Rolling Fenders on the OBS Sierra | New Set of Wheels 

I’m glad you found it helpful. The spacer was needed because the size and length of the tool we needed to get the proper angle, because we had the jack underneath the diff. the distance between the axle and body was closer compared to if we would have lifted it up from the frame given us greater distance. Main thing is you will have to work it in small sections at a time before readjusting again due to the squareness of the fender, you run out of roller before going all the way across. You will never completely bend back the edge without cutting, because of the double sheet metal body that is 3/8 to 1/2 apart from each other. Hope that answers your question.

That is right, it was a 1.5” spacer. 👍

With small bumps it doesn’t only with the big one. Under normal condition driving it’s good.

Thanks for the support man. My brother had no idea what they came off of when he bought them the guy didn’t know either. I did a little bit of research and found out they’re actually off of a 08-16 Chrysler town and country 2nd row seats. Couldn’t believe it but they look nice.

@@five7garage826 That 08-16 town and country, is that a van or what? Not sure what it is🤦‍♂️

@@nonameisthename138 I think that's like a caravan

@@marccato952 I've heard of it...but not sure what it is. I'll have to check that out. But thanks for your comment👍

It doesn’t rub at normal driving conditions but it will on the passenger side, when it bottoms out. But we noticed the bed of the truck was pulled to the driver side more than the passenger side, as soon as we straighten the bed back it should have no problems.

Fronts are 9” wide with +1mm offset and rears are 11” wide with +18mm offset.

Do you they gove you.any problems? Like rubbing or anything?

No problems at normal driving speed only when it bottoms out the passenger side rubs a little bit. Because the bed is off center to the driver side about half an inch. Once we adjust that it should be fine.

Is it pretty easy to roll the fenders? Did you mess up the paint at all?

My brother purchased it on Amazon.

Front 22x9 tires 255/30R22 Rear 22x11 tires 295/30R22

What is the off set for rear wheels?

I don’t know the exact code bro but it’s called Destroyer Gray from Chrysler Jeep Dodge Ram line.

@@five7garage826 ok thanks