yes, with linear pattern it can be done. But, When you take this conveyor assembly as a subassembly in another Project to create the motion study of a giant assembly then in that case the linear pattern won't work. Linear pattern or any pattern is suitable (to perform motion) only in the same assembly. This Project was a part of U shaped conveyor project (available on channel) that's why belt was used.
I want to change colors of a part in solidworks motion. I'm really having trouble in doing that. can you help me in any way. actually i wanna create an animation in which colors of a part change. kindly reply soon!
It is possible to hide and Show a Part in Solidworks Motion/Animation But As far as I know it is almost Impossible to change the color in between the motion study/Animation. But If you want to show that color change at any intermediate time then i think you can follow this approach; >Assign Part 1 (let's say) a colour >Create a copy of same part (in assembly) with different name (Let's Part 2) and assign it the desired colour >Mate the both parts in such a way (like one super imposed over another) that Part 1 and Part 2 moves simultaneously [Keep part 2 Hiden till the time] >The Time at which you want colour change, Hide the Part-1 and Show the Part-2 (using KeyFrame at that point of time) I hope this may help you.
I am suffering from this error Failure to satisfy velocity initial conditions. A probable cause is an over-specification of initial velocities of bodies. Please specify fewer initial velocities and try again
6:27 if you applied contacts properly and still the box is falling then: 1. Before Going to Create Motion Study, Make sure that the Box is not penetrating the rollers anywhere (keep the box slightly above the rollers) 2. Create a New Motion Study 3. If Still Fails then Create a New Assembly and give a try. Check these similar tutorials: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yPrzRc3g_xc.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8UQmtxg3ry4.html Hope this will help you.