Thank you. I plan to use it primarily for the neat little finishing brad/nails (for crafting also). I couldn't figure out why they weren't firing. You helped me to figure out how to load them. I was doing it All wrong. You helped me finish installing a patch for the front door where a little window used to be. Thanks again. (c=
Borrowed this from my mom who does upholstery to do an attic insulation job. Thought I would kill the poor little thing but it performed like a champ! Never would have believed it if I hadn't used it, bought one of my own.
I noticed you used 2 hands, I'm recovering dinning chairs with heavy fabric. I need to be able to pull fabric tight with all my strength and have an easy time with the weight and ease of the stapler. Do you think this will work for me
Bought the stapler. There is an awkward delay in the time the trigger is pressed and when the staple is released. I’m getting a staple ejected with ever 3-4 trigger activation. Frustration. Hits?
There is a little piece that sticks out where the staples come out. I believe this is some sort of safety mechanism, you need to push that down until you hear a click and then you’ll be good to staple! I had the same problem but it works perfectly after you hear the click
Check three things: make sure you are plugged into a power source, the staples are properly loaded and the trigger is pulling. If those are all checked, exchange it. There may be a problem with that particular staple gun.
Hi Charles! I’m not aware that it shoots brads. I’ve only used it as a heavy duty stapler. I’ll reach out to the folks at Arrow for a response. In the meantime: Happy New Year!