Тёмный

Roof Rack Customization - Wind Deflector & End Caps 

Jackman Works
Подписаться 393 тыс.
Просмотров 56 тыс.
50% 1

Pallet Hauler 2.0 is finally getting some much needed character & Jackman flare!
Share & Subscribe? bit.ly/JackmanWorks
Details! ▼
------------
\\\\\ SUPPORT MY SPONSORS \\\\\
𝐓𝐨𝐭𝐚𝐥𝐁𝐨𝐚𝐭 (15% OFF everything TB with code "Jackman15"!)
► High Performance Epoxy - bit.ly/35Rg39M
► Carbon fiber - bit.ly/2PmI7LJ
► Thixo epoxy adhesive - bit.ly/2DIDlCA
► Mica iridescent powder - bit.ly/33EDUbe
► TotalTint pigments - bit.ly/2DJjDXk
► Penetrating Epoxy - bit.ly/3850a18
► Halcyon Clear Varnish - bit.ly/35VPG2v
𝐈𝐧𝐯𝐞𝐧𝐭𝐚𝐛𝐥𝐞𝐬
► X-Carve CNC - bit.ly/2qfJjYw
► 1/4" end mill - bit.ly/37YIy7b
► 1/8" end mill - bit.ly/34S0A9u
► 1/16" end mill - bit.ly/362q9ou
► Corian - bit.ly/2reiapt
► Easel CNC Software - bit.ly/2DDTRUz
𝐈𝐒𝐎𝐭𝐮𝐧𝐞𝐬 (15% OFF today only 12/4/19 with code "BF15" )
► My exclusive solution for hearing protection in the shop - bit.ly/2RiTVkn
------------
\\\\\ PROJECT SPECIFIC STUFF \\\\\
► Full build article - bit.ly/2OMVfuh
Notable Materials & Tools used on this build:
Materials
(wind deflector)
- Pallet wood diamond sheets • Pallet Wood Coasters w...
- Wood glue amzn.to/2vKGTQU
- High performance epoxy resin bit.ly/35Rg39M
- Carbon fiber sheets bit.ly/2PmI7LJ
- Super glue amzn.to/2YbZz9D
- Blue tape amzn.to/2jO5Gva
- Iridescent powder bit.ly/33EDUbe
- Pigments bit.ly/2DJjDXk
- Penetrating epoxy bit.ly/3850a18
- Halcyon clear varnish bit.ly/35VPG2v
(end caps)
- Corian bit.ly/2reiapt
- Thixo adhesive bit.ly/2DIDlCA
- Rubber grommet amzn.to/2Llb3T3
- Bolt, nut, washer for roof rack amzn.to/2LkfnBY
- Bolt for ladder rack amzn.to/2Pdef4f
Tools
- Bluetooth hearing protection bit.ly/2RiTVkn
- Respirator (use code "Jackman" for 5% off!) - bit.ly/2zOvwwn
- Table saw amzn.to/2j4bvVU
- Silicone project mat amzn.to/2tvLbIk
- Bar clamps amzn.to/2PcPViG
- Bandsaw amzn.to/2j4auNu
- Disk sander • Giant 16" Disc Sander ...
- Belt/spindle sander amzn.to/2jmRXik
- Drum sander amzn.to/35oxOwG
- X-Carve CNC bit.ly/2qfJjYw
- Propane torch amzn.to/2PaHAMz
- Flush trim router bit amzn.to/2vDQsQu
- 1/8" rounder over router bit amzn.to/2qXGt5o
- Palm sander amzn.to/2qgP5ZX
- HVLP sprayer www.rockler.com/rockler-hvlp-...
------------
\\\\\ GENERAL PANDERING LINKS \\\\\
■ Website - www.jackmanworks.com
■ RU-vid - / jackmanworks
■ Instagram - / jackman_works
■ Twitter - / jackmanworks
■ GIFs - giphy.com/channel/jackmanworks
■ Facebook - / jackmanworks
Plans, stickers, t-shirts, etc: www.jackmanworks.com/shop
Shoutout to my top Patreon supporters!
