Restoration Old Broken Air Compressors // Nothing Is Impossible To Restore Small Air Compressor

Подписаться 207 тыс.

Просмотров 40 тыс.

50% 1

Restoration Old Broken Air Compressors // Nothing Is Impossible To Restore Small Air Compressor
Air Compressor made in Taiwan (star 3HP )
-Type of the Air Copmpressor Direct drive
-Tank Capacity 2 Gal. (Can be customized)
-Motor Power 1 hp, 0.75 kW (Can be customized)
-Power Source AC Power
-Voltage 220V
-Maximum Pressure 8 Bar, 115 PSI
-maximum Speed 2880 rpm
-Noise Level with 80DB
-Cooling Method Air Cooling
I hope you find something useful & enjoy from this video!
I am happy to receive your feedbacks, advices, suggestions to improve myself.
During the actual repair of this cutter we also had a lot of difficulties and challenges because they were old, most of the plastic was weakened.
!!! I apologize for the mistake if I have made in this restoration !!!
Thank You so much follow me thank !!!
► Contact Me: wtgroupvn@gmail.com
Thanks for watching, LIKE, Subscribe & Share!
► Subscribe to channel: bit.ly/3mG3rQi
►Restorations Tools: bit.ly/3J5CVHS
© Copyright by Restorations Tools
I hope you find something useful and enjoy this movie! I am pleased with your feedback, advice and suggestions for improvement.

Опубликовано:

29 июл 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 18

@paulfellows2094 10 месяцев назад

beautiful restoration perfect job love the colours you picked great work

@restorationstools6447 10 месяцев назад

I am very happy to receive your feedback, advice and suggestions to improve myself more and more!!! Thanks for watching and supporting me. Thanks a lot!!!

@wightsanborn4556 10 месяцев назад

Did it work after you fixed it?

@pauloneill8912 4 месяца назад

shiny bomb

@marianpintilie7799 11 месяцев назад

You are right that nothing is impossible, but this restoration from this video is possible and easy to restore.. You are always brilliant🔧🔧🛠🛠❤️❤️❤️👍👍🇷🇴

@tunguyeninh911 11 месяцев назад

Phớt dầu đó mã bao nhiêu vậy ạ

@raficRafi-cr1cr 11 месяцев назад

Thanks 👍👍👍👍👍👍👍❤❤❤❤❤❤❤❤❤

@tombarlow6176 5 месяцев назад

Beautiful restoration but oid oil

@alej504 11 месяцев назад

Gran trabajo ❤💯

@juanowar 11 месяцев назад

Algo empezó a arder. Algun corto.

@arielmonge2570 7 месяцев назад

Si amigo éso pasa con los motores con plaqueta y centrifugo de arranque si no despega el platino inmediatamente se puede quemar el motor.

@raficRafi-cr1cr 11 месяцев назад

❤❤❤❤❤❤

@billvakras8272 10 месяцев назад

Old air compressors are like ticking time bombs - you never know when they will go off. It's not a good idea to have a bomb near you... that's why you never repair an airframe older than 10 years. safety first!

@fighter3120 11 месяцев назад

👌

@PhongThanh-sd8hl 7 месяцев назад

🔨🔧🔨🔧💖💖😮😮😮👍👍👍👍

@Farm_fab 11 месяцев назад

When an air tank has been welded, it can have a weak spot from a poor repair, or it might be thin from rust, and maybe explode because it should have been scrapped, and a better tank purchased. You may be gambling with your own life, and that of friends and family.

@GGigabiteM 11 месяцев назад

The extreme heat from welding makes the metal brittle and subject to failure. When the tanks are manufactured, they're heat treated after welding to normalize the metal and make them strong. You never weld on a pressure vessel after that or you risk your life, or the lives of whoever you give these tanks to. There's also the rot on the inside of the tank that you can't see without a boroscope, and potential stress cracks. Using filler and repainting old pressure tanks to look like new should be a crime, because it's a ticking time bomb waiting to explode. Just buy a new pressure tank, it's cheap insurance.