RF Remote Controlled Moving Head🔥🔥🔥👍🏾No DMX Controller Needed~JMAZ Attco Spot 100 

Thank you

Yes the auto shows are good. It’s bright and well made. I love em. If you’re going to use them with a DMX controller definitely consider the Spot 150 which is 2X as bright and you can control them via the wireless JMAZ dmx controller(no RF though)

4 sho

Will do sir

@@lavishlifedjs I have one more question if the lights work in unison with the RF remote (like Ape Labs) what is the need for the wireless Donners?

@@djjerryg_soundexpressenter5874 good question. You actually could control both lights at the same time with just the RF remote and no donner...the lights are all program the same so if you have it in auto mode 1 it will go through the same exact motion every time you toggle to that particular show. So essentially you can have 2 or more lights do the exact same thing by toggling through the show modes while both or more lights are on. You can do this with the Pan/Tilt inversion on. The main challenge is in sound active mode...unfortunately because the movements are somewhat random, the lights don’t sync up hence the need for the donner. If you don’t care about the lights matching during sound active then you don’t need anything but the RF remote. Hopefully that answered your question ?

@@lavishlifedjs it sure did. That makes perfect sense! Thanks again!

Hello, I just received my lights snd I bought the Donner like you described. Does one light need to be set as master and other slave So I can get it to move in unison especially in music mode (sound active mode)?

The Pan tilt reverse isn’t controlled by the remote so once you set it, it will stay that way regardless of what auto run mode/show mode you put it in

@@lavishlifedjs Thanks Again brother you’ve been very helpful!

@@djjerryg_soundexpressenter5874 anytime bro...let me know how the event goes

@@lavishlifedjs pan/tilt works perfectly thank you so much I love it almost like using a DMX controller which I dislike you to all the extra equipment needed especially after using Ape Labs products.

appreciate the tip

I’ll try...time crunch right now...I got em at KPODJ...I have an insider membership which gives you certain discounts (it’s free to be a member)

Evolves are great for me. Anything 200 and below you’re good...check out the jmix from RCF tho, some people say they have a better sound/bass

Mos def

Not sure…prob need a dmx controller to do that…look in to soundswitch

Thanks. I sold these and don’t quite remember but I have another video after this one explaining the settings

@@lavishlifedjsWhy did you sell them? What did you replace them with ?

Yes if you’re running dmx The beauty about these lights though is you don’t actually need to run dmx to control both at the same time…the remote if used within 30ft of each light will go make the lights go through the same auto programs at the same time so it looks synced

@@lavishlifedjs Right on! Thank you for your reply. .one more question... Have you ever tried linking the Remote Compatible Moving Lights with Non- Remote Moving Heads...same brand. Do you think the Non Remote units will respond?

Yes the remote came with the lights…I bought mine at KPODJ

Yo-yo...so you want to Press menu the up to Auto Run then enter then up to Music Run then enter then select your program then enter...from here you can press the up or down button to select “master” or “alone”...select master for the light you will be plugging in your donner wireless transmitter (the master)...on the other light plug in the receiver and you should be good to go...pro tip: I turned the RF remote off for the slave light to not get the lights confused (if that’s a thing lol)...let me know if that helps...I’ll post a video

@@lavishlifedjs thank you so much. I forgot to turn the non master remote off. Now it works. Also is there a totem mode as I’ll be using only on totems.

@@lavishlifedjs I appreciate it. It works as you suggested. How do you set totem mode?

@@djjerryg_soundexpressenter5874 totem mode is built in to the different show programs except for a few at the end...Toggle through the programs Music mode is the same

Came with the lights when I bought them

I actually sold mine…don’t use moving heads in my lighting setup anymore

Don’t disagree with that at all…I use soundswitch when I don’t want to mess around with a dmx controller if I’m using moving heads Otherwise for 99% of my gigs these days I’m using my arsenal of Ape Labs lights with 1 remote…boom no dmx at all 👍🏾

I have a vid going over the remote

When I got mine the remote control came with the light BTW they em in white now limited supply

@@lavishlifedjs thanks bro.

@@geheri no doubt

Thanks for this correction...you interested in these lights ?

@@lavishlifedjs how do you put them on master slave

I can’t get them to do the same thing

@@jesustirado743 Yo-yo...so you want to Press menu the up to Auto Run then enter then up to Music Run then enter then select your program then enter...from here you can press the up or down button to select “master” or “alone”...select master for the light you will be plugging in your donner wireless transmitter (the master)...on the other light plug in the receiver and you should be good to go...pro tip: I turned the RF remote off for the slave light to not get the lights confused (if that’s a thing lol)...let me know if that helps...I’ll post a video

This was before all the equipment shortages…I actually sold them too…wasn’t really using them…I’m now using wash

@@lavishlifedjs interesting. Which wash are you using now?

@@DreamPrashant I use ape labs maxis…and in large spaces the wash fx 2s

KPODJ

@@lavishlifedjs new or used?

@@jtm71 new

These were dope but I got away in from moving heads and started focusing on Wash lights…I am thinking about the aero washes tho

Are they good am interested in buying a pair

@@devonmathison4507 they are great…they have the 150s too which I think are much brighter and have some killer festures

@@lavishlifedjs ok thanks a lot

Is this still good or do you have any other suggestions. Great demonstration!

You got em ?

Yeah I did this afternoon ...not happy for them ...

Going to return tomorrow ..not for me ..build quality was on point

I was expecting closed to adj focus spot 4z lol ..

@@jesustirado743 maybe the spot 150 is better ?