❤️❤️❤️ brilliant, exactly what I needed to find. 💎💎💎 First, I learnt where the socket box is located Second, how to use it and fix the problems by the use of the software. ❤️❤️❤️🙏🙏🙏❤️❤️❤️ Can I use this code reader for my Mercedes Benz 124T 300E from 1989 benzin it is not a disel? Any answer is helpful. Stay safe and blessings from Germany
do you know anything about reprogramming the ecm I had wrecked my 94 500 sl we had bought a parts car a92 sl500 so my husband decided to make parts car my driver unfortunately the ignition and the trunk ignition was damaged beyond use so he swapped ignition from 94 to 92 the car turs over but wont start ughhhh
@@fritzjrundhaug81 www.mercedescodereader.com for purchase. However I only ship in the USA now. Our USPS raised their rates and overseas shipping with delivery confirmation and tracking is over $25. Rick
Hi nice video, I made my own blinkreader and literally nothing happens w the led on any occassion even though it was tested to light up w a 9v battery just before, any suggestions? w124 200E 1995*
@@ricksmercedesobd1diagnosti332 thank you...actually my problem is the ABS light still on after the engine start....is there any part of this methode can solve the problem?
@@stephenkoko639 try to change the module @ the torpedowall backside of battery, forgot the name of it, red top...had the same issue and it solved the problem.
Go to my website and download the PDF code file. It has the connections in a picture. The 8 port doesn't have a positive so you need to use the battery. #1 hole is ground or you can use any ground. Thanks, Rick .www.mercedescodereader.com/files.html
@@RicardoMartinez-kr5qk - You mean hot as in positive voltage or the code reader light turns on immediately? Have never seen voltage on the 8 socket. If the code reader light turns on by itself there is a stuck solenoid or relay on that system allowing phantom voltage to pass. Repair the faulty part finding it can take some time since the code reader can't tell where to start.
Sorry for the confusion Rick, i thought i was getting battery voltage at port 3 but im not. What is happening is that the light on the code reader comes on as soon as i touch the red to battery.
@@george-louis6998 - No flash or one flash indicates there in no code stored by the DCM. Which is a good thing. I'm assuming you are putting Red to positive and black to a ground and the yellow into the other ports. Rick
@@RickDean thank you for your reply, I'm putting positive on battery positive, negative on number 1 of the 16 pin connector. And the test wire on number 6 or 3 to test. I got a very faint light after the 2 seconds. Or no light.
