RIDEN RD6006 Power Supply Kit with WiFi control | Android App 

Sign up at ELECTRONOOBS.io: electronoobs.io/ Follow me on FACEBOOK for more: facebook.com/Electronoobs help me on Patreon: www.patreon.com/ELECTRONOOBS

15:25 Ahh classic magic smoke

The Ground/Earth should be bonded directly to the Case with a Shake proof star washer and to the supply ground . Do not rely on the screws on the supply brick to ground the case as they are going through a painted surface .

Out of all of the videos I've seen on this supply you've done well explaining how everything should work, especially the app!

Nice Job! Keep up the good job bro! Keep safe, we're praying for you and whole Spain 🇪🇸. From Philippines

It's a nice product. phone and computer application is also very useful.

I saw EEV blog do a video on this, and he was pleasently surprised.

You and Greatscott! talk almost the same way to my hear. I mistake you guys sometimes. I love you guys so much. you guys are doing a great job. I've learnt so much from you guys

The best. Short and full of informations I needed. Thanks.

Great video!! If you set you S-400 to a voltage above 61v, you power supply will be capable of the max 60v👍👍👍

This power supply has some really crazy features !!

thank you for your review, if you have any questions, just contact us

At 2:58 are you sure that you labelled correct dimensions 😛 I mean it should be 40mm in height and 50mm in width !!😜 Even the best of us can make mistakes 😂. I love your videos and watch everything very carefully.🥰👍👍

I bought one too. But I am not happy to see it’s only disconnect one wire with the main switch. I will replace this switch with a 4 wire switch. Here in Germany you can have live and neutral switched.

17:00 The drop in efficiency is at 4 amps, not at 5 amps. They are selling a set here with a 70V power supply, I guess the efficiency would be 1-2% lower than the 48V curve.

The relay is connected between the positive output post and the battery post.

THAT IS TRICK. Thank you. Spain is in my prayers.

This is my favorite channel keepup bro and hope Spain will come from this worse satuation soon we pray and take care your self

Nice video, you remind me a lot of the German youtuber great Scott

hello, I see that in your video description, it is Banggood link, they are not going to sell the RD series power supplies any more after clear their warehouse stock,if you like, you can use our RD aliexpress official store

Great video!! I am already decided to buy the power supply...

Wow :O Probably I'll be getting one of those in near future. By the way great video bro!

Nooo está buenísima, quiero una! Excelente review!

Great and thorough tutorial!

Take your like good man, your video helped me meet and set up my Rd6006

Tip: get a SMPS @ 55-60v so you get less power loss and hence heating which will shorten its lifespan.

After entering the MENU, to go BACK or ESCAPE, press the Potentiometer Knob! I thought it would be good to mention here since it wasn't mentioned in the video, and I had to read the manual to find out how to get out :-P

I feel like a BLE module might also work, and it would be interesting to see this connected via serial too

Amazing video as always

Love your explanation sir

Could you explain the output load of 15 ohms? The load that I see is 2 groups of 5 ohm resistors in parallel. (15 ohms /3) *2=10 ohms

Very good video

What Happen on 15:28... burn Up something 😂😂😂

The psu seemed like it's weak point, also it racked up the price quite a bit, so I used a good quality scavenged atx psu instead, with a $7 65v 400w boost converter, drilled a few extra holes in the casing, and I gotta say it works great, there's no significant ripple even when running at full power, and it's pretty much on point.. It's nothing like the real deal or nowhere near any linear supply, but for the price it's truly great

Did anybody see the cable burn at 15:26 ?

Thank you!

Can you please link the tutorial for the mini power supply you showed at the 12 seconds? I am very interested in putting one together. Great video review 👍🏽

What was the smoke @ 15:25 ?? 🤔 Edit: I should read comments before commenting myself! Sorry!

this whould have been awesome to use for a server power supply to power RC hobby battery chargers except for its very low amp rating. too bad. I need something capable of 70A or more to keep up with my Icharger 308duo and HP HSTNS-P11 power supply.

Nice video awesome power supply

So, it doesn't have dual polarity supply? Right?

