👍🏻🛠

@MrGrtx 2 месяца назад

Made me chuckle when I saw you'd left the table and chairs under while you ripped the roof off great job though👍🏻

@aaanton11 2 месяца назад

😂 I like to plan ahead, needed somewhere to drink my Tea, Thanks for the great comments👍🏻👍🏻🛠

@johnbrown3471 2 месяца назад

The pitch can be as low as 11degrees with certain makes of tiles. This is not so that rain water rolls down but to ensure water cannot blow back up the tiles.

@aaanton11 2 месяца назад

Thanks for the great information👍🏻👍🏻🛠

@asadr4264 Месяц назад

Hi, did u need planning permission to replace the existing roof with a pitched one?

@aaanton11 Месяц назад

Yes, Thanks for the great comments👍🏻👍🏻🛠

@asadr4264 Месяц назад

@@aaanton11 thanks for the reply, God bless 🙌

@sajjadimran6297 Месяц назад

👍

@aaanton11 Месяц назад

Thanks for the great comments👍🏻👍🏻🛠

@robertharradine9877 2 месяца назад

Great video, seems like we can learn a lot from you 😊

@aaanton11 2 месяца назад

Thanks for the great comments👍🏻👍🏻🛠

@waynekerrr9027 2 месяца назад

Didnt know if this was a diy video, or dance to salsa music video.

@aaanton11 2 месяца назад

With so much fast speed I felt it needed some music, sorry if it was too much!! Thanks for the great comments👍🏻👍🏻🛠

@worldofrandometry6912 2 месяца назад

Just had my house re-roofed and they put sheets of OSB on the rafters, then the membrane, lathes and tiles. Maybe the OSB sheets are a local regulation. Good job anyway!

@aaanton11 2 месяца назад

It depends what was underneath, Thanks for the great comments👍🏻👍🏻🛠

@mikebarry229 Месяц назад

Not a requirement in the England and Wales, in fact you wouldn't be allowed to do it like that as the membrane would be pinched between the lathes and OSB, trapping any water that got through the tiles. If you wanted to use OSB under the membrane you would need to add vertical battens in line with the joists on top of the OSB, then drape the breathable membrane over those battens, then fix the lathes over that. Alternatively the vertical battens can go over the membrane, but not as good in my opinion.

@worldofrandometry6912 Месяц назад

@@mikebarry229 Yes, there are battens under the lathes. The original roof (built in 1975) had sheets of what looked like plasterboard on the rafters with felt over the top of that. All new roofs around here now have OSB sheeting.

@mikebarry229 Месяц назад

@@worldofrandometry6912 Guessing you are in Scotland, I forgot rules were different there so edited my original comment!, makes for a good reliable roof where exposure is greater.

@worldofrandometry6912 Месяц назад

@@mikebarry229 Yeah, we need a good roof up here!

@toy838 2 месяца назад

Is that your house nice work you are clever though I have trouble standing as it is let alone on roof

@aaanton11 2 месяца назад

Not My House, I have trouble standing on the roof too!! Thanks for the great comments👍🏻👍🏻🛠

@terrymorton9941 2 месяца назад

What screws were used on the wallplate? Thanks in advance

@aaanton11 2 месяца назад

Link to Concrete brick fixing screws £17 amzn.to/3AFTTvC Thanks for the great comments👍🏻👍🏻🛠

@KingstonHomeMaintenance 2 месяца назад

What degree pitch did you say? 17⁰ For that span if approx 3150mm you would need a rise of 963mm at the wall, which is nearly 13 course of bricks. Have you also notified building regs, as the conservatory is no longer and seems for to be akin of an extension plus that new roof construction has to be passed. Looks like about 8 course or 600mm.

@aaanton11 2 месяца назад

Yes all is inspected and the pitch is correct, Thanks for the great information👍🏻👍🏻🛠

@johncooper8040 2 месяца назад

Windows wont weigh more than roof covering so cant see why you'd double up timber? Cutting a rafter to fit window of course need to strengthen but not for new roof with plenty supports.

@aaanton11 2 месяца назад

Yes, I factored in the windows and used larger joists than needed, Thanks for the great comments👍🏻👍🏻🛠

@edthompson9337 2 месяца назад

@@johncooper8040 The rafters on either side of the roof windows will have a greater load due to carrying the rafters that have been trimmed to fit the rooflight, they need to be doubled up and bolted together.

@chrisgregory2269 2 месяца назад

Cavity tray ?

@aaanton11 2 месяца назад

Yes none were fitted on the original build, Thanks for the great comments👍🏻👍🏻🛠

@thomtrucker1925 Месяц назад

Idea is fine, but structure is built like in 1980. No air vents, flapping membrane in gutter. Every good builder know this method is far old and has plenty issues.

@aaanton11 Месяц назад

Thanks for the great information👍🏻👍🏻🛠