- Dave Soetanto
- Inch Calculator
- Felix Atter
- Erik Finnestead
- Leif Hietala
- Steven Ingles
- Old-School DIY (@gfc62)
- Jeffery Nichols
- Chad from ManCrafting
------------
\\\\\ MUSIC \\\\\
Music from Epidemic Sound. Try it yourself, free 30 day trial!
share.epidemicsound.com/jackman

Хобби

Опубликовано:

 

3 дек 2019

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 176   
@JackmanWorks
@JackmanWorks 4 года назад
Support my sponsors who made this video possible: 𝐓𝐨𝐭𝐚𝐥𝐁𝐨𝐚𝐭 (20% OFF everything TB with code "JACKMAN"!) ► High Performance Epoxy - bit.ly/35Rg39M ► Carbon fiber - bit.ly/2PmI7LJ ► Thixo epoxy adhesive - bit.ly/2DIDlCA ► Mica iridescent powder - bit.ly/33EDUbe ► TotalTint pigments - bit.ly/2DJjDXk ► Penetrating Epoxy - bit.ly/3850a18 ► Halcyon Clear Varnish - bit.ly/35VPG2v 𝐈𝐧𝐯𝐞𝐧𝐭𝐚𝐛𝐥𝐞𝐬 ► X-Carve CNC - bit.ly/2qfJjYw ► 1/4" end mill - bit.ly/37YIy7b ► 1/8" end mill - bit.ly/34S0A9u ► 1/16" end mill - bit.ly/362q9ou ► Corian - bit.ly/2reiapt ► Easel CNC Software - bit.ly/2DDTRUz 𝐈𝐒𝐎𝐭𝐮𝐧𝐞𝐬 ► My exclusive solution for hearing protection in the shop - bit.ly/2RiTVkn
@uknowulikethat4042
@uknowulikethat4042 4 года назад
"Don't forget to mix" lol. a new Jackman classic
@TotalBoat
@TotalBoat 4 года назад
we need this clip on every product page for our epoxies!
@JackmanWorks
@JackmanWorks 4 года назад
You guys need to put my phone number on the jugs so people can call me whenever they mix some epoxy and I can scream at them for not mixing enough.
@michaeljoachims6532
@michaeljoachims6532 4 года назад
Love your videos! Always entertaining and informing. Recently bought a pair of Carolina boots because of your constant support for their product. Very comfortable boot!
@MrGrant440
@MrGrant440 4 года назад
The roof rack wiggle was hilarious!!! You are one of the best creators on RU-vid
@JamesRichman138
@JamesRichman138 4 года назад
You are a strange dude. Please never change.
@thatkidjofo4841
@thatkidjofo4841 4 года назад
Absolutely love your videos! The plugs were a very clever fix and look so clean.
@zallibik9931
@zallibik9931 4 года назад
Awesome mate, thanks for continued refreshing ideas and excellent skills.
@markn2904
@markn2904 4 года назад
Always a pleasure to watch s Jackman Works video. Interesting projects and innovative filming.
@elainehoward8822
@elainehoward8822 4 года назад
Another brilliant build and execute. Just love to watch you work xxx
@CammiesGarage
@CammiesGarage 4 года назад
Looks great, Paul. Nicely done. Excellent editing, as usual.
@davebauerart
@davebauerart 4 года назад
Looks awesome! I love the great trick of cutting a bigger trapezoid on the carbon fiber and making it fit in the wood cutout! Just had to match the angles.
@JackmanWorks
@JackmanWorks 4 года назад
Exactly! Easiest inlay I've ever done
@varneyivideos
@varneyivideos 4 года назад
This was a really great video. I loved all the CNC and traditional working methods combined.
@JackmanWorks
@JackmanWorks 4 года назад
This was a fun one because I could work on something while the CNC was cutting or something was curing
@glg3945
@glg3945 4 года назад
LOVE your videos! Such beauty and fun stuff evolve into awesome products created by you!!! Peace and Good Fortune to you and your family.
@Folktopia
@Folktopia 4 года назад
So bada$$. Love the one of kind creativity.
@jesse7055
@jesse7055 2 года назад
Wow 😱 when I clicked on this video I was not expecting that kind of craftmanship ,and that kind of video editing either , amazing stuff
@FigmentsMade
@FigmentsMade 4 года назад
Looking good! I can't wait to see just how orange this truck is going to get!
@JackmanWorks
@JackmanWorks 4 года назад
So much orange, I can't wait! Shooting for a similar color as the Element :)
@iDeviceChgr
@iDeviceChgr 4 года назад
Great build and video Paul! 👍🏼👍🏼 also when you were shaking your truck when testing out the end caps, you reminded me of the one guy Richardson on the movie Hot Rod 🤣
@rocketglass1
@rocketglass1 4 года назад
Wow cool video. Can wait to see what you make next.
