Revopoint POP3 VS Inspire 3D Scanner - How Do They Compare?

Подписаться 166 тыс.

Просмотров 10 тыс.

50% 1

In this video I'll be comparing the Revopoint Pop3 3d scanner to their newest Inspire 3d scanner. Both of them are great tools to use for 3d scanning and compare very similarly to each other. While the Pop3 has a few extra features and the scanning accuracy is slightly better, the Inspire has a price tag which is currently almost half the cost of the Pop3. In this video I'll demonstrate scanning different objects using both of the 3d scanners and you'll see for yourself how the results are almost identical. I did try to keep the settings identical in order to have an accurate comparison, but there are some features which are available to change depending on the situation. If you like this video, please give it a thumbs up and hit that Subscribe button for more.
Make sure to ring the bell to get notified of all my newest videos as they come out so stay tuned.
Thanks For Watching!
#Revopoint #pop3 #Inspire #3DScanner
*********Where To Order**********
-REVOPOINT INSPIRE KICKSTARTER LINK-
revo.ink/43NKmM5
-REVOPOINT POP3 LINK-
shop.revopoint3d.com/ArtByAdrock
$50 Discount Code: ArtByAdrock50
-REVOPOINT OFFICIAL WEBSITE-
www.revopoint3d.com/
******Graphite Molds********
To purchase the graphite molds as seen in my videos, visit my website at www.ArtByAdrock.com
******MERCHANDISE********
Merch is available in my TeeSpring store as well. Help support my channel by picking a T-shirt and more!
teespring.com/stores/artbyadrock
***DISCLAIMER****
This video is for entertainment and educational purposes only. Do not try and replicate this at home unless you know what you are doing. Molten metal and Lasers are extremely hot and dangerous so always use precaution and wear protective gear.
****SOME OF MY OTHER VIDEOS****
Casting A Solid BRONZE Katana & Ingot From Scrap Copper And Tin - Monster Bronze Melt - • Casting A Solid BRONZE...
Melting Aluminum Cans At Home - Easy DIY Recycling Process - • Melting Aluminum Cans ...
Casting A Solid BRONZE Dagger - Athena's GOLDEN Dagger - Full Metal Casting Process - • Casting A Solid BRONZE...
Melting Copper Pipes Into A BRONZE Black Prince Dagger - • Melting Copper Pipes I...
Aluminum Casting Khal Drogo's ARAKH weapon - Game Of Thrones - • Aluminum Casting Khal ...
Bullets To Blades - Casting Double Mini Blades Of Chaos (God Of War) - • Bullets To Blades - Ca...
Aluminum Casting Aquaman's TRIDENT - • Aluminum Casting Aquam...
****SOCIAL MEDIA LINKS****
Instagram: / adrock_702
Twitter: / iamadrock
Website: www.artbyadrock.com

Развлечения

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 26

@ChainsawDNA 10 месяцев назад

Finally, I found this review that is direct to the point. Earned my subscription. Thanks!

@ArtByAdrock 10 месяцев назад

Hey everyone, after testing out both the pop3 and inspire, I have to say they both work great and are very similar although the inspire is currently about half the price. You can also save $50 on the POP3 using the discount code "ArtByAdrock50" at checkout. Enjoy and I’ll see you all in the next one.

@mikevars8979 10 месяцев назад

I got in early on the inspire Kickstarter after watching your video. Glad the inspire compares relatively equally to the pop3 in performance at a far cheeper price point. I look forward to it's arrival. Thanks for a great video.

@krappy_ 2 месяца назад

Thank you, very informative and helpful.

@AnivaleShop 8 месяцев назад

Hello. Thank you for the video. Beetween POP3, Inspire and Ferret, what do you think is best for collecting detail.

@ArtByAdrock 8 месяцев назад

I would probably say the pop3 overall but they are all good. I guess it all depends on what you plan on using them for and your budget.

@juscuro 10 месяцев назад

Almost the same for a fraction or the price, I think I did good by ordering the inspire.

@jdebussc 10 месяцев назад

I have a POP2 and have a lot of issue with my scans producing ghosts, aka version of the model that are shifted over a few mm or degrees. And thus i’m constantly having to watch my scans realtime on my computer so i can pause and backup frames when i start to see a ghosted shape appear (if i don’t do this, all further scanning will latch to the ghosted points instead of the pre-ghosting points). And sometimes the SW goes crazy and a scan just starts ghosting on itself for every frame, such that the point cloud just starts to take off toward infinity. Can I expect the Inspire to not do these things due to some kind of HW improvement? It’s all the sale SW so would have to be a HW improvement I think.

@ArtByAdrock 10 месяцев назад

I still have that same issue here and there but it doesn’t seem that bad if go slowly. Usually once I send it to the point cloud in the software it fixes itself. (But not always 100%) Are you using the latest version of revoscan? I haven’t tried the pop2 so I can’t speak about that model.

@sachacarnelos 5 месяцев назад

When POP3 vs RANGE2 for people scanning? 😊

@brianbirmingham1458 10 месяцев назад

Do the inspire and the pop 3 use different software packages

@ArtByAdrock 10 месяцев назад

No it’s the same software

@user-gt3xz6wo3o 10 месяцев назад

Can this product scan a person’s full body?

@ArtByAdrock 10 месяцев назад

Yes it can. It can be tricky and you have to go slow but totally doable.

@user-gt3xz6wo3o 10 месяцев назад

@@ArtByAdrock Can I scan a person's full body with revopoint inspire ? Can I scan my motorcycle? Approximately how many minutes does it take to complete the scan?

@user-gt3xz6wo3o 10 месяцев назад

@@ArtByAdrockDoes picky mean that it fails during scanning and takes a lot of time to scan again?

@ArtByAdrock 10 месяцев назад

@@user-gt3xz6wo3o no it doesn’t fail, but sometimes you get ghosting if it can’t pick up the points accurately. I always suggest going slow and doing sections at a time. You can go in the software later and merge the scans.

@user-gt3xz6wo3o 10 месяцев назад

@@ArtByAdrockDoes doing sections slowly at a time mean scanning parts of the full body and merging them in the software? Can I trust you and buy Inspire? I am trying to scan full body and motorcycle.

@ashkanhaghighi6726 7 месяцев назад

Wow! They both did very bad. I work as a 3D scanner operator as part of my job for about 4 years now and I can say that the results shown in this video illustrateds that these scanners are very bad. Although the price is affordable, I think they are not worth it.

@erwinschouten379 7 месяцев назад

Well what do you recommend? I mean you work with it professionally so i think you can help us even better. If not i don’t get why you would post a comment like this.

@ashkanhaghighi6726 7 месяцев назад

@@erwinschouten379 In my opinion 3D scanners are getting better and better every day and this is just the beginning of affordable 3D scanners. Now the results are not good but the price is kinda affordable. I think there will be affordable scanners with acceptable results soon.