Тёмный

Reviewing The Mammoth Chronicles Kickstarter | DnD 5e 3D Printed Minis & Adventures 

Rybonator
Подписаться 202 тыс.
Просмотров 11 тыс.
50% 1

I love it when my buddies make companies/stuff, because then I get to show them off! Aaand THEN I get to break them when I roll them on my table... :)
CHECK OUT THEIR KICKSTARTER HERE! (Also for transparency sake, I make a small commission if you do end up supporting their kickstarter using this link. Don't feel obligated, but just thought you should know :) ) www.kickstarte...
View ALL minis in the KS: media/set/?set=a.174096905013169
Also check out Arcaest Games - www.etsy.com/s... - he printed my minis in record time!
Support the channel and earn some amazing perks on Patreon! / rybonator
Join the Dice Goblin Discord! / discord
If you like twitter, I got one! / rybonator1
I also have an Instagram! / dm_rybonator
If you want to mail me something, here is my Private Mailbox Address, so you can send me stuff to look at. I can't promise that I'll review them, but I'd love to see what you make! (Or just tweet me pictures if you make something, that's nice too!)
Rybonator
3515 Longmire Dr., STE B PMB 277
College Station, Texas 77845
If you have any ideas for what you would like to see built/reviewed in the future, let me know in the comments down below! Then subscribe so you don't miss any new videos coming out in the future! Also, if you liked this, gimme that sweet sweet like.

Опубликовано:

 