@garagemonkeysan
@garagemonkeysan 4 года назад
You are the master editor! : ) So entertaining! That's a cool air deflector. Go TotalBoat! Mahalo for sharing. : )
@RLLWoodworks
@RLLWoodworks 4 года назад
Great as always. While not part of the project, I love the shot of you driving through the water.
@JackmanWorks
@JackmanWorks 4 года назад
haha I ended up getting an even better shot today from the roof of the car, I'll be sure to post that on my Instagram feed.
@MaciejDanielTomczuk
@MaciejDanielTomczuk 4 года назад
Fantastic video and nice project 👍
@fulanadetal7710
@fulanadetal7710 4 года назад
I know I always comment the same thing but man, this editing! Love it! ❤️❤️❤️
@JackmanWorks
@JackmanWorks 4 года назад
I'm glad you're always enjoying it!
@ManCrafting
@ManCrafting 4 года назад
Cool idea. Nice job!
@timberdish
@timberdish 4 года назад
Lovely work buddy, looks very cool on the new truck!
@JackmanWorks
@JackmanWorks 4 года назад
Thanks! It still isn't Jackman enough though ;)
@millertravisd
@millertravisd 4 года назад
First off awesome idea. Secondly I think this is your best editing job on a video yet! Great vid man. Bravo!
@JackmanWorks
@JackmanWorks 4 года назад
Amazing to hear! I try to up the quality a little bit every time
@GTL77
@GTL77 4 года назад
Another fine video! I got a kick out of the mixing montage 🤣 funny as usual keep up the awesome work dude👊🏽
@JackmanWorks
@JackmanWorks 4 года назад
I promise you'll think of that next time your mixing epoxy :)
@whazee
@whazee 4 года назад
Thats some pretty insanely good editing skills there man! Fantastic vid! 😃👍
@JackmanWorks
@JackmanWorks 4 года назад
Thanks!!
@phil.pinsky
@phil.pinsky 4 года назад
Another amazing video and project!
@JackmanWorks
@JackmanWorks 4 года назад
Thanks Phil!
@TheGrantAlexander
@TheGrantAlexander 4 года назад
Looks good Paul! 👍😎
@coffey2640
@coffey2640 4 года назад
Great video, as usual!
@JohnMadeit
@JohnMadeit 4 года назад
Definitely cooler than the stock one.
@AwesomeWoodThings
@AwesomeWoodThings 4 года назад
Dude. This is creative and awesome. A-B-P Always be plugging. Ha! Love it!
@JackmanWorks
@JackmanWorks 4 года назад
#alwaysbeplugging! :)
@azashukri5322
@azashukri5322 4 года назад
I love it!
@TheWoodLab
@TheWoodLab 4 года назад
Mix! And scrape... Well done Paul! - Jim
@JackmanWorks
@JackmanWorks 4 года назад
MIx mix mix mix mix
@alfriedar
@alfriedar 4 года назад
You just have so much creative energy and way too much time... lol You rock complicated ... and man the crazy tools you have!
@JackmanWorks
@JackmanWorks 4 года назад
I might have creative energy, but time is what I'm lacking haha
@suearmstrong3404
@suearmstrong3404 4 года назад
Love it!!
@paulkelly1702
@paulkelly1702 4 года назад
Pimp'n your ride JACKMAN style!
@novello76
@novello76 4 года назад
Mitico, seguirti è un piacere.. grande
@PurpleTT99
@PurpleTT99 4 года назад
Looks top notch, hope it has the strength needed over time, there's a lot of joints to fail. Maybe some fibreglass mat on the rear if it breaks (again!). Love the editing job, really is a pleasure to watch.
@JackmanWorks
@JackmanWorks 4 года назад
Me too! I'm super curious to see how it holds up to the elements
@fildancingio98
@fildancingio98 4 года назад
You're great and know wath you'll make!
@rodriguesbob100
@rodriguesbob100 4 года назад
Dude is that a new Honda Ridgeline? I work for a Honda dealership and your truck looks awesome. Great work dude. Love your work. 😉
@JackmanWorks
@JackmanWorks 4 года назад
Love it! Replaced my Element that I had for 12 years, nothing will replace that but I'm seriously enjoying the new truck. Took a bunch of vans/trucks for test drives and it wasn't even a decision after trying out the RL. I'm planning on wrapping it in orange vinyl next year :)
@denisgourdon3769
@denisgourdon3769 4 года назад
humour et talent...j'adore ! big up
@danthemakerman
@danthemakerman 4 года назад
Custom carbon fiber is pretty neato!!!
