Restoration old rusty gasoline ChainSaw | Restoring 2-Stroke Petrol Chain Saw 

ض..

@@user-ky5gf1cp2v h

Did you see him pound the main bearing in for the center race... real cool lol

@@jasonhoose5215 Yea i did -.- , made another Comment about that

I found the only people who know what theyre talking about in these comments. This resto made me cringe the whole time

@@maxwelloregan8463 Yeah there are a lot of stupid ones down there 😂

@@jasonhoose5215 🔪、

Same got to my mind, the first thing taught in bearing installations :) Hardly take damage with low pressure but next time hit the outer ring when installing bearing in the hole. When installing to the shaft hit the inner.

That was my first thought. Every time I see a restoration, guys hammer in the bearing on the inner ring...

I did this 1 time and bamm bearings broken

First thing I did when I seen this. Is go to the comments to see if anyone else noticed

That was the first thing I saw, the thing with the inner ring and the bearing seat is painted that's not good

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bDDRl1nKFJk.html Water Pump Restoration

I have don a detailed restoration video in my youtube channel "Workshop media"

Well it started

I noticed that too..

Hehe and more like no masking tape etc ;p

kosti116 honkez

But the ring gaps never are....

Not at all, small bearing can be easily fitted in to the shaft of bearing housing. Heating producers can be done with big and critical equipment.

Not only don't you use the inner ring but I'm pretty sure you should pack them with grease. My theory on this channel and about 20 others just like it, is that it's a rigged. Someone has set up a bot system and pays these people a few bucks to sorta refurbish different items and then they collect any RU-vid money. I found a channel that was 3 months old had 5 videos and like ten thousand subs but each video had over 10 million views each. There are some where you can hear in the background someone wrenching on another project. Easy money just find a item that works sorta,trash it out some more and then pay a person 5 bucks or whatever to "restore" it and some else 5 bucks to film it. Then have 5 or 6 channels,edit the vids and upload and then turn the auto system on to constantly replay the vids, like printing money

Yes!!! I saw that and got a little worried 🤣

That and the piston is facing the wrong direction. Arrow towards muffler.

Reeve i agree, and with a peace of wood or with a plastic hammer.

Я в теме😂😂😂

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bDDRl1nKFJk.html Water Pump Restoration

mmmmm no bar oil either so much FRICTION!! lol

Eedggee5tr

l thought that too bro

yep exactly and should have replaced the bent crankshaft and should have not paint the inside of the engine and should have put it on the dumpster.....

He put the piston on backwards too. Arrow on top should point towards the exhaust, not the intake. That saw won’t last long at all.

@@brodytonelotti3577 he will learn

And he should of heated the case in a oven or use a heat gun

Chain backwards, silicone with head gasket, banging bearings with hammer, must be awesome.

backward chain too..this guy typical asian..has no clue..watched one guy here restore a guitar..found it lying in the long grass..put it back together back to front...

joshua Gargalione how about praising the lad instead of knocking hi so what if he made a few mistakes IMO he did a hell of a job

bent crankshaft, paint inside the engine..... that thing was poop now it's poop with wasted paint and bearing and it will last a week before have a real engine crash locked solid worst than if it was found under the sea after 10 years....

One of the first things I noticed haha That's probably why they left it out there 🤣 I did that when I was a kid and got so frustrated because it wasn't cutting and just burned the wood lol my dad laughed and made me figure it out

@@stillwater62 cheated and turned it around? Lol that or figured it out and turned it around. Not sure why it would be cheating

First thing I saw

@Sean Tyree I'm surprised it took this long for someone to notice

@@stillwater62 this isn't a tutorial bud it's a restoration. I'd be willing to bet over 90% of viewers on this video will never run a chainsaw. If this was a how to then I'd agree with you but it's not. If your learning about how yo put on a chain in this video of tell you that your not using the internet efficiently.

Ngomong naon sih

Yep, I noticed that too. But the worst thing he did is the way he istaled bearings 😱 The bearing nests shold be heated up to ~120 °c and then you put the cold bearings inside. They get inside like a dream and without any hammer.

So what? He found the fuckin saw in the woods. He'll get some use out of it for a while, FOR FREE! There's always some expert asshole critic. I guess maybe he should have called you where you could charge him to rebuild it, Fuckin cheap skate!

It wasn't free he bought a few parts and he put in his time. . I think he'll get five to seven years of use out of it. Well worth his time.

@@randallreed9710 I totaly agree with you dude...there always has been expert assholes and stupid assholes, you decide which one you will bee 😂

Lĺĺl

Agree 100%

That moment when he likes the comment

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c5lnmOqqfZg.html

Why does that matter? It was about the restoration

@@austinledford8501 @@@

@@austinledford8501 Because the videos are fake.

@@uhtred7860 the builds are fake?

@@austinledford8501 No, he disassembles then assembles the stuff, that much is clearly true. What is fake is the "finding random stuff in the forrest when i go for a walk" and the condition of the stuff he "restores" He clearly paints or dips the things in some sort of solution to create a impression of rust or age. Maybe even some reverse editing. pay attention to the "rusty" components before and after, no pitting from rust at all, also the rust/ageing is always the same colour, and comes off very easily. But check out the xbox resto, or some of his other electronic restorations, they are the most clearly faked.

Ну, вы же новости смотрите по телевизору? Там то же самое!

