Restoring an anvil, Resurfacing an Anvil, Anvil Restoration

Подписаться 7 тыс.

Просмотров 7 тыс.

50% 1

Restoring an anvil, Resurfacing an Anvil, Anvil Restoration
G'day Everyone and welcome back to the channel.
Today I am doing an Old Anvil Restoration. My old anvil has an uneven face that is giving me trouble so I am showing How to flatten an anvil, Resurface Anvil, Repair Anvil, Surface Grind Anvil.
Thank you for watching
Also, sometimes I link Amazon Affiliate links in the description. Shopping from these links supports our channel with a small commission without any additional cost to you! So Thank you for using these links!
Equipment I use
Australian Links
Cleco clamps amzn.to/3l6pL2I
Cleco Pliers amzn.to/3iREI6a
G flex Epoxy amzn.to/3zPYAh3
Lansky Diamond stones amzn.to/3CNEVAn
USA Links
Cleco clamps amzn.to/3x4kpri
Cleco Pliers amzn.to/37bDiP1
G flex Epoxy amzn.to/2LNCY1g
Lansky Diamond stones amzn.to/3xPzNZ6
Any questions that you have about custom knives or smithing feel free to contact me via:
Email
mailto:darren@downunderfarmandforge.com
Webpage
downunderfarma...
Facebook
/ downunderfarmandforge
Disclaimer:
The use of Power, gas, fire, electrical tools and devices can be dangerous, please seek professional training before undertaking to do so.
Any tools or techniques shown hers are purely as I do it and for illustration purposes only, they are not professional training and should not be considered so.

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@paulorchard7960 2 года назад

Really nice job, was wondering how long it would be before you brought out the belt sander! Unusual anvil with the big hole in the horn step!

@DownunderFarmandForge 2 года назад

Thanks Paul, the belt sander is a lot slower so doesn’t work as well on the ceramic belt, but does work well for flattening the top. From what I have read the hole in the cutting deck is to have a replaceable plate in there.

@Wheresbibby 2 года назад

Daz the builder can we fix it lol…

@DownunderFarmandForge 2 года назад

Catchy thumbnail 😉

@RandWFarmstead-TonyWalsh 2 года назад

Interesting process Darren, thanks for sharing. Hope you are doing well and hope to see you again sometime. Take care and have a blessed rest of the week my friend.

@DownunderFarmandForge 2 года назад

Lol a long process Tony. Just trying to get a few things in place, then will be booking the next trip over. Will be swinging past James Ang Ang’s place again as we need to take care of Bacon while there. You have a blessed week mate biggest weekend of the year is coming.

@vishnumv2398 2 года назад

@DownunderFarmandForge 2 года назад

Thanks for watching

@MBHeritageFarms 2 года назад

End result looks great, how often would one have to do this to an anvil?

@DownunderFarmandForge 2 года назад

Only about every 100 years on an old one like this mate

@jennjohnson-richards5829 2 года назад

Cool! I've always wondered if this could be done. Too many hours watching anvils drop on Wile E Coyote, I suppose 🤣

@DownunderFarmandForge 2 года назад

Lol they are a little more expensive when not from Acme🤣. A lot of people don’t like to alter the face on them because of the age with one like mine, it would be an antique, but because it is a tool that I use not a garden ornament I much prefer to bring her back into good working order.

@marcuscicero9587 Год назад

didn't look so bad until you put a straight edge on it. you put a lot of work into this straightening. wanting something nice provided you with great motivation.

@DownunderFarmandForge Год назад

Yep harder to see by the naked eye, but when you are forging it makes a huge difference, lots harder to make tapers or even forgings with that hollow hiding in there. So much better now with it straightened out.