@JackmanWorks
@JackmanWorks 4 года назад
Yes! I need more!!
@giovannipetitti1588
@giovannipetitti1588 4 года назад
Great Jack 💯💯👏👏👏👏
@TimberWood.Customs
@TimberWood.Customs 4 года назад
My jaw dropped when you Spun the peace and it broke lol!
@victorbrenkman1728
@victorbrenkman1728 4 года назад
Je suis français et je regarde tes vidéos et elle sont vraiment très très bien !! J'adore 😍
@JackmanWorks
@JackmanWorks 4 года назад
Merci :)
@user-kj5bb2xy1s
@user-kj5bb2xy1s 4 года назад
Как всегда - высший пилотаж !!!
@EthanCarterDesigns
@EthanCarterDesigns 4 года назад
Another super fun project and video Paul! The carbon fiber added such a nice touch! Haha if the trucks a rockin...
@JackmanWorks
@JackmanWorks 4 года назад
I need to play more with carbon fiber! This was the first, but won't be the last.
@EthanCarterDesigns
@EthanCarterDesigns 4 года назад
Looks so cool - glad it won't be the last!
@FredMcIntyre
@FredMcIntyre 4 года назад
The wind deflector looks awesome, and the end caps turned out great! 😃👍🏻👊🏻 ...... nice rack Paul!
@jasontummonds1437
@jasontummonds1437 4 года назад
That piece of the pallet wood snapped off super easy - maybe reinforce the whole back side with carbon fiber. Also, when using resin on composite materials such as carbon fiber or fiberglass, try using less resin. Less resin leaves a stronger end product. More resin leaves your end product weaker due to the higher level of part being brittle. Just a few tips from my aircraft repair days,,,,
@JackmanWorks
@JackmanWorks 4 года назад
It slammed into that clamp pretty hard, I'm not worried about it breaking now that it's on the roof and supported in 4 different places. I ended up squeegeeing out a lot of the resin when I was trying to get it flat, will definitely keep in mind the less resin tip next time! Thanks!
@reforzar
@reforzar 4 года назад
The clamp spin break made me lol. 😂
@JackmanWorks
@JackmanWorks 4 года назад
I can lol watching it back, but definitely didn't in the moment 😂
@DanielH
@DanielH 4 года назад
The problem with that in some countries is that they need to get an inspection before being allowed with that on the street.
@JackmanWorks
@JackmanWorks 4 года назад
Wow, I honestly never even thought about that being a thing.
@shahbazkh2885
@shahbazkh2885 4 года назад
Very nice... Any editing software you use
@kenmaira
@kenmaira 4 года назад
Super awesome looking project Paul, keep up the good work! Also; I still don't see a problem using wet rags to remove glue
@JackmanWorks
@JackmanWorks 4 года назад
You're the worst lol
@kenmaira
@kenmaira 4 года назад
@@JackmanWorks Still not sure what the problem with it is, I just have too much glue there lol
@JackmanWorks
@JackmanWorks 4 года назад
@@kenmaira just start hosing off you projects instead hahaha
@kenmaira
@kenmaira 4 года назад
@@JackmanWorks Lemme grab my pressure washer
@AndrewSzeto
@AndrewSzeto 4 года назад
gorgeous paul!
@JackmanWorks
@JackmanWorks 4 года назад
I know you are but what am I
@suffolkstudio_
@suffolkstudio_ 4 года назад
4:45 Thixo is what they used to call me in High School
@JackmanWorks
@JackmanWorks 4 года назад
I hear they still call you that...
@slaizen
@slaizen 3 года назад
Jackman Works ? Bru that god work ! =0
@JaimeDrewatWoodenU
@JaimeDrewatWoodenU 4 года назад
I had to replace my element only because I needed to get three kids in the back. The element was great in every other aspect. Putting a car seat in wasn’t as easy as in a car with regular doors but car seat are a pain in general to put in.
@JackmanWorks
@JackmanWorks 4 года назад
The Element is the perfect car provided that you don't have any kids haha, I definitely wouldn't want to do that with kids especially with my older one that had the seat belts on the doors
@SamuelBroch
@SamuelBroch 4 года назад
Very Cool!!!
