Review 2000 Chevrolet Blazer The Good The Bad The Ugly 

Enjoy it! I really miss my blazer.

Ck out my reply to his issues many years of s10 builds.

Picking up my 2000 blazer LT with only 90,000ml this Sunday. I’m stoked

That's really low miles congrats!

Huber's Ranch got it from a dude that owns an American car garage so it’s impeccable. I’m glad. Thanks for the detailed video man

Yea great engine 4.3

Good luck!

NICE S10 LT BLAZER BROTHER!

I have a 2000 GMC jimmy SLS 4x4.

Glad to hear it! Hope you enjoy the Blazer!

For cylinder #3 spark plug, I just had to pull the rubber sleeve off the steering linkage and turn the wheel a certain way, then it was just a basic U-joint!

The door panels are SO ANNOYING too. I had to fix the screw mounts with JB Weld on front and passenger door! All the clips are cheap and don't stay connected.

Thanks man, I think I've been in Europe too long and I am loosing or have lost my US accent. No matter how many things that annoyed me about the truck I loved it still.

Huber's Ranch hahaha yes they grow on you overtime can't beat the fact that it tanks thru snow with little issue

I think if engineers actually had to work on any vehicles things would look a lot different 🤣

Thanks!

Thank you!

The transmission gave out on me back in may so at this point its a 4000lbs paper weight 🙂

Yeah I'm currently over here. But I purchased the Blazer in Illinois and shipped it over here when I moved here.

Cause I no longer have the truck as the transmission failed and I moved from Switzerland to the USA there was no point in taking the truck back with me.

Sorry man I don't have the truck anymore, however it was the GoRhino Hitch Step made out of 3" steel tubing powder coated in black. Definitely worth it, not so much as a step since the stock Blazer isn't that high but as protection from backing into things or someone backing into you. I've had people back into me and hit the hitch step and instead of damaging the bumper the step takes the hit which IMO is much cheaper and easier to replace. It held up rather well, but like all mass produced powder coated pieces it will start too fail around the edges where the caps are as it is a hollow tube, there are plastic end-caps there. That is where it started to rust. I just used a rust-oleom style paint every year to keep it going and it was still on the truck when I sold it this year. I will absolutely get another one of those steps for the next truck I get, I'm just waiting to find the right one know that I moved to the US again. If you live in a rust area you will have to also keep an eye out on the bolt that holds it in place , there is the normal pin that goes through the trailer hitch and then it also has like a little plate and turn screw on the bottom to keep it from wobbeling up and down. Mine rusted in place after several years since I never used my hitch and I would have had to cut that bolt and plate off if I ever wanted to use the hitch again. I hope this helps.

@@HubersRanch that sucks you don't have it no more but it sure does help. I just recently got my actual drivers license and also got a 99 blazer Ls at the beginning of November but it's been sitting lately because it need some work. But I'm putting a new distributor in today so it should be go to drive today hopefully and Merry Christmas to you and your family!

@@dustinw.2001 Thanks, I hope you have a lot of fun with your Blazer, they are great vehicles, I loved mine, but the trans blew and I found out I would move to the USA so there was no point in fixing it. Merry Christmas to you and your family also and if you have any questions feel free to ask I still try to answer as many as I can.

@@HubersRanch I sure will. I couldnt quite fix mine today but it'll be ready to go maybe tomorrow

I got it going!!! I'm happy now had to pit the new distributor in, a bypass pulley and belt for the ac compressor and new wipers.

How much did you pay for it? Im looling a one with pretty similar conditions, and what to konw if I'm getting a fair price.

Gumaro Leija Barbosa I payed 950 for mine

@@blgarage9519 Wow, great deal. Thanks, that helped me a lot.

Here's the easiest way to fix it by using epoxy and some dampening mats you can kind of get rid of the squeak but unfortunately the interior of those things was so cheaply made it's kind of hard.I'm actually in the process right now replacing my driver's side interior panel because it's totally fucked up from someone trying to change a lock...

Good luck!

Thanks! I'll try to get some more. General truck or specific repair videos?

You could test drive of your truck

Too you should also put a led bar

It was a generic one off of ebay. I don't remember the brand but it was like 350$ back in 2007. I just searched for "2000 Chevy Blazer Brush guard"

@@HubersRanch Do you still have this truck yes or no

@@martinneps9387 He said earlier that he longer has the truck.

Yes, Switzerland uses road salt.

Yes I did.

When I still lived in Switzerland there was a local company that could get a lot of parts. But often times it was cheaper to go on E-Bay and use the Global Shipping program or if I was buying in bulk I would go to Rockauto as they also ship world wide.

Huber's Ranch I see! Thanks a lot! The thing is that I live in Spain and i went to see a Blazer today in good condition but the pain work and body is a bit scratched since the previous owner used to take it off roading. The shop has 2 blazers, one that works and one that doesn’t work but has a lot of parts that work and said that if i paid €3000 he would give me the other blazer for free to use it for parts. Does it sound like a good deal?

It really all depends on the km and the condition of the Blazers and of course what specs it has. LS / LT, 4 door / 2 Door etc. But in all If they are both bellow 200k km and four doors and in decent shape (paint can be buffed) I would say 3000€ seems like a decent price for both of them. You can always try to get him to like 2800€ or something :)

Huber's Ranch Yes. They were both LT with full leather interior, heated seats, power windows, power sun roof, automatic gear box, the different 4x4 and 4x2 modes, power lumbar support, ac worked fine and both around 2001-2002. But i didn’t check the mileage unfortunately. Will request more info when i can. Did a test drive and had lots of power and was incredibly incredibly smooth. My parents drive the Porsche Macan S so i am used to a smooth ride, but the blazer was great in ride comfort.

Well sounds good to me. Just ask what's broken with the 2nd one that it's not operable anymore, engine or transmission. Then you know what kind of major parts you have spare form the second one. Cause most expensive to replace would be the Engine or the Transmission if it where to go out ever. But yes they do run smooth :)

It was ebay. I don't remember the brand, I don't think it even was a brand name one.

@@HubersRanch thanks bro

Because I took it with me when I moved back from Illinois to Switzerland. Right now I live in Colorado.

That is for the onStar system back when it was still really new and analog. It didn't work anymore because GM switched to a digital system but I just left everything in place.

I'm looking to buy one but the poor ball joint design and transmission issues are keeping me cautious about the SUV.

Yes

How because I got a the same year truck and we couldn’t figure out how

Depends on the guard you get, the one I had mounted from the bottom to where then the bumper is mounted to the truck. Look for the video of me removing it to paint it in my channel will give you a better idea of how it was attached.

Some like it , some hate it 🤷‍♀️

That reply ain't English either but Ight

@@HubersRanch How’s that not English lmao.

You don't use "ain't " and "ight" isn't a word. Unlike the S10 Blazer which js based off the S10 Pickup truck, wich makes it a truck. Same as a tahoe and a suburban were trucks as they came from the silverado platform.

@@HubersRanch it’s called slang and if it doesn’t have a bed it isn’t a truck in my opinion it’s a suv

@@HubersRanch Do I sea some diliberite flaws whith yer spelingg? lol BTW, I bought a 2000 Blazer back in February or March. It needed a front differential replacement, but after I got that done, I love it!