I have the rd6006p since today and I hear a faint high pitch sound when I turn on the voltage output. The sound becomes less when I increase the output voltage and from 35 volts the sound is gone. Do others have this too? Or is this a defect?

Can we add csv file for voltage and get custom voltage graph at the output

Hello. What's your opinion about the Miniware power supply vvls RIDEN. Thank you

is there countries with 220v? it's long time since 220 became 230v but china still uses 220v on labels

Thanx dude great video

Great tutorial! What is the latest firmware version?

Guys did u notice the smoke at 15.26

08:26 Front Panel Upside down ;)

I have one. It's perfect.

Why do you have a banana always lying around on your workbench. By the way, I am really impressed by the quality of your videos and the depth you go into. You are 200times better then greatscot. Really bro, you are the inspiration for me to do engineering in electronics.

Android app not available. Could not find on play store. iOS version works, but can not control device with iPad.

translate this video for Electronoobs Spain please, congratulations

It looks interesting!

15:27...I saw magic smoke

Is it possible to access the power supply from an internet browser if connected to wifi?

I have two notes. You can download the app for IOS as well (I have it). I like RD6006w. The only disadvantage is to be switching power supply not a linear one. For less than 200$ you can have high-quality linear lab supply (not soo powerful, but usually you will be fine with 20v 2-5A). I do not get why they put thermocouple inside when it is for outside use?!

Three 15 ohm resistors in parallel is 5 ohms. Two of them in series is 10 ohms. You were calling it 15 ohms.

What is the purpose of the power controller and supply

How copy program in stm32f1 in this product

i am taking server error when ı try to set wifi. Can you help me please

Hi sir, Please can you suggest me about RIDEN RD6012. Is it suitable for mobile servicing shop ? can i use it for sort killer for mobile motherboard ? please write me details . I will be helpful . with best regards , khan.

Does this have reverse polarity protection?

I´ve ordered this psu from a seller on E-Bay 2 times, but I´ve never received it to this day... I got my money back, allright, but I just wanted that goddam´n powersupply... One of these days... ;)

The thing that I dislike is that I want to buy a PSU like this, but for it to run you need another PSU that supplies 60V to it first. Why can't I connect it directly to a normal 230V wall plug? Its kinda an awkard product, if you want to start out and don't have a PSU already.

¿Por qué no has hecho la review en español? ya existen muchas en inglés sobre este equipo.

they really are a nice PSU for the Price!! I really thought i would have seen you do a review on this earlier.. its been out a good while now!! i dont remember anyone pointing out that it needs connects a router 1st before your phone(kinda obvious but something ya would over look) but its been a long time since iv seen a review on this one!! it really is worth the money but maybe a bit to complicated for my needs.. Now Why do you have a banana in your shot always??

excellent

What is the secret behind that banana

Pff working on my own 24V 20A supply as we speak ;)

what version of windows are you using to connect to the computer.

15:24 I have seen smoke? lol

Where can I find the pc software ???

What you can this product with arduino

15:25 I saw smoke

Why is it that you need to connect the USB to use it with the PC? Why can you not just use WIFI? I heard, in another review, that the WIFI feature does not work for the PC and that makes ZERO sense to me. Does anyone know a logical reason for this?

Can we use ESP-01 for connect this power supply to wifi?

Pity that it doesn't have a virtual ground for negative voltage

Please make use of Arduino, add CC & CV features

The case has the wrong link it sends me to the Power sUpply unit.

Got mine for 40USD on banggood. when they sell it low like that, does that mean we can expect a new model soon? I want one with 80-100V so I can use it for ebike and scooter charging. I did see in the changelog from the android app that support for "RD6012" was added. A 120V model maybe?

If anyone interested, you can find my custom firmware for RD6006. If you have any ideas, wishes, what to change or add in to the firmware, or found bugs, just let me know. www.eevblog.com/forum/testgear/ruideng-riden-rd6006-dc-power-supply/225/ monitor.net.ru/forum/threads/651114/page-6

2nd banggood link is copy of first link, needs to be updated to point at case kit instead of front panel controller.