@SwitchAndLever
@SwitchAndLever 4 года назад
Sweet as heck! Are you at all concerned it may break, like in the video, without something holding the wood together in the back?
@JackmanWorks
@JackmanWorks 4 года назад
With it mounted on the car, no not really. It took a pretty big hit to crack it like I did, so if something breaks it now it'll be something that's big enough it'll hurt my car too haha. I'm more worried about how it'll hold up to being in the elements 24/7 everyday
@SwitchAndLever
@SwitchAndLever 4 года назад
@@JackmanWorks Ah yeah, I hear ya. Well if you hit a moose at least it will appreciate the wind deflector as it's pulverizing the top of your car. 😉
@bruceyyyyy
@bruceyyyyy 4 года назад
The Element is gone! I just fixed the rear suspension arms on one. They were setting like stance nation. How do you like the Ridgeline? It's appealing when the wife's Baja has to go.
@JackmanWorks
@JackmanWorks 4 года назад
So sad :( I had that thing for 12 years and it was incredible, just ended up having to do more work on it then I had time to keep up with so I had to move on. The Ridgeline is a worthy replacement though, it's the only truck I would ever consider buying and I'm thrilled with my choice, so much storage and it rides so nice. You'd love it as a replacement for the Baja, very similar but a lot bigger (the thing is 3' longer than the Element which I'm still getting used to haha)
@bruceyyyyy
@bruceyyyyy 4 года назад
@@JackmanWorks The newer/higher end Honda AWD system seems a big improvement too. Lots of cool stuff on the Ridgeline.
@iamepimethus
@iamepimethus 4 года назад
It’s been soooo long since I’ve had my sexy jackman fix! So nice
@JackmanWorks
@JackmanWorks 4 года назад
Sexy Jackman time! Posted a video 2 weeks ago in case you missed it (and another one is coming next week!!)
@iamepimethus
@iamepimethus 4 года назад
Jackman Works two weeks is a long time!
@JackmanWorks
@JackmanWorks 4 года назад
True, true!
@mp.maker.82
@mp.maker.82 4 года назад
Spettacolo!!!
@longhairmullet
@longhairmullet 4 года назад
Ok can I just buy one already! Geez that was one sexy peek into your skills! Ive never watched your channel before but wow what skill, in both the shop and who ever is at the computer editing.. Ya! 🤩 Ok where can one purchase one of these piece of arts.. 😉
@ddm3125
@ddm3125 4 года назад
Long live the Element!
@JackmanWorks
@JackmanWorks 4 года назад
It'll be missed!!
@scottsimpey2965
@scottsimpey2965 4 года назад
Awesome build man. Was your coaster video really a year ago? God damn where does the time go to, it seems like it was just like week or two ago that you posted that video.
@williamsalfonsoreinosoalva1219
@williamsalfonsoreinosoalva1219 4 года назад
Me encantan tu videos, saludos desde CHile.
@bmac7039
@bmac7039 Год назад
Need your help with a project...
@benjaminpike1437
@benjaminpike1437 4 года назад
I was just thinking about doing something similar to this and then I see a new Jackman video pop up on my screen and it's this. Pretty awesome! #palletwoodlife :-D
@JackmanWorks
@JackmanWorks 4 года назад
Too cool!! I'd love to see your take on it to
@matthewperlberg
@matthewperlberg 4 года назад
Dope.
@fultronjackson
@fultronjackson 4 года назад
What rack system did you go with for your Ridgeline? I have a 2018 and would love functionality like that! Great videos man, so well done!
@JackmanWorks
@JackmanWorks 4 года назад
Yakima rack on the cab (same one from my Element) and Vantech ladder rack on the back. It's all modular so it can hold everything, I love the setup. I'm able to support like 12' total with that setup. Look for my Ridgeline pinned Instagram story for more details.
@fultronjackson
@fultronjackson 4 года назад
@@JackmanWorks just did, great story man! Have you looked into the rear door-stop hack? Basically order the door stops for the two front doors and install on the rear. Gain a lot more access
@JackmanWorks
@JackmanWorks 4 года назад
No joke, I actually bought those before I even picked up the truck from the dealer lol
@michaelpotase
@michaelpotase 4 года назад
Nice Rack... 2:03 made me do a double take as to what you were doing haha.
