Nothing beats the s5 or s50. That vacuum is such a joy to repair because everything is made to be easily replaced and repaired. But with newer models repairs are way harder
Thanks, you saved my robot. It had a water damage after an unfortunate event and with this video I was able to clean the motherboard which got the battery running again.
@@sicherheitssventil Ich sag mal so, kurze Zeit nach dem Unfall hat er sich komplett ausgeschaltet und dann habe ich nicht versucht zu laden, um größere Schäden zu vermeiden. Nachdem ich den Roboter gemäß anleitung geöffnet, mit Isopropanol gereinigt und getrocknet hatte, habe ich ihn wieder eingeschaltet. Leider funktionierte der rechte Antrieb immer wieder nicht, sodass er nicht losfahren konnte. Ich habe ihn dann noch einmal auseinander genommen und dieses Mal bis zu den Antrieben. Den betroffenen Antrieb auch auseinander genommen. Seitdem funktioniert er wieder einwandfrei. Vermutlich haben Haare, Dreck und Feuchtigkeit einen Kurzschluss verursacht. Vor dem Reinigen und Trocknen solltest du den Roboter nicht mehr einschalten.
La vidéo PARFAITE de montage et démontage. Clair, net, précis. Et le repérage avec nomenclature ça c'est vraiment top. On ne peut pas avoir peur de se lancer dans un démontage ! Je démonterai mon ROBOROCK sereinement et moins "à l'instinct" qu'avec mon ancien iLIFE V7S pro !! XD
Im using this video to take apart and clean my S4 Max. It’s close enough that this video really helped. It seems most, if not all, of the steps up to wheel removal in the video are necessary.
Thank you so much for this video. this bot was slightly different than mine. only one area was different but because of your video i was able to take apart my s5 to solve an error 10 problem that kept saying to change the filter when it was brand new.
@@xjwalker Yes I solved it, the piece that was removed at 1:59 was blocked . once i cleaned that and put everything back. everything was fine. Best for luck to you. its a bit of a pain to remove everything but it's worth it.
Congratulations!! Best video!! Tive um problema com meu sensor de penhasco (Cliff sensor). Fiz a compra de novos sensores pelo aliexpress e fiz a substituição seguindo seu vídeo! Excelente! Graças a você consegui arrumar meu robô.
Thank you very much, I would never have been able to do it without this video. I hope for 1 million subscriptions. Can you teach me that? I wish you a nice day
Many thanks for your video. I needed to open and clean after 1.5 years of use. I had a spider nest on the lidar , the robot was really weird these days. 😂😂
i guess Im randomly asking but does anyone know of a method to get back into an Instagram account?? I was dumb lost the password. I appreciate any tips you can offer me.
@Christopher Cristiano thanks so much for your reply. I found the site through google and Im trying it out now. Takes a while so I will reply here later with my results.
Thank you for this, I solved my S5’s “error 10 - Filter is clogged” problem by cleaning out the fan (1:59 in the video). Time consuming but take it slow and don’t lose any screws :)
Is there anyway you would know how the dustbin/mop sensor works? It see the bin but not the watertank, ive disassembled and verified if the sensor is in the corect position, but still not working.
hi, I want to ask a question about battery performance and life in general. I am using s5max. When will the battery lifetime start to decrease if we use it at least once a day and everyday in a week ?
It's battery chemistry that answers all questions about life cycle - since it's li-ion battery, generally speaking it gives 500 charge cycles before starting to deteriorate. Emphasis on ''generally speaking'' because life cycle of li-ion battery greatly varies on charging aspects (if battery gets fully discharged, fully charged, rate of current etc).