Именно. Неужели кто то такую пилу выкинет в лесу

так и есть

Я так и думал,всё вызывайте ФСБ

У него таких закладок по лесу ещё не на один год хватит. Но скорей у себя на територии зарывает потом просто подкидывает куда-нибудь

А в чём разница и какие последствия?

@@x84pav84x Окна и кольца .

@@x84pav84x место стыка кольца попадает на выхлопное окно, кольцо ломается и последствия печальные!

@@lyadovihifazenda заводиться будет но работать нет, это как бежать задом.

Там стрелкой к карбюратору и стоит

Maybe he'll get lucky and the piston ring won't snap lol.

Do we talk about lubricating the chamber while putting the piston in....?

@@romainberger k

😁

@@handikarahayu4789 !

yup and paint inside the engine and bent crankshaft and whatever.... it work (will last a week)

Its fake water doesn't just end up in the oil tank without a huge ass hole in it.

Remi

Oji

A hug A

Bernardo sousa

​@@jorgetroncoso5821 hhh7hhh

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bDDRl1nKFJk.html Water Pump Restoration

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bDDRl1nKFJk.html Water Pump Restoration

Awesome guess! I took details from your guess and the video and did a web search. This saw is likely a Chinese GR-4500 made by Zhejiang Jiauri Machinery Co., Ltd. (Found the chainsaw details and picture on Alibaba).

@@TacticalTerry the one I have is from an Ebay seller, labelled as a Giantz

@@danieledwards1081 hes trolling you hes from the goe phuc urselph club

2019

Bom maçanico esse é o que se chama de proficional parabéns

Lol at least they have a storyline behind their restorations

I’m surprised he didn’t break one of the bearings wouldn’t matter any way because he gonna have to rebuild it agian

Your screen name is 🔥

@@thebarexam614 в

Wouldn’t say masterful work but thrust is true

Bullshit bullshit bullshit. 1. Noone "just finds a chainsaw" sitting on a cut tree like that. Did the previous owner not think enough of his saw to even take it home after work ... or even to fix it if it stopped working. How lucky, just to find it as a friend was filming you. 2. All these "old machines" he "fixes" are dirtied up to look worse than they are. Plastic does not rust. Alloy does not rust like that. Any chainsaw motor and blade would be covered in oil and sticky shavings.

6ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c5lnmOqqfZg.html

I bet you this dude is from China so what would you expect

3) if he knew that and put piston turned around to get better conrod angle 😁 but this only works 4t engines it rattles cold but no warm anymore

T 54t

O de

thanks a lot You People are the Best! Thank you friends. Congratulation from Brazil.

Look, they gave you a heart. I don't think they understand English. More so, that's not even some antique, just a cheap Chinese chainsaw.

Qqq

😂🤣 🤣 Hahahaha😂😂

Тоже от Белгорода сюда?

I was literally just thinking the same thing “bro you need those, there dust covers”

And The piston is turn The wrong way🤣🤣

yea i agree

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c5lnmOqqfZg.html

Nu

Nu L n lp

Nula o Que bLGXT NLG km

J

Omg you are right.. maybe they were high put it on backwards and put it down and got lost in the woods and died.. that poor dumb soul

I think the same

i saw that to

yes..👍👍👍

Quem aí tb está viciado nesses vídeos de restauração

Actually it looks staged. Its a 50€ chinese 2 stroke chainsaw and someone spent some time make it look old. Bolts arent rusted enough. Flywheel glides to smooth from the crankshaft and the piston looks like didnt seen more use than the break in. Also the rest of the parts lack wear and tear. Rust is mostly surface rust.

@@Smoked786 stupid people no work to do

Smoked yeah um or maybe there isn’t a qualification for restoration. It’s not from 1960 but it wasn’t new and staged to look old either. “Not rusted enough” seriously?

also notice That he reuses the Old sh*tty CC gasket

Он Русский, привык к УАЗикам, здесь всё тоже самое, отвёртка, симпатии, ну и благословение коей-то матери!

Yeah he has put on the piston wrong way aswell the arrow on the piston has to point towards the exaust

The chain is not backwards 🤨

Fuel does evaporate 🤪

@@peytend5809 it was when he "found" it and started working on it.

@@brettwhetzel4705 ohhhh I was looking when he was working on it

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c5lnmOqqfZg.html

Pretty sure he can fix it

@@tggraham3321 by looking at the video, probably not.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c5lnmOqqfZg.html

nonton sampek hidup

That’s some serious dedication

exact!! also the wrong mounted piston (arrow points to exhaust, not intake)

😊

騾 鑼 邏‼️ 腹蠡 ら らえり

Also he damaged the bearing by hitting it on the inner circle

@@user-bd3dt2yy9j nó cứ sự

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bDDRl1nKFJk.html Water Pump Restoration

Так чисто случайно нашел. Пила даже в землю невросла:)

@@asderge они её месяц поливали солёной водой.

Фигня!Я титаник на ставке нашел,ото да!

Это все фигня. Иду я как - то по лесу, в форме лесника, вижу мужики дрова пилят. Я к ним ближе подхожу, а они бежать от меня. Так теперь у меня две пилы хускварна 365 и штиль 180

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bDDRl1nKFJk.html Water Pump Restoration

I have don a detailed restoration video in my youtube channel "Workshop media"

Same lol

@@hasanthasasika3685 ㄱㅁ기긐 .??ㅡ.◎△◆≠∫££ ㅊ차

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c5lnmOqqfZg.html