@williamellis8993
@williamellis8993 4 года назад
Looks great. How did the wood hold up in operation?
@JackmanWorks
@JackmanWorks 4 года назад
So far so good, did a ~400 roadtrip with it so far and it didn't even flinch, I'm curious to see how it holds up to the elements a year down the road.
@williamellis8993
@williamellis8993 4 года назад
@@JackmanWorks Let us know.
@JackmanWorks
@JackmanWorks 4 года назад
@@williamellis8993 will do! keep an eye on my Insta, I'll be sure to mention it there from time to time
@rainwater739
@rainwater739 4 года назад
Now, don't forget to thoroughly mix, mix, mix, mix, mix, mix, mix, mix, mix, mix, mix, mix, mix, mix, mix, and scrape.
@TotalBoat
@TotalBoat 4 года назад
best part of the video....
@dalevalentine1721
@dalevalentine1721 4 года назад
Scarf joint, laminating, Total Boat, Thixo? I thought that Louis S. was back. Maybe it is time to build a palletwood boat in your backyard. Sort of like "acorn to shipping pallet to China, back to US, to Jackman"
@TotalBoat
@TotalBoat 4 года назад
THIS!! The world misses Louis! Us too!
@JackmanWorks
@JackmanWorks 4 года назад
Summer 2020, a Jackman boat is coming (no joke), get excited!!
@SilvaSRT4
@SilvaSRT4 4 года назад
Very nice. Careful with that carbon fiber though, the dust can be really harmful if you arent wearing a respirator or cutting it in a water bath.
@JackmanWorks
@JackmanWorks 4 года назад
Yep! That's why you see me wearing my PowerCap respirator the whole time, not taking any chances. (same thing with the Corian too)
@PJGalati
@PJGalati 4 года назад
"because they weren't sexy enough" is 80% of the reason I do things in my shop ;) the other 20% are too sexy, gotta mess 'em up a little. :P btw Paul, when does the new mix tape drop?
@myxology
@myxology 4 года назад
Wow! Did that make your truck faster? ;)
@JackmanWorks
@JackmanWorks 4 года назад
Not any faster, but it did increase my fuel efficiency 3x!
@michaelru7251
@michaelru7251 4 года назад
Cool👍👍
@joelbutler7501
@joelbutler7501 4 года назад
That truck will never be Jackman enough - there isn't any orange on it.
@JackmanWorks
@JackmanWorks 4 года назад
Orange vinyl wrap coming summer of 2020! (no joke)
@amyln
@amyln 4 года назад
Is it possible to fall in love with how a video is edited? Because I swear it happens every time I watch a video!
@aliasks6559
@aliasks6559 4 года назад
Do you speed up your videos by a little bit? It sorta seems like it. Also, if you advertise something mid-video with those cool animations and bubbles, keep the text there a bit longer, I had to scroll back every time bc I didnt have time to read and then look what you were advertising! Other than that - those TotalBoat products seem incredible if they can hold such a delicate piece of wood together through the weather and wind! Great job to both of you!
@JackmanWorks
@JackmanWorks 4 года назад
Nope, no speeding up the clips, just lots of cuts. I'll keep that in mind to keep the bubbles up longer, thans!
@007Narsil007
@007Narsil007 4 года назад
Great video but please leave your product bubbles up for a few seconds longer. I had pause and rewind for each as it was gone almost as soon as I noticed it there.
@JackmanWorks
@JackmanWorks 4 года назад
Will do!
@PabloGuillermo
@PabloGuillermo 4 года назад
👍 👏
@rockclimbing3844
@rockclimbing3844 4 года назад
Great upgrade video end caps always fall off
@SantaClausHell
@SantaClausHell 4 года назад
I consulted some doctors and they all agreed: This channel suffers from a very bad case of Acute Underrated-ness. The cure for it is to quadruple the subscriber amount. Get well soon.
@JackmanWorks
@JackmanWorks 4 года назад
In the meantime I'll just keep doing what I do, I'm enjoying it so far :)
@SantaClausHell
@SantaClausHell 4 года назад
Awesome. That’s what got all of us here! Cheers
@ryanhendricks7304
@ryanhendricks7304 4 года назад
I like the uncomfortable eye contact. Thank you...
@JackmanWorks
@JackmanWorks 4 года назад
It's something I can always provide
@johnmills1160
@johnmills1160 4 года назад
Clever sod
@mr.mickles
@mr.mickles 4 года назад
At 1:30 it sounded like he was mad at me.
