Riding Mower Oil Leak Fix - Briggs Oil Seals Replacement

Подписаться 24 тыс.

Просмотров 2,8 тыс.

50% 1

Riding mower leak repair. Replacement for Briggs crankshaft oil seal and oil pan seal. Everything used in the video is available below. Have fun and get dirty!
Engine Gasket Set: a.co/d/5PlQ6rP
Reinzosil Gasket Seal: amzn.to/3UfPRR8
Briggs Manual: a.co/d/fByNrS4
Oil Filters: a.co/d/0y9tnax
Torque Wrench: amzn.to/3Uookhx
Locktight: amzn.to/4bc4NGr
Sweet Impact Wrench: amzn.to/3WeVu4i
Engine Assembly Lube: amzn.to/3Uunhgc
Manual Gasket Scraper: amzn.to/3JyNZ0x
Drill Gasket Scrapper Pads: amzn.to/49LzTDG
Wooden Rings: amzn.to/3Q9xPhS
Pic tool: amzn.to/44cnOX2
Oil Drain Upgrade: amzn.to/4aUeE3M
Related Videos:
Full Engine Rebuild Video: • Briggs & Stratton Rebu...
Leak down Head gasket Test: • Riding Mower Smoking! ...
Cylinder Honing Video: • Cylinder Honing w Flex...
Cylinder Head Cleaning: • Cylinder Head Cleaning...
Piston Cleaning: • Piston Cleaning in Engine
Kawasaki Piston Ring Installation FR691V Engine: • Kawasaki Piston Ring I...
Kawasaki Oil Seal Video: • Kawasaki Crankshaft Oi...
PTO Removal Video: • Cub Cadet Kohler PTO C...
Mower Mike’s Super Cool Tool Store: www.amazon.com/shop/mowermike
Mower Mike

Хобби

Опубликовано:

25 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 16

@user-rx7px3uk2l 2 месяца назад

Nice job Mike.

@MowerMike 2 месяца назад

Hey I appreciate that.

@rooba63 Месяц назад

Good job. I fixed the compression release on my mower but thought I'd get away with keeping the old seal. First time out, oil spraying everywhere. Will have to take it all apart again. Should have listened to my old Dad's advice - if a job's worth doing.......

@MowerMike Месяц назад

Haha that sucks! Ya live and you learn

@rooba63 Месяц назад

Your video is great, but I'm struggling with my oil seal. What do you do with the pick? Are you pushing the seal down on the shaft or pressing the seal into its groove in the sump? Can't figure it out. Thanks.

@MowerMike Месяц назад

@@rooba63 I pressed the seal down without the shaft in it and the pan taken off. Not sure if you can put it in there without removing the oil pan.

@rooba63 Месяц назад

@@MowerMike Thanks for that.

@RiseOrRelinquish 2 месяца назад

Cool video. I just did the head gasket replacement on my 19HP Briggs. I was curious how the oil pan gasket is replaced. It doesn't appear to be leaking (yet). I hope I don't have to do this.

@MowerMike 2 месяца назад

Yep it is a pain. Well done on the head gasket. I will have a few more coming out on this motor soon.

@kenh733 2 дня назад

I have a 13.5 hp looks like this one and its leaking bad at the governor shaft seal, its small like 3/8 inch, I cant find one anywhere, anyone know where I can find one? all I can find is the ones that are like half inch

@MowerMike 2 дня назад

I know the seal kit I ordered had a new seal in it for that. The link is in the videos description

@terryhocking1904 23 дня назад

Mike, followed your instructions verbatim and it is leaking. Any thoughts?

@MowerMike 15 дней назад

Not sure. I would track down exactly where it is leaking from and go at it. Maybe it is leaking from the pan?

@deltaxcd 17 дней назад

was it necessary to remove that oil pan for that? look lir it was possible to replace it even without removing engine

@MowerMike 15 дней назад

For me yes, but I have only done it a couple of times. Maybe you can pull it off

@deltaxcd 12 дней назад

@@MowerMike Just did my own replacement no need to remove anything you juts use wood screw to pull it out and then hammer in new one ( which is sort of problematic as you need to find tube of right diameter. we damaged one seal)