Rinse Bar Comparison Gardiner Vs X Line 

Nigel O totally agree. I couldn’t go back to not using a swivel but you can normally unscrew the Connector of the back of a brush with a swivel and fit it to whichever brush you want 👍

Dave Spotless Cleaning yes Dave you are right but Gardiner are just about to bring out a low pressure 35cm rinse bar which could cover all bases 👍

@@squeakycleandave1 this will be great, I'm definately getting one

Dave Spotless Cleaning Gardiner have got some new rinse bars since I made this video. They are just about to release a 35cm low pressure one which I will review once I can get it. Thanks for watching 👍

Dave Spotless Cleaning Gardiner have got some new rinse bars since I made this video. They are just about to release a 35cm low pressure one which I will review once I can get it. Thanks for watching 👍

@@squeakycleandave1 got the 26 cm one, few of the jets are blocked but doesn't affect the rinse

Thanks for watching Chad 👍

Yes. You just have to unscrew the socket of the xline brush and replace it with a Gardiner one

Thanks Andrew. If I get chance I will 👍

I haven’t had that problem personally and without actually seeing it it’s hard to troubleshoot. I have my controller set to 80 so maybe try turning it up a bit.

JD thanks for watching JD. Glad it helped👍

Harry T it will be in the van so feel free to come and have a look

I use hot water during the winter so I always used a Gardiner stiff. The hot water destroys the soft bristles

@@squeakycleandave1 yes dave. I do believe you need a stiff brush for hot water. Do you have gas with a shower unit. Or is it a diesel hot water one. 👍

@@lbaz0710 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ogw6FBV3suw.html

Daniel Thorley definitely needs turning up. I’ve got an old analog Vari Stream controller which is set to about 3/4. I still use less water though because I found I rinse quicker

@@squeakycleandave1 are you using 8mm minibore? I'm using 6mm microbore. If you have the larger hose, maybe it's due to the lower volume of water getting through the thinner hose

Daniel Thorley I’m using 6mm as well. Try checking what your flow is like before you connect onto the pole and if it’s high it may be a slight blockage somewhere. I had it once. Couldn’t understand why I had to keep turning the flow up. If it’s not the hose check that the fan jets and the hose to them isn’t blocked

@@squeakycleandave1 thanks Dave, I'll check. And thanks for your videos - always happy when I see a new video from you!

Davey Snoad yes mate. I do mostly domestic houses and always use the 35cm brush without any problems 👍

FlashTechEngineering the average temperature of my water coming out of my tank that I fill the van from is between 4 and 7 degrees C in the winter at the moment it’s 16*c during the hot weather it went up to 25*c so it’s already quite warm. Where I have to park it’s a hassle to plug it in so only heat it when I need to

The brushes themselves are ok BUT I don’t like how you can only use them with Ionics poles and I think that the rinse bar isn’t wide enough

@@squeakycleandave1 thanks for your opinion

Steve Hughes it the video the flow rate is set the same for both but having more jets the Gardiner lets more water through so uses more water

Steve Hughes the brush I’m using now is the 35cm DuPont from Gardiner gardinerpolesystems.co.uk/all-products/whats-new/35cm-ultimatetm-brush-duponttm-hybrid-bristles.html

Enjoyed the video, a couple of points though, why were you comparing the Xline sill brush and not the rectangular brush? A Gardener swivel can be fitted to an Xline brush in a couple of mins and lastly Xline do an excellent DuPont bristle rinsebar brush 👍🏻

julian pierce good points. I used the sill brush as it was what I could get my hands on as I couldn’t afford to buy another brush for the video and it was a comparison of the rinse bar rather then the brush. The weight and price were taken from the x line web site for a 26cm rectangular brush the same as the Gardiner. The DuPont brush I already had from Gardiner as I was going to do a review on it ages ago and never got round to it. If I was to buy a xline I would fit a Gardiner swivel but as I had borrowed the brush I didn’t want change it. Thanks for watching 👍

Squeaky Clean Dave thanks for the reply, I use the Xline flocked rinsebar brush and I’ve fitted a rinsebar to my Phantom brush too

Slamalamadingdong Yarp! It’s what they say for a rectangular 26cm brush the same shape and size as the Gardiner on there website. Not for the sill brush

same as any other window, The Dupont brushes are better infact than the orange ones in all applications

The controller lets you set the flow rate of the water so it’s not on full the whole time. Someone contacted me last week to say they weren’t using a controller and they used 350litres of water on 6 houses. 350 litres lasts me the whole day