I’m really close i think, i’ve got the transcoder and i’ve got an hd5450 and a 3080 in my main rig.. the calamity guide is a little confusing for me as he’s using an svga monitor to set it up and windows 7 i think.. i have a 4k tv and wega trinitron with windows 10..stuck using an hdmi to ypbpr converter right now. Please help!
@@VAMPIREMACHIINE yea i did, im stuck at the part where i need to do vmmaker.. calamity’s guide says after restart his res changed to 1024x768, but that doesnt apply to me since im setting it up on my 4k.. so im just confused when do i need to plug on my crt to my hd5450?
@@VAMPIREMACHIINE i’m setting it up on my 4k monitor is what im saying, with the hdmi out from my 3080, so vmmaker doesnt detect the hd5450 i think because it’s not outputting anything.. hope that makes sense. Sorry if im being confusing.. appreciate your time man
@@00-Diesel oh i see, so to enable the 15khz output on your 5450, you have to have a vga cable coming out of your 5450 to a pc monitor/tv with vga input (outputting 1080p/4k whatever) then you open Video Mode Maker. Then in the “Monitor Settings Tab” Set the Type Dropdown to NTSC TV -60 Hz/525. Then go to “Video Card Tab” Device Dropdown will be AMD Radeon HD 5450 NTSC Enabled, Then set the “Output Drop Down” to Analog 0-VGA, click on Enable EDID emulation. At this point you should lose the signal on your pc monitor, which is good. Then you would unplug the vga cable from your 4k monitor and plug it into your transcoder and you should get a 640x480i image on your crt. Once you’re there let me know.