28 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 59   
@Rybonator
@Rybonator 2 года назад
Another review, another durability test. I'm a simple man with simple pleasures :) Go check out the Mammoth Factory KS, and thanks again to Arcaestgames for getting these printed for me so quickly! SORRY I HAD TO THROW THEM BUD
@333Liger
@333Liger 2 года назад
I Can't Believe You Broke Them You Really Should Be Ashamed They Looked Amazing Until You Dropped Them... But I Hope They Turn Out Good In The End...
@johnjacobjingleheimerschmi9997
@johnjacobjingleheimerschmi9997 2 года назад
Instead of printing solely in Elegoo Grey, or another basic resin, mix a 50/50 batch of your favorite simple resin and Siraya Tenacious. It only adds a slight expense per model and you can fling them at the wall without them breaking.
@jettadin
@jettadin 2 года назад
Full disclosure but the durability rating is actually really useful when you're like me and terrified of handling anything "delicate" for fear of breaking them, so even if they can't survive being chucked around like a sack of flour it's good to know that regular handling won't destroy them!
@veryyelloo4130
@veryyelloo4130 2 года назад
I swear you gave me a pavlov reaction the moment you say skill
@fableagain
@fableagain 2 года назад
If you don't glue the big guy down to the base, it's probably even more durable. Even if you do drop him, he'll just pop right off. It lowers the chances of the legs breaking off in such a situation.
@coltonbench2549
@coltonbench2549 Год назад
Minis look amazing. One thing, was I the only one confused when he mentioned that the blue ground made it feel very Martian? I thought Mars was red.....am I missing an inside joke?
@Ag3nt27
@Ag3nt27 2 года назад
Cool
@Rybonator
@Rybonator 2 года назад
Sweet
@jdgreen95
@jdgreen95 2 года назад
Dropping minis... you monster...
@gay_anxiety9669
@gay_anxiety9669 2 года назад
Is it possible to make dice with mirror shards in it? If so could you make some I wanna see how it would turn out
@NathanBest
@NathanBest 2 года назад
I'm glad that they got to you in time! I almost had a heart attack when you dropped them!!! 😬
@Rybonator
@Rybonator 2 года назад
Thanks for getting them to me bud! Sorry I had to do them dirty like that. But even on a repair, they look great!
@Danielmchanderson
@Danielmchanderson 2 года назад
A day with a rybanator upload is a good day
@Rybonator
@Rybonator 2 года назад
Thanks Spawnmas :) That made me smile
@Danielmchanderson
@Danielmchanderson 2 года назад
@@Rybonator keep it up man I don’t always comment but I always enjoy every video
@doomer17o
@doomer17o 2 года назад
A day with a Rybonator upload about minis is a great day
@arcaestgames
@arcaestgames 2 года назад
Thanks for the shout out! We had the same issue when printing them the first time using printers that were dialed in for other minis... It took a few rounds of bad prints and testing to finally get them dialed in (basically slowing down the lift speed to a crawl when pulling them off the fep). The supports are so small that it makes it tough to print, but an absolute dream when it comes to clean up 🥰
@Rybonator
@Rybonator 2 года назад
Maybe I was going too fast with stuff. They look fantastic! So no complaints on the end result :) Thanks for the super fast help!
@QuizMasterEntertainment
@QuizMasterEntertainment 2 года назад
Who doesn't love some good old alien eldritch horror, huh? The prints look awesome, but I honestly just lack a good place to store them in.
@Rybonator
@Rybonator 2 года назад
Right? I definitely lost enough space a long time ago, and now keep a lot of prints in a bin. The good stuff I shelve :)
@stephenthomas8312
@stephenthomas8312 2 года назад
Had to beat Amber this time. Kind of surprised as the service in the hangar is kinda non-existent. Oh well. Can't wait to watch when I get off! Thanks for more content!
@Rybonator
@Rybonator 2 года назад
Thanks for always racing to watch it :D
@edwardgiogi
@edwardgiogi 2 года назад
I have found the brittleness of minis is more based on the strength of the resin I typically used. I changed to a stronger resin (specifically Anycubic UV Tough Resin) and I don't have problems anymore. Also just wanted to take the opportunity to say thank you for all the content you have put out. I really enjoy watching your channel.
@Rybonator
@Rybonator 2 года назад
Thank you Edward, I appreciate that a lot. Makes me glad that you enjoy them :) Yeah I'm sure I could go for majorly durable prints, but honestly the mini was so large, it'd have to be CRAZY strong haha
@hyperguyver2
@hyperguyver2 2 года назад
You can also add tenacious flexible resin to make them more durable
@EFergDindrane
@EFergDindrane 2 года назад
Those are huge and gorgeous. I love the detail!
@Rybonator
@Rybonator 2 года назад
Right? Crazy how much musculature can be seen in these bad boys
@TaylehAwondras
@TaylehAwondras 2 года назад
My heart when you dropped them.
@Rybonator
@Rybonator 2 года назад
It has to be done. For science
@energized_k
@energized_k 2 года назад
When you dropped the big one my heart broke as well 😭
@Rybonator
@Rybonator 2 года назад
We must steel our hearts in order to advance science in the proper direction
@ZanarCrestrider
@ZanarCrestrider 2 года назад
Yay for video! Bummer on the printers being moody though.
@Magikarp_king
@Magikarp_king 2 года назад
Rybonator gets minis. Happy birthday to the ground!
@Rybonator
@Rybonator 2 года назад
A free hot dog? Whatchu want me to do with this? Eat it!? HAPPY BIRTHDAY TO THE GROUND!
@amberstar7530
@amberstar7530 2 года назад
Yay more content and I may add he only beat me because I’m working :p
@franstratos
@franstratos 2 года назад
i'd reeeeeaaaally like to see some paint job on that Hunt Master.
@hunterpowers2568
@hunterpowers2568 2 года назад
Ooooooh large “minis” they look awesome
@Rybonator
@Rybonator 2 года назад
MEGA MINIS :D
@hunterpowers2568
@hunterpowers2568 2 года назад
@@Rybonator YEAH!
@stephenthomas8312
@stephenthomas8312 2 года назад
YES A MINI REVIEW
@Rybonator
@Rybonator 2 года назад
NEED MORE MINIS
@stephenthomas8312
@stephenthomas8312 2 года назад
@@Rybonator we're both addicted to minis *and* shiny math rocks now lol
@quest900
@quest900 2 года назад
I'm all in, these minis are sick!
@stephanienoire1892
@stephanienoire1892 2 года назад
yaaaay more rybonator!!! 😀
@Rybonator
@Rybonator 2 года назад
Glad you like my stuff :) Thanks Stephanie!
@bolicob
@bolicob 2 года назад
You should make a DM prop making or review video. Seems like something that would fit well in this channel
@asv4k8
@asv4k8 Год назад
The base of that hunt master should be printed in clear red, then painted grey, allowing led light to shine through the letters on the base.... do a video on that, embed the led light too!
@fableagain
@fableagain 2 года назад
Time to turn on notifications because youtube has decided to just not show me any of Rybonator's videos the last few months. I just realised it.
@nootnootman6353
@nootnootman6353 2 года назад
noot noot
@Rybonator
@Rybonator 2 года назад
Noot!
@HeartOfJade
@HeartOfJade 2 года назад
please make bean dice i wont ask again i promise
@tomcollick8111
@tomcollick8111 2 года назад
Any idea the breush types and sizes needed to begin painting miniatures?
@SuouEtsumi
@SuouEtsumi 2 года назад
Ah yes, Blue, famously the colour of Mars
@timothybrown583
@timothybrown583 2 года назад
You should show us how to make loaded/weighted dice
@makewithmegma
@makewithmegma 2 года назад
🔥💕👍
@Natureboy224
@Natureboy224 2 года назад
Good evening.
@cathyb7774
@cathyb7774 2 года назад
Your durability test is shockingly amazing and somehow as you mentioned "Falldamage" my silly brain thought of their weakpoints are their Breakmarks. Like Achilles you know. Would be a "surprised Pikachu face"-moment when the BBG survives a heck load and then stumbles (or gets a bolt to his shin) and his hit points drop like ice cream in the sun. Love this Video and the miniatures are gorgeous
@LucretiaPearl
@LucretiaPearl 2 года назад
You're right, they look soooo cool! The detail is fantastic! Definitely would love to see them all painted up in your preferred style in the future. And heck, durability tests & repairability tests are great for klutzes like myself, so I'd say, good work as always Rybo.
Далее
Making My Most Requested Dice - Ramen Noodle Dice!
9:13
Why Change the Number Color of Your Dice? | Re-Inking
10:51
Hollow Metal Mindflayer Dice | DnDWOW Product Review
7:42
Heimdallr Metal Dice Review
11:15
Просмотров 30 тыс.
D&D Story: How 1 WORD Almost Killed Everyone...
11:20
Просмотров 549 тыс.
Miniature Market Clearance Unboxing
8:39
Просмотров 3 тыс.
Staff Slings - YOU! can make one
18:04
Просмотров 455 тыс.
Dungeons and Dragons Lore: Aboleths Revealed
15:17
Просмотров 630 тыс.
Making Destiny 2 (Warlock) Dice For My Buddy
8:56
Просмотров 30 тыс.