@JackmanWorks
@JackmanWorks 4 года назад
If you didn't mix your epoxy enough last time you used some, then I am mad at you!
@Tkschelle
@Tkschelle 4 года назад
If you didn't get the Total Boat socks along with the shirst and vest...are you truly really even sponsored by Total Boat?
@JackmanWorks
@JackmanWorks 4 года назад
I'm still disappointed they don't have a belt to fit me along with socks too
@dagopulido5952
@dagopulido5952 3 года назад
l think you are just showing of your skills ,most of us are not going to have the high tech equipment wise guy !
@mikehoncho6737
@mikehoncho6737 3 года назад
Now onto the next project to build yourself a real truck.
@3rd_stall
@3rd_stall 4 года назад
If this cars a Rockin', don't bother Knockin'.
@Wordsnwood
@Wordsnwood 4 года назад
"... just weren't sexy enough." --- Paul Jackman, making woodworking Sexy.
@fulanadetal7710
@fulanadetal7710 4 года назад
As usual :)
@JackmanWorks
@JackmanWorks 4 года назад
That's what my business cards say
@krtwood
@krtwood 4 года назад
All this work just to be replaced by a pallet wood veneered Tesla triangle on wheels.
@JackmanWorks
@JackmanWorks 4 года назад
Hey, I'll get 2 years out of this until the inevitable Pallet Cybertruck happens!
@unperrier5998
@unperrier5998 4 года назад
He' pressing epoxy as he would wood glue but I've hear on other channels that epoy is different than wood: it shouldn't be pressed hard at all. Just contact, not pressure.
@SwitchAndLever
@SwitchAndLever 4 года назад
It depends. Clamping epoxy is generally totally fine, as long as you clamp it to the point of it starting to squeeze out. You don't want to apply so much pressure you squeeze all the glue out of the joint. Remember that more glue than needed in a joint does not make the joint stronger. If you just lay the pieces together the layer of glue inbetween the pieces will be thicker than if you clamp them together.
@TotalBoat
@TotalBoat 4 года назад
@@SwitchAndLever we make a THIXO called Thixo Gap for that very reason - it contains some microbeads to maintain the gap when gluing and to avoid squeezing it all out with clamping.
@JackmanWorks
@JackmanWorks 4 года назад
Correct, I used just enough pressure to hold everything together, but not squeeze all of the adhesive out. Also, the Corian has a rough and smooth side, so I made sure to have the rough side on the inside for both sheets so that the adhesive can get the best grab.
@unperrier5998
@unperrier5998 4 года назад
@@JackmanWorks Tanks, the number of clamps let me think that you'd use a lot of force but it was more a visual effect then :)
@craigleemehan
@craigleemehan 4 года назад
To make your own, just follow this simple 103 step process.
@JackmanWorks
@JackmanWorks 4 года назад
That describes my entire channel :)
@marcusretaken72
@marcusretaken72 4 года назад
I'm sorry, but there wasn't enough pain and suffering in this video Paul. This one just seems way too straight forward and you even had to invent drama with that break :P j/k Great work as usual. Glad to see you are not torturing yourself (pencils) on this project!
@JackmanWorks
@JackmanWorks 4 года назад
Now what you didn't see what me working on those stupid pencils still between steps with all of the curing time on this project haha
@JOEGGGJOE
@JOEGGGJOE 4 года назад
Total Boat 👍
@JackmanWorks
@JackmanWorks 4 года назад
Totally!
@johnmills1160
@johnmills1160 4 года назад
Who the hell is John Mills?
Далее
Skateboards made out of Pallet Wood
12:49
Просмотров 997 тыс.
Что не так с воздухом в Корее?
00:45
Каха заблудился в горах
00:57
Просмотров 3,4 млн
Covering a Wall in Pallets (and hidden resin sign)
9:30
Build an Automated Hydroponic System
15:21
Просмотров 1,4 млн
Pallet Wood Pencils (1,000 of them!)
9:47
Просмотров 343 тыс.
Stop the Smoke, Do THIS to Your Fire Pit
16:15
Просмотров 8 млн
Fast and Furious: New Zealand 🚗
0:29
Просмотров 15 млн
Клавиатура для девушек
0:14
Просмотров 3,8 млн
Самые крутые игрушки
0:48
Просмотров 2,9 млн