If your reversing lights do not light up or are always on, check this video. Troubleshoot and repair ! Wiring testing, reversing lights testing, switch replacement.
What if only 1 light is not turning on? Should I check the wiring on that side? It looks normal (by checking in the trunk) and nothing could have messed with it. Thanks for your video!
c'est vraiment génial, j'habite en belgique , je étudié la mécanique pour deux ans et puis j’étais exclus a cause de manque de papier... vos tutos sont génial, plusieurs profs, ne sont pas à la hauteur d’enseigner! ils bascule entre la ignorance et le racisme!
I have a ford focus 2003 mk1 . All of a sudden my reverse light stopped working after checking all my lights I also found the rear fog light does not work either. I have checked and changed bulbs . Checked and changed all appropriate fuses. Even had it into a garage this morning thinking it could be the reverse light switch on the gearbox they said that it was fine . I've taken out the light sockets and gently scraped off any and all corrosion. I've checked the grounds and they are fine . Also checked the wiring that all seems to be fine too. Anybody have any ideas .
Hi there whats the cause of your gears not shifting after replacing the reverse switch, the bulbs were good the fuses were fine changed the switch and then the gears would not shift and was stuck in reverse
mine keeps blowing the fuse when engage in reverse and no power in the reverse light when checked by multimeter and the wires has no visible damage. Is it the reverse switch?
hi, my reverse light problem is only when i try to use an LED bulb on both reverse light, the light stays on and the reverse sensors also stays on. This does not happen if i use the original bulb/halogen bulb, only on LED bulb. What could cause this if anyone faced this before? Idk if its the switch because it works normally on halogen bulb. Am so confused hahaha
