I have been wanting to do a video for standard size (3.9 inch) beach coasters. Give your waves lovely 3D effects. Always note that all the layers I do aren't required for 3D effects, and of course you can add more layers if you like. Ocean coasters are bit more tricky because you are working in such a small space, it is easy to overfill the color layer then spend time keeping the resin off the beach, so always have something on had to keep your coasters tilted.
One thing I would do over if I was going to do this video again, is to bring it down to 6 total coasters. 12 coasters is the most I can make at once when I'm familiar with the creating recipe. I wouldn't recommend working on this many at once. The more time you have to ensure each one is created with attention and beauty the better. On the other hand, watching the fast motion on 12 is satisfying to me for some reason :-) Always remember you can skip through the video quickly by clicking the next chapter
If you found this video informative and would like to buy me a coffee or leave a tip (cheers!): www.paypal.me/resinasyouwish
00:00 Breaking wave beach coasters
00:13 Layer 1 (gold beach)
04:21 Layer 2 (white wave)
06:08 Layer 3 (Ocean colors)
14:44 Layer 4 (clear/waves/hint of color)
16:52 Layer 5 (repeat clear/waves/hint of color)
17:35 Sand and prep
20:41 Finished
23:29 See them glow
24:11 Using them as magnets
I am an Amazon associate; I receive commissions from the qualifying links to amazon listed below:
gold mix (for sand/beach):
Mehron Makeup Power (metallic powder)
Gold: amzn.to/31XBsQ3
and (Mica powder)
Bling it gold: amzn.to/32DoEyp
WHITE (mixture of Castin’ craft with a 4-6 drops of the alcohol ink):
Castin Craft white: amzn.to/3e0MYfB
Alcohol ink white: amzn.to/38ttAGZ
Ocean colors:
Ultramarine blue by liquitex acrylic paint: amzn.to/3e7GtId
Phthalo green by artist’s loft acrylic paint: amzn.to/38uI61q
Cobalt turquoise Hue by decoArt acrylic paint: amzn.to/3f5HJg4
Glow mix: Combined to make this soft hue of teal:
Phosphorescent green - glow in the dark by Golden acrylics: amzn.to/3e1j4aY
(One drop of) Dr. Ph Martin’s TEAL ink: amzn.to/31Ro3ZL
(A pinch of) interference green pearl ex powder pigment: amzn.to/31HvToF
Coaster Bottoms:
Coaster Cork bottoms (regular size): amzn.to/2ZFG6iC
(this is just link where I found them - you may have a better idea)
Coaster molds:
3.9 inch: amzn.to/31HJ2hr
Typical tools I use:
Sizzix Accessory - Die pick: amzn.to/38SSgL8
Dental pic: amzn.to/2Gcj4tG
Dot tools: amzn.to/3s5JFMq
Paint spatula: amzn.to/3i88xNA Dental pic: amzn.to/2Gcj4tG
Torch: amzn.to/39suJiH
1. Heat gun - I have a red version of this one: amzn.to/2WXGrwq
2. Heat gun - Green version: amzn.to/3uhkuaa
Heat gun tips and nozzles:
Here is a link for just heat gun tips if you already have the gun but don't have the end pieces: amzn.to/2GPn3wC
Dremel 3000: amzn.to/3o4POra
Dremel bits Stone Bit: amzn.to/2NSyAvk
120 Sand Paper Grit Dremel bit: amzn.to/2BHns1Z
Tape: this tape is called “drape tape” amzn.to/2BxlFfY
Pink Respiratory Mask: amzn.to/3CLL7bP
Safety Glasses: amzn.to/3ERLamW
Safety Recommended: Carefully read your product labels and warnings, make healthy choices based on your research and craft safely!
Signature pens:
Gelly Roll Pens - Stardust set
Gelly Roll Pen silver: amzn.to/3i52yJV
Gelly Roll Multi pack: amzn.to/2F0M73a
My Shop:
www.etsy.com/shop/ResinAsYouW...
Pinterest: To see more of my designs and videos (Check it out)
pin.it/7qlAsgu
Resin I used: MiraKleer Table Top: amzn.to/2Zl9ziR
16 июл 2024
