0:00
Hello, we currently have 680 subscribers. I would be grateful if you could comment or press the good button. This time we will restore the generator that was dirty with paint, overhaul the engine and paint the exterior.
0:55
The muffler outlet is equipped with a "Sparester", which prevents "sparks" from coming out of the engine and requires regular cleaning.
1:51
The generator came off easily, but if it is stiff, use an existing screw thread or slide hammer to remove it.
2:10
Water is mixed in the carburetor, so clean the inside.
3:09
Since the engine gets hot, apply heat resistant paint.
3:50
The piston rings have their order and direction, so please refer to my past videos as well. The ring openings prevent compression leaks that slide 120 degrees.
4:19
Align the matching mark (circle) of the compression top dead center of the crankshaft and camshaft, and the dent on the camshaft is the part where the weight is changed and the centering (balance) is taken.
4:25
Apply "rubber grease" to the contact surface between the crankshaft and the oil seal.
6:55
Press-fitting the bearing changes where the force is applied when the shaft is "inside / outside", and if pressure is applied to the wrong place, the bearing will be damaged.
8:47
Apply a chemical that removes the existing paint, and sandpaper is smoothed by doubling the count from the smallest number.
9:01
Since the base is uneven, prepare it with a primer surfacer. You can change the thickness of the coating film by changing the dilution rate of thinner.
9:17
Water-polish with water-resistant paper. Trace the paint film on the opposite side of your dominant hand to see small irregularities.
10:38
Use an inverter generator to power precision machinery such as personal computers. Standard generators are inexpensive but may damage precision machinery.
Suitable for products with a simple structure such as hammer drills and grinders.
Originally, we could make a larger "shaved ice", but we made a small one because children couldn't eat it.
Thank you for watching and subscribe to our channel.
#Details in the summary section
#Generator
#Restoration
29 июл 2021