Road King Fork Lowering Kit 

I'm wondering how comfortable those saddleman seats are with the lil back support. They look real good.

Thanks for watching

Thank you. After I accounted for the cap, the PVC total size was 3/4 of an inch.

I haven't bottomed out at all. It is slightly stiffer but not at a level that is of any concern or uncomfortable. I'm sure you can make some tweaks depending on preference by experimenting with different shock oils. Hope this helps

No sir, its been a pretty smooth ride.

I use a combo of sandpaper, brillo pads and then polish to buff them. Got a video on the process on my road Glide. Hope it helps.

Hey, what's up Petey, it's not a particular brand, more of a mix. Check it out. www.ebay.com/itm/232623676246?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=LGtLnFBQRrK&sssrc=4429486&ssuid=e3wdI4CkTFy&var=&widget_ver=artemis&media=COPY

@@dommatm4425 it's on an air ride set up, when fully dumped, probably a good 5 to 6 inch drop from stock but you can't ride at that setting, it will be a very uncomfortable ride. As far as how low can you be and still be comfortable is dependent on rider weight. I'm 5'7" and usually inflate the air ride to the point that I'm just flat footed, never measured at that point but when I park it at shows I drop it all the way. Hope that helps. Thanks for watching.

None at all sir. I was wondering if I would but been all good and the ride isn't stiff.

I put the progressives in with a 2 inch lowering. Nervous to put my fender back on. But it’s so much more comfortable with it back at a more level stance after adding the 21” wheel.

Let me know how it goes