I don’t understand this video. Why didn’t they connect together the actual PSU and controller together? Why sell it in pieces?

Hm, no earth for the metal housing?

Aren't the parts a bit expensive? it's almost a $80 PSU.

hmmm...Keysight is giving out oscilloscopes...

Has anyone gotten this to work with the IOS App?

If you are spending almost 100$ then why don't you buy a supply from a reputable brand? You will have better resell value and wont kill your projects or burn your house down.

Goofed up at 8.26 ......... inserted the panel the wrong way...... "upside down"

Hello friend. I am worried by Spain CoVID 19 status. Please be careful and stay indoor and don't open any parcel without heat treating. Exposing to heat gun can kill all viruses.

This power supplier make diy use Arduino

Best firmware for 6000 series is on EEVblog. Google *UniSoft RuiDeng Riden RD6006 DC power supply* for forum. Below is the Change log. You can always return to stock firmware at anytime. In case of any problems while update, keep pressed [ENTER] while power on device, to run device in BOOT mode. RD60062_V1.32.x.bin - my custom firmware. (where x - is the build number (sub-version)) RD60062_V1.32.bin - original (stock) firmware. If you want to return to stock firmware, recommend to set default setting To do this: keep pressed button [0] while power on device. --------- History: --------- --- RD60062_V1.28.1.bin --- * Initial version * Optimized, get rid of HAL Libraries... switched to LL --- RD60062_V1.28.2.bin --- + The menu was complete remade, now I can easy add new items. + [SHIFT] + [Left/Right] - switches the current layout (without save in settings) (if need to set layout after power on, then can do it over settings menu, as before). + For 'layout 1', can be enabled/disabled items. + Added OPP (Over Power Protection). + [SHIFT] + [MEM] - used to setup OPP + OVP, OCP, OPP - now can be disabled by setting it to 0 + When entering OVP, OCP, OPP, SHIFT button will be highlighted as well (to visually distinguish input: V-SET from OVP, I-SET from OCP). + The RIGHT button now works as a Backspace when typing. + When turned on the internal fan (the one that is on the module itself), icon will be displayed. --- RD60062_V1.28.3.bin --- + Added setting for current cutoff in battery charger mode. + Added setting for batt temp. cutoff in battery charger mode. + Added Battery Charger Layout + Added Setting to skip keypad lock when connect with software. + [MEM] + [.] - now used to reset Wh, Ah --- RD60062_V1.32.1.bin --- * Updated to version V1.32 * Bug fixes --- RD60062_V1.32.2.bin --- * Bug fixes + Option "Digits Style", can select style for large digits (32x64, 12x24, 7-Seg) + Decreased minimum battery voltage from 900mV to 300mV --- RD60062_V1.32.3.bin --- + Support WIFI * Bug fixes --- RD60062_V1.32.4.bin --- * Fix TTL Interface --- RD60062_V1.32.5.bin --- + Option "SkipExitIVSet" (prevents exit from edit mode for V-SET and I-SET when press ON/OFF button). * Bug fixes --- RD60062_V1.32.6.bin --- + Option "Standby LED" (Setup the behavior of the power button LED in power off mode (Default-pulsating, 0%-off, etc...). (in modes 0% and 100% power consumption will be less (cause no need software generate PWM and can switch MCU in to the sleep mode) * Bug fixes --- RD60062_V1.32.7.bin --- + In power Off mode now using hardware PWM (except pulsating mode) for Power LED and turning off unnecessary peripherals, to decrease power consumption. + Remade function to enter values. * Bug fixes --- RD60062_V1.32.8.bin --- + Option "Save Mult." to save current multiplier (for current session only, reset after restart) * Increased minimum battery voltage from 300mV to 500mV (Due to some instability) * Bug fixes --- RD60062_V1.32.9.bin --- + Added option "Power State" (Power On, Power Off, LastState). Sets the state after power on (without a battery, LastState will not remember the last state). + Added option "Power Switch" to turn On/Off the primary PSU. (5V standby power supply required). (Note: Adds a 3 second power-on delay). The control output is routed to the PA14 port (pin 4 of the J2 connector). High level - turn on, floating or low level - turn off. Note: the maximum load on the port is 20mA !!! (it is better to use an optocoupler). + Added option "AutoPowerOff" to automatically turn off after a specified time if the output is disabled. + Added option Home:"Status Info" allows you to choose which parameter to display in the status bar (if you need something else, let me know). + Added option Home:"Mem Hint" If enabled, then pressing any number key will display a hint with the current settings in the corresponding memory cell for 1 sec, a second click during this time will apply these settings. + added new parameter "7-Seg v2" to option "Digits Style", where "input", "vset", etc. will also be 7-segment. + Added display of the system temperature to the caption. + Minor improvements --- RD60062_V1.32.10.bin --- + Added option "Screensaver" to decrease brightness (ScrsaverBright) after specified time. (Note: "ScrsaverBright" must be less or equal to "Backlight") Press any key (except ON/OFF) will turn on backlight and restart timer. + Added option "ScrsaverBright" Screensaver Brightness (0-complete turn off backlight, 1-equal to "Backlight"=0, 2-equal to "Backlight"=1, etc) + Added option "ScrsaverActive" Allow activate screensaver if output is in active state. + Removed meaningless icons from the caption. + [Left/Right] - switches the current layout (without save) (no need press SHIFT anymore) - Removed Layout 2 (Layout 3 already shows all values). + Minor improvements --- RD60062_V1.32.11.bin --- + When edit "ScrsaverBright" or "Standby LED" now you can see the real effect... + Added option "Comm Buzzer" make a sound when the software writes new parameter(s). + Option "Mem Hint" now can select the time how long show the message (2, 3, 5 sec) + Added option "ShiftMemTable" Press SHIFT to display the table with settings for all memory slots. + Added new menu group "- Colors -", now you can choose what color (one of 15) to use for the next parameters: Voltage, Current, Power, Input, V-Set, I-Set, OVP, OCP, OPP, Ah, Wh, Temp, BattVoltage, BattInfo (Layout 2). Option "Custom Color" allow to use selected colors (using this option you can enable/disable custom colors in bulk). Option "Test" is just temporary option and will be removed in next release, can be used to see any color and its hex value. List of colors need be adjusted, if you have any ideas just let me know (tell me hex values). Here is the current list of colors: const uint16_t g_colors[16] = { 0, // 0 - Default C_RED, // 1 = 0xF800 C_GREEN, // 2 = 0x07E0 C_BLUE, // 3 = 0x001F C_WHITE, // 4 = 0xFFFF C_YELLOW, // 5 = 0xFFE0 C_MAGENTA, // 6 = 0xF81F C_CYAN, // 7 = 0x07FF // C_LIGHT_BLUE, // 8 = 0x01CF C_GRAY, // 9 = 0x8410 C_BROWN, // 10 = 0xA145 C_ORANGE, // 11 = 0xFD20 C_OLIVE, // 12 = 0x8400 C_TEAL, // 13 = 0x0410 C_PINK, // 14 = 0xFDF9 C_MAROON // 15 = 0x8000 }; --- RD60062_V1.32.12.bin --- * Bug fixes + Some Improvements + New option "Max Power" to limit the power of primary PSU. (came from RD6018). + Fixed Layout 4 + Added more options for Layout 1 (Note: only first 6 will be displayed). + Added function to dump the screen (make screenshots) (real dump from LCD GRAM), but this function a little bit slow, takes around 13-15 sec (need transfer 320*240*2 bytes over UART). + modified French translation (still need to make translations for German, and Chinese.) + Added Russian Language + Font for menu was changed to Terminus + ENTER can be used to exit from menu.

It sounds like you record your audio in a bathroom

Very few people are watching...

I want it 🙄

WiFi card is useless without an actual app or program that’s actually working without the virus warning. The app they have online doesn’t work well at all. The program for PCs has been taken down on all mirror sites.

35 euros for the case!!! Don't you think its a bit too much?

😊👍👍👍

programable but not so programmable...