Тёмный

Restoring a Cheap Audi TT - pt 4: Boost Issues and PCV Removal 

Valve Auto
Подписаться 2 тыс.
Просмотров 6 тыс.
50% 1

Welcome back to our channel! In this episode of our Audi TT restoration project, we're tackling some boost issues that have been plaguing the car. We'll show you how we diagnose the problem and walk you through the process of removing the PCV and fitting a catch can to help prevent future issues. As always, we'll share our tips and tricks for working on cars and give you a behind-the-scenes look at the challenges and triumphs of car restoration. Join us as we work to bring this old Audi TT back to life, one step at a time. Don't forget to like and subscribe to our channel for more updates on this project and other car-related content!
Follow Me:
Instagram: totalrebuilds_official
#carrestoration #AudiTT #cheapcar #carrepair #boostissues #PCVremoval #catchcan #carproblems #carfix #carvlog #carproject #carrestorationproject #carrestorationvideos #carrestorationtips #carrestoration101 #carrestorationcommunity #carrestorationtime #carrestorationlife #carrestorationlove #carrestorationgoals #carrestorationinspiration #carrestorationjourney #carrestorationprogress #carrestorationupdate #carrestorationseries #carrestorationadventure #carrestorationfun #carrestorationchallenge #carrestorationenthusiast #carrestorationpassion #carrestorationexperience

Авто/Мото

Опубликовано:

 

16 мар 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 29   
@ThemoviesorgymanDstuff
@ThemoviesorgymanDstuff Месяц назад
Excellent video mate! Clear explanation. I got pretty much all I needed from this & got a couple clear screen shots
@valveauto
@valveauto Месяц назад
Glad you found it useful thanks for following.
@xo7966
@xo7966 Год назад
The max PSI is 15psi on a stock tune for the 225. Depending on what diverter you have, it can fail in few different ways, If it's a spring type (after market) it will either seize open or close. If it seizes open you will build little to no boost. If it seizes closed you will be dumping excess boost into the compressor wheel and you will hear alot of turbo flutter. If you have the diaphram style and if fails (tears) you will have issues hitting peak boost and holding. If you have a vacuum leak and you don't have a pump or smoke tester go ahead and replace anything that looks crusty. It's seems to me like your car may be flashed. If you were over boosting (20psi) you would hit boost cut, and the car will go into limp mode, and you won't be able to boost past 5 psi. Also, you should have between about 20 inches of vacuum. Check the hard line for the break booster and the black vacuum check valves as well.
@911Audits
@911Audits День назад
I was able to get into my pcv and replace that breather tube off the case without removing anything. When yhe enhines cold you can snake youre way in there. On the longitudinal mount. Looks like this ones even easier.
@valveauto
@valveauto День назад
@@911Audits I’ve got short fat fingers 😂😂😂
@RS-ci3eu
@RS-ci3eu Год назад
Tidy work! That boost to 20psi does seem wild! I have every faith you'll find the issue. Didn't realise you were planning on going to the ring with it one day, can't wait to see it all built up slapping round the nordschleife!
@flippingcars101
@flippingcars101 Год назад
Good video and very clean work, keep up the good work
@Al-qv5vs
@Al-qv5vs Год назад
Good video. Good info. Thinking of doing the catch can mod mysel.
@tots_mk1_225
@tots_mk1_225 9 месяцев назад
Around 15 PSI max is correct for standard 225, mine peaks at 15 (probably just under as the gauge probably is 100% accurate).
@julesmatthews2178
@julesmatthews2178 Год назад
Just for reference if it boosts strong I suggest it’s possibly got a stage 1 map.. stock 225s are flat 👍
@keithriley3159
@keithriley3159 4 месяца назад
Oh wow ! I only live around the corner from you, have you seen a silver TT in the village, thats me.
@valveauto
@valveauto 4 месяца назад
Ah yea I’ve seen it 👍
@keithriley3159
@keithriley3159 4 месяца назад
@@valveauto I’m having occasional boost issues that I need to investigate. That’s how I ended up watching your video 👍
@valveauto
@valveauto 4 месяца назад
If you get stuck ping me
@keithriley3159
@keithriley3159 4 месяца назад
@@valveauto thanks, I’ve just got to be arsed to sort it out 😂
@julesmatthews2178
@julesmatthews2178 Год назад
Have you got any warning lights on the dash? And also Have you got a smooth idle ? Ideally you need to run VCDS it will bring any codes up 👍
@julesmatthews2178
@julesmatthews2178 Год назад
@@valveauto eml could be a 02 sensor going bad there’s 2 on 225s .if it is always buy BOSCH sensors nothing else .
@julesmatthews2178
@julesmatthews2178 Год назад
@@valveauto esp light could be a few things MAF sensor brake pressure sensor ABS sensor . If you plug it into a diagnostic tool it will tell you And cylinder 2 could be a faulty coil pack .. check for any oil around the rocker gasket as there very common to leak 👍
@julesmatthews2178
@julesmatthews2178 Год назад
@@valveauto that snapped plastic crank case breather on yours it’s very common for that part to fail .. give us shout if you need any advice 👍
@julesmatthews2178
@julesmatthews2178 Год назад
@@valveauto also check the half moon seal that can be done same time as rocker gasket .. something else too that leaks that’s the seals on the injectors 👍
@julesmatthews2178
@julesmatthews2178 Год назад
@@valveauto the injector seals are only made of rubber. There tiny think there’s 2 seals per injector 👍
@andrewmilner2438
@andrewmilner2438 7 месяцев назад
Which pillar mount is best for my tt 2003 ? Would send a link for the one like yours ?
@gregr3283
@gregr3283 6 месяцев назад
Yes you didn't say anything about the mount.
@valveauto
@valveauto 6 месяцев назад
Mintice 2 Inch 52 mm Universal Side Single Hole Gauge Pod Holder Gauge Mount Bracket Instrument Holder amzn.eu/d/9d9f4OK
@valveauto
@valveauto 6 месяцев назад
@valveauto apologies YT has removed all my responses for some reason.
@willcarson5444
@willcarson5444 Год назад
Acid test !!! Could you explain please?
@DrCrazyAzz
@DrCrazyAzz 8 месяцев назад
What is the acid test with the oil filer cap?
@DrCrazyAzz
@DrCrazyAzz 8 месяцев назад
Thanks bud, so its should be sucking in?@@valveauto
@DrCrazyAzz
@DrCrazyAzz 8 месяцев назад
Thanks for the reply and the content.@@valveauto
Далее
How To Fix A Boost Problem Audi TT S3 1.8T
20:27
Просмотров 101 тыс.
Нашли Краша Младшей Сестры !
23:46
[RU] Winline EPIC Standoff 2 Major | Group Stage - Day 2
9:32:40
ULTIMATE SAI/N249/PCV/EVAP DELETE on the 1.8t Beetle!
12:09
Audi TT Pcv System Walk Through
15:25
Просмотров 35 тыс.
Changing the PCV system on a Audi TT mk1 - Part 10
22:54
My Process To Find 1.8T Boost Leaks Fast! |  & New TIP
14:11
ГЕЛИК из ДЕРЕВА!🌳 #shorts
0:37
Просмотров 2,4 млн
Агрессивный обочечник!
0:33
Просмотров